Whirlpool EXCELLENCE WA 1400 INSTRUCTION FOR USE

4gb05037.fm Page 1 Tuesday, February 18, 2003 5:05 PM
GB EXCELLENCE WA 1400 PROGRAMME GUIDE
This washing machine is equipped with
automatic safety functions
A. “Tap Off” indicator
Check your washing machine's water supply.
B. “Water Stop” indicator
Can be released by excess foaming or a leak in the appliance (see also instructions for use “Troubleshooting”).
which detect
A
B
D
C
E
F
G
H
C. “Door Free” indicator D. “Start/Pause” button E. Programme sequence indicator
{
F. Temperature selection buttons G. “Speed Reduction“ button H. Operation indicators
Programme
Coloured
Cotton
Synthetic
Daily Mixed
Delicate
Wool
Rapid wash
Handwash
Rinse +
Spin
Intensive
Spin
Gentle spin
Drain / Cancel
Koch-
Buntwäsche
Pflegeleicht
Mischwäsche
Feinwäsche
Wolle
Schnelle
Wäsche
Handwäsche
Spülen +
Schleudern
Intensiv
schleudern
Schon-
schleudern
Abpumpen /
Löschen
Max.
load
Care
Labels
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally soiled blouses, shirts and other outer clothing made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetic fibres.
Curtains and delicate dresses, skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Hardly worn outer and sport clothing made of cotton, polyester, polyamid and mixed cotton fabrics.
Textiles made of linen, silk, wool or viscose marked as “handwashable”.
–– ––
––
Type of wash/
Degree of soiling
Kg
5.0
2.5
3.0
1.5
1.0
3.0
1.0
5.0
5.0
1.5
–––
Detergent and Additives
Softe-
ner
❉ ❉
❉ ❉
Main wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
–––
Pre-
wash
Pre-
wash
Vor-
wäsche
❉❉❉❉❉❉❉
❉❉❉❉❉ 1)❉❉
––
❉❉
–––
–––
–––
Selectable special options =
Intensive
Rinse
Intensiv
Spülen
Rinse
hold
Spül-
stopp
❉❉❉ ❉
❉❉ ❉❉
❉❉
❉❉
❉❉
––––––
––––––
Speed
reduction
Schleudern
1)
1)
2)
1)
Eco
Öko
Tem p e-
rature
°C rpm
20
to 95
20
to 60
30
to 60
20
to 40
20
to 40
20
to 60
20
to 30
20 1400
Easy
ironing
Leicht
Bügeln
–– ––
––
–– ––
–––
–––
Max.
spin
speed
“Prewash” can be additionally selected for
1400
heavily soiled laundry at any temperature.
“Prewash” can be additionally selected for
1)
1000
heavily soiled laundry.
In this programme the spin speed should be
1400
adapted to the fabrics.
1)
1000
If you select “Rinse Hold” do not leave items
1)
1000
to soak for too long.
1400
If you select “Rinse Hold” do not leave items to
2)
soak for too long. A very gentle spin is used in
400
this programme. Same as the spin cycle in the “Coloured Cotton”
programme. In this programme spinning is intensive. Same as
1400
the spin cycle in the “Coloured Cotton” programme.
A very gentle spin is used in this programme.
1)
1000
Same as the spin cycle in the “Wool” programme.
This programme only drains (alternative method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.
Notes
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
5019 401 05037
4gb05037.fm Page 2 Tuesday, February 18, 2003 5:05 PM
CONSUMPTION DATA
Programme Temp er at ure
(°C) Coloured Cotton Coloured Cotton Coloured Cotton
Daily Mixed
Synthetic Synthetic
Rapid wash
Delicate
Wool
Handwash
* Consumption
programme duration
** The
particular household conditions and to adapt the programme run time accordingly.
*** To reduce
the pump drains the water out.
values
were measured in normalized conditions in compliance with Standard IEC 60456.
the water temperature
95 5.0 44*** 1.60 1:55 60 5.0 39 0.95 2:00 40 5.0 39 0.55 2:00 40 3.0 46 0.58 1:00 60 2.5 55*** 0.70 1:30 40 2.5 50 0.50 1:15 30 3.0 35 0.40 0:30 30 1.5 50 0.50 0:45 40 1.0 50 0.50 0:40 30 1.0 35 0.40 0:35
may also vary from the chart values. The washing machine is able to allow for
, some cold water is added at the end of the main wash cycle, before
POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter Detergent and Additives in the booklet.
1. Turn the
programme selector knob
any direction to the desired programme. The pilot lamp above the
Pause
button is flashing.
Start/
2. The programme sequence indicator and the indicator with the maximum possible spin speed light up.
3. The temperature can be altered by pressing
+
the
“-”
or
button under the
corresponding LED display.
SELECT SPECIAL OPTIONS ­The indicator lights go on.
Prewash button
Only for heavily soiled laundry (for example
sand or granular dirt). Programme duration is increased by some 15 min.
Intensive Rinse button
Wash
(kg)
in
Water
(l)
Rinse Hold button
The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.
This additional option is particularly recommended for the programme
Synthetics or Delicates”.
This additional function is particularly
useful if you want to postpone spinning to a later time.
Note:
The programme has reached the Rinse Hold when the Rinse Hold button light flashes.
Terminate the Rinse Hold option:
Press the Rinse Hold button again; the
programme will terminate automatically with the appropriate spin cycle for the current programme.
If you do not wish to spin the clothes, turn
the programme selector knob to “Drain/ Cancel and press the button again.
An additional rinse cycle is carried out.
This additional option is particularly
suitable for areas with very soft water, for washing baby linen and helping people with detergent allergies.
Energy
(kWh)
Programme duration **
approx.
(hours : minutes)
Start/Pause
Speed Reduction button
A maximum spin speed is assigned to each programme.
Press the button to set another speed for the spin cycle.
If the spin speed 0 is selected, the final spin is cancelled. The water is only drained out.
Easy Ironing button
To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme.
Eco Wash button
The duration of the wash is extended and the temperature reduced. This saves you up to 40% energy and maintains good washing results.
PROGRAMME START
After you have selected the programme and the additional option, the indicator light over
Start/Pause
the
button flashes. Turn on
the tap and start the programme by pressing
Start/Pause
the
button. Now the indicator
light above the button goes on. In addition, all programme phases are
indicated by the associated lights. After the end of a programme phase the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme only the End indicator is still on.
DOOR LOCK
In the first 15 minutes after the start of the Cotton, “Cotton coloured and Synthetic programmes the door can be opened to add further laundry. This is not possible if “Rapid Wash is selecte.
PROGRAMME END
The End indicator lights up.
1. Turn the programme selector knob to the Off position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.
1. Press the
Start/Pause
button to interrupt the programme. The indicator light flashes.
2. Select the new programme (with temperature), any additional options and
- if you wish - another spin speed.
3. Press the
Start/Pause
button again to
restart the programme.
If you are in the Prewash programme step this additional option can not be deselected as described (to do this see “Interrupt/Cancel Programme).
CANCEL/DELETE PROGRAMME
1. Press the
Start/Pause
button to interrupt the programme. The indicator light flashes.
2. Set the programme selector to “Drain/ Cancel. The spin speed
0
and the
remaining time 2 minutes are displayed.
3. Press the
Start/Pause
button to start the
Drain/Cancel programme.
5019 401 05037
Loading...