Whirlpool EVIDENCE 7543 INSTRUCTION FOR USE

GB Evidence 7543

PROGRAMME TABLE

Programme selector

Temperature knob

Spin Speed knob Eco option

Half-Load option

Rinse Hold option On/Off button

1)For improved garment care, spin speed is restricted.

2)Programme duration figures (guideline) are valid for maximum temperature wash with no special functions.

Programme	Type of fabrics / Degree of soiling / Notes	Max.	Detergent and Additives														Options				Temperature	Maximum	Recommended	Programme
		Load																			selector	technical	Spin	Duration
			Pre-	Wash			Softener			Bleach				Eco			Half-	Rinse				Spin	Speed	approx.
			wash													Load			Hold
																						Speed
		kg																			°C	rpm/min	rpm/min	min 2)
Cotton with	Heavily soiled, hard wearing and temperature stable textiles
	in cotton and linen (bed linen, table linen, underwear, shirts	5,0	Yes	Yes																	Cold to 90	750	750	130
Prewash
	etc.). The max. load for heavily soiled laundry is 3,5 kg.
Cotton	Averagely soiled, hard wearing and temperature stable
	textiles in cotton and linen (bed linen, table linen,	5,0	Yes	Yes																	Cold to 90	750	750	115
	underwear, shirts etc.).
Coloured	Averagely soiled blouses, skirts, etc. made of polyester		—								—			—
	(Diolen, Trevira), polyamide (Perlon, Nylon) or cotton	2,0		Yes																	Cold to 60	750	500 to 750	100
	blends.
Rapid	Lightly soiled textiles in cotton or linen blouses, shirts, dark	5,0	—	Yes				—			—		—								Cold to 40	750	500 to 750	85
	coloured terry cloth, coloured linen articles, jeans, etc.
Synthetics	Lightly soiled blouses, skirts, etc. made of polyester (Diolen,	2,0	—	Yes							—			—							Cold to 60	750	500 to 750	70
	Trevira), polyamide (Perlon, Nylon) or cotton blends.
Rinse + Spin	Programme for treating wash with starch or softener.	5,0	—	—							—			—							Cold	750	500 to 750	20
	Terminates with an Intensive Rinse cycle.
Spin	Programme for Intensive spin cycle.	5,0	—	—				—			—		—			—		—			—	750	500 to 750	10
Delicate	Delicate curtains, dresses, skirts and blouses.	1,5	—	Yes							—			—		—					Cold to 40	600 1)	100 to 450	55
Wool	Only machine washable woollens with pure new wool label.		—								—			—		—						600 1)
	If you select the special function “Rinse Hold” don’t leave	1,0		Yes																	Cold to 30		100 to 450	45
	garments to soak for too long.
Rinse + Spin	Programme for treating wash with starch or softener.	5,0	—	—							—			—		—					Cold	600 1)	100 to 450	15
	Terminates with a gentle spin cycle.
Spin	Programme for gentle spin cycle.	1,5	—	—			—				—			—		—		—			—	600 1)	100 to 450	5
Drain	Drain only, without spin cycle. Alternative way of terminating	—	—	—			—				—			—		—		—			—	—	—	3
	programmes with “Rinse Hold” setting.

N.B. The excess of detergent in the dispenser could cause technical problems.

5019 100 12560

GB

CONSUMPTION DATA

	Programme		Temperature						Load				Water					Energy				Programme
				selector																			duration
					°C				(kg)					(l)				(kWh)						(min)
	Cotton		90					5,0				72					1,8				115
	Cotton		60					5,0				69					1,15				115
Coloured			40					2,0				54					0,4				100
Rapid + Half Load			40					2,5				49					0,5				85
Synthetics + Half Load			30					1,5				45					0,3				70
Delicate			40					1,5				70					0,65				55
	Wool		40					1,0				70					0,55				45

Pre-wash cycle increases programme duration by approx. 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADDING DETERGENT AND ADDITIVES

Add the detergent and the additives into the dispenser as follows:

• Programmes with preand main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (water hardness 4)

Important:

•Be careful not to fill more than the “MAX” level mark.

•For programmes with prewash: do not use liquid detergents.

•For programmes without prewash from cold to 40° C, it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1.Turn the programme selector knob ” clockwise to the desired programme/ temperature.

2.Turn the temperature knob to” the required temperature.

3. Turn the spin speed selector

” to the required setting.

PRESS ANY DESIRED OPTION(S) “Eco” button

•The wash time is extended and the water temperature is reduced.

•This function save about 30% in energy without compromising the excellent results of the wash.

“Half Load” button

•Reduces water consumption in the cotton and synthetic programme, above all during pre-wash and rinse.

•Especially suitable for lightly soiled or small loads (reduce the detergent quantity).

“Rinse Hold” button

•The laundry remains in the last rinse water without progressing to the spin cycle to avoid creasing and prevent colours from changing.

•This option is particularly recommended for the programme Synthetics or Delicate.

•This function is particularly useful if you want to postpone spinning to a later time

Note: The programme selector knob stops on the position “ ”.

Terminate the “Rinse Hold” option:

•Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle for the present wash programme.

•If you do not wish to spin the clothes, switch off the appliance, turn the programme knob to the drain programme and switch on the appliance again.

PROGRAMME START

Open the tap and press the “On/Off ” button. The pilot lamp lights up.

DOOR LOCK

During the running programme the door cannot be opened.

The door locks automatically in all programmes. If the programme is stopped or the electrical power supply is terminated, the door lock will open after approximately 1 minute.

PROGRAMME END

•The programme selector knob is at “Stop”.

1.Press the “On/Off” button.

2.Cancel the special options by pressing the appropriate buttons.

3.Turn the water supply tap off.

4.Wait for the door to unlock (about 1 minute).

5.Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1.Press the “On/Off” button to switch off the appliance.

2.Select the new programme, temperature, spin speed and option.

3.Press the “On/Off” button to switch on the appliance.

TO STOP, RESET A PROGRAMME BEFORE THE END

1.Press the “On/Off” button to switch off the appliance.

2.Set the programme selector to “Drain”.

3.Press the “On/Off” button to start the drain programme.

Only open the door when the programme selector is at “Stop” and the door is unlocked (after approximately 1 minute).

5019 100 12560