Whirlpool ETIGJK User Manual

El
i
0
NO-FROST REFRIGERATOR-
FREEZER
Model ETIGJK
-
Please read this Use and Care Guide
before you do anything else.. .
This booklet tells you how to start your refrig­erator, clean it, move shelves and adjust con­trols. It even tells you what new sounds to expect from your refrigerator.
Treat your new refrigerator with care. Use it only to do what home refrigerators are de­signed to do.

Parts and features

Ice Trays -
Refrigerato
Control I
Light ­Power Savil
Control -
Freezer
Control H
Slide-Out Adjustable
Shelves
Crisper Cover -
Crispers -
Levelling Le’
& Roller
1 -.
! ik fl!A7! -l
Model and Serial
Number Plate
\
Egg Nest
1 Butter
- Stationary
Juice Can
Rack
Compartment
Shelves
Copy your Model and Serial Numbers here...
I
When you need service cx call with a Question,
I
have this Inform&on ready,
I
1 1. Comdete Model and Serial Numbers (from the
plate’located as shown).
2. Purchase date from sales slip Copy this Information In these spaces. Keep this
book, your warranty and sales handy place.
2
slip
\
together in a
Model Number
Serial Number
Purchase Dote
Service Company and Telephone Number
Contents

SAFETY FIRST

BEFORE YOU PLUG IT IN

Install Properly Level Refrigerator-Freezer Remove Soles Labels Clean It Plugltln
USING YOUR RkiIGERAi6R : : :
Sethng the Controls.
Power Saving Control : : Changing the Control Settings Adjustjng the Shelves Removing the Crispers and Cover IceCube Trays Optional Automatjc Ice Maker
: :
Page
3
Nhrrlpool Corporation
Changing the Light Bulb Sounds You May Hear Energy Saving Tips
CLEANING YOUR REFRtGERATOR :
Cleaning Chart
FOODSTORAGEGUIDE
Storing Fresh Food
Storing Frozen Food VACATION AND MOVING CAiiE : : : : : : 10 IF YOU NEED SERVICE OR ASSISTANCE
1. Before Calling for Ass&once
2. If You Need Assistance : 11
3.IfYouNeedService
4.IfYouHaveaProblem 11
Page
7
: 7
7
: : 7
8
: 9 : : 9
10
11 11
11
Before you plug it in
,. .a
IMPORTANT
Before using your refrigerator, you ore personally responsible for making sure that it...
l
is installed and leveled on a floor that will hold
the weight, and in on area suitable for its size
and use.
l
is connected only to the right kind of outlet, with the right electric supply and grounding.
l
is used only for jobs expected of home
refrigerators.
,
l
is properly maintained.
l
is out of the weather.
l
is used in on area where the room temperature
will not fall below 55” F (13” C].
l
is not run where there ore explosive fumes.
l
is not used by children or others who may not
understand how it should be used.
l
is not loaded with food before it has time to get
properly cold.
Install properly.. .
i
3II
I I
m
1 Allow 3 inches (7.5 cm] between overhead cab-
inets and the refrrgerator top.
2. Allow at least an inch (2.5cm) between the refrrg­erator condenser and the wall
3. Allow % inch (1.25 cm) on each srde of the re­frigerator for ease of installation.
4. If the refrigerator is to be against a wall, you might want to leave enough space so the door can be opened wider.
Level refrigerator-freezer...
Remove sales labels.. .
Remove the Consumer Buy Guide label. tape and
any inside labels before using the refrrgerator. To remove any remaining glue:
1 Rub briskly with thumb to make a bail then remove. OR 2 Soak area with dishwashing detergent solution (1
teaspoon detergent In 1 quart warm water] before removing glue as descrrbed In step 1.
DO NOT USE rubbing alcohol or flammable or
toxic solvents, such as acetone, gasoline, car-
bon tetrachloride, etc. These can damage the
material.
NOTE: DO NOT REMOVE ANY PERMANENT IN-
STRUCTION LABELS INSIDE YOUR REFRIGERATOR.
Do not remove the Tech Sheet fastened under
the refrigerator at the front.
Clean it.. .
Clean your refrigerator before using it See clean-
ing instructrons on pages 7 and 8.
Plug it in...
3-prong
grounding type
wall receptacle
Raise
This refrigerator has 2 threaded levelling legs that are shipped in a separate package.
1. Screw these legs all the way into bolt holes in the bottom front corners of refrigerator
2. Roll the refrigerator into place.
3. Lower legs just enough to lift front rollers off floor. 4 Adjust front legs to level the refrigerator
~ To raise corners, turn legs counterclockwise.
-
To lower corners, turn legs clockwise.
5. Check with level.
Refrigerator
Power Cord
RECOMMENDED GROUNDING METHOD
A 115 Volt, 60 Hz, AC only 15 or 20 ampere fused and properly grounded electrical supply quired It serving only this appliance be provided
Do not use an extension cord. Use a recep­tacle which cannot be turned off with a switch or pull chain. See individual electrrcal requlre­ments and grounding Instructron sheet in your Irter­ature package.
IS
recommended that a separate circurt
IS
re-
Loading...
+ 8 hidden pages