How it Works
Whirlpool
Loading...
ET8WTKXVT00
User Manual
10 pgs763.47 Kb0
Owner’s Manual
56 pgs9.24 Mb0

Whirlpool ER8VHMXTQ01, ER8AHMXRQ01, ER8AHMXRL02, ER8AHKXRB02, W4TXNWFWT03 Owner’s Manual

...
2316016
TABLEOFCONTENTS
REFRIGERATOR SAFETY ............................................................. 3
Proper Disposal of Your Old Refrigerator .................................... 3
INSTALLATION INSTRUCTIONS .................................................. 4
Unpack the Refrigerator ............................................................... 4
Location Requirements ................................................................ 4
Electrical Requirements ............................................................... 5
Water Supply Requirements ........................................................ 5
Connect the Water Supply ........................................................... 5
Refrigerator Doors ........................................................................ 6
Adjust the Doors ......................................................................... 10
Normal Sounds .......................................................................... 10
REFRIGERATOR USE .................................................................. 10
Ensuring Proper Air Circulation .................................................. 10
Using the Controls ..................................................................... 11
Ice Maker .................................................................................... 11
REFRIGERATOR FEATURES ...................................................... 12
Refrigerator Shelves ................................................................... 12
Meat Drawer ............................................................................... t2
J
INDICE
CGmo deshacerse adecuadamente de su refrigerador viejo ....20
Desempaque el refrigerador ...................................................... 21
Requisitos de ubicaciGn ............................................................. 21
Requisitos electricos .................................................................. 22
Requisitos del suministro de agua ............................................. 22
ConexiGn del suministro de agua .............................................. 22
Puertas del refrigerador ............................................................. 24
Ajuste las puertas ....................................................................... 27
Sonidos normales ...................................................................... 28
CGmo asegurar la debida circulaciGn de aire ............................ 28
Usa de los controles .................................................................. 29
Fg_bricade hielo .......................................................................... 29
Estantes del refrigerador ............................................................ 30
CajGn para carnes ...................................................................... 30
Crisper ........................................................................................ 12
Utility or Egg Bin ......................................................................... 13
FREEZER FEATURES .................................................................. 13
Freezer Shelf ............................................................................... 13
DOOR FEATURES ........................................................................ 14
Door Rails ................................................................................... 14
Can Racks and Door Bins .......................................................... 14
REFRIGERATOR CARE ............................................................... 14
Cleaning ...................................................................................... 14
Changing the Light Bulbs ........................................................... 15
Power Interruptions .................................................................... 15
Vacation and Moving Care ......................................................... 15
TROUBLESHOOTING .................................................................. 16
ASSISTANCE OR SERVICE ......................................................... 18
In the U.S.A................................................................................ 18
In Canada ................................................................................... 18
Accessories ................................................................................ 18
WAR RANTY .................................................................................. 19
CajGn para verduras ................................................................... 30
Compartimiento para huevos o alimentos ................................. 31
Estante del congelador .............................................................. 31
Rieles de la puerta ...................................................................... 32
Portalatas y recipientes de la puerta ......................................... 32
Limpieza ..................................................................................... 32
CGmo cambiar los focos ............................................................ 33
Cortes de corriente ..................................................................... 33
Cuidado durante las vacaciones y mudanzas ........................... 33
En los EE.UU.............................................................................. 36
En Canad_i .................................................................................. 36
Accesorios .................................................................................. 36
TABLEDESMATIERES
Mise au rebut de votre vieux refrigerateur ................................. 38
INSTRUCTIONS D'INSTALLATION ........................................... 39
Deballage du refrigerateur ......................................................... 39
Exigences d'emplacement ......................................................... 39
Specifications electriques .......................................................... 40
Specifications de I'alimentation en eau ..................................... 40
Raccordement de la canalisation d'eau .................................... 41
Portes du refrigerateur ............................................................... 42
Ajustement des portes ............................................................... 46
Sons normaux ............................................................................ 46
Pour s'assurer d'une circulation d'air appropriee ..................... 46
Utilisation des commandes ........................................................ 47
Machine h gla(_ons ..................................................................... 47
CARACTERISTIQUES DU REFRIGI:!:RATEUR .......................... 48
Tablettes du refrigerateur ........................................................... 48
Bac a viande ............................................................................... 48
Bac a legumes ............................................................................ 49
Casier utilitaire ou oeufrier .......................................................... 49
Clayette du congelateur ............................................................. 50
Tringles dans la porte ................................................................. 50
Porte-cannettes et balconnets ................................................... 50
Nettoyage ................................................................................... 51
Remplacement des ampoules d'eclairage ................................ 51
Pannes de courant ..................................................................... 52
Entretien avant les vacances ou Iors d'un demenagement ....... 52
Accessoires ................................................................................ 55
REFRIGERATORSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the refrigerator, follow basic precautions,
including the following:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter. [] Do not use an extension cord.
• Disconnect power before servicing.
• Replace all parts and panels before operating.
• Remove doors from your old refrigerator.
SAVE THESE INSTRUCTIONS
• Use nonflammable cleaner.
• Keep flammable materials and vapors, such as gasoline, away from refrigerator.
• Use two or more people to move and install refrigerator.
• Disconnect power before installing ice maker (on ice maker kit ready models only).
Proper Disposal of Your Old Refrigerator
Suffocation Hazard Remove doors from your old refrigerator, Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous
- even if they will sit for "just a few days." If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:.
• Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
INSTALLATIONINSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
Remove the Packaging
Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For more information, see "Refrigerator Safety."
On some models, shelves, bins, door shelf rails, and other feature parts may be packaged in the Interior FeaturePak.
Follow the instructions contained in the package for proper assembly.
There are four bolts that secure the refrigerator to the shipping case. Keep these bolts because they are the
refrigerator's leveling legs.
• Properly dispose of packaging. IMPORTANT: Do not remove the white foam air return insert that
is located behind the control panel on the ceiling of the refrigerator (on some models). The insert is part of the refrigerator and not part of the packing material. If the insert is removed, ice
may migrate down from the freezer and cause icicles to form.
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
To ensure proper ventilation for your refrigerator, allow for a 1/2" (12.70 mm) space on each side. Allow 3" (7.5 cm) of space between overhead cabinets and refrigerator top. Allow at least 1" (25.40 mm) between back of cabinet and the wall. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.
• If you are installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on the hinge side (depending on your model) to allow for the door to swing open.
• Level the refrigerator. See "Adjust the Doors."
NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).
When Moving Your Refrigerator: Your refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or "walk" the refrigerator when trying to move it, as floor damage could occur.
Clean Before Using
After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in "Refrigerator Care."
important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.
3 IN (7.5 Cm) r1_
II I
11I
__ /
/
/
2" (5.08cm)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter. Do not use an extension cord.
Failure to fellow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical
connection.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an
extension cord. NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.
Read all directions before you begin.
IMPORTANT:
• If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.
• All installations must meet local plumbing code requirements.
• Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.
TOOLS NEEDED: Flat-blade screwdriver, 7/16"and 1/2"open-end wrenches or 2 adjustable wrenches, 1/4"nut driver and drill bit, hand drill or electric drill (properly grounded). Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed.
NOTE: Your refrigerator dealer has a kit available with a 1/4" (6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or 3_6" (4.76 mm) saddle valve which reduces water flow and clogs more easily.
Water Pressure
A cold water supply with water pressure of between 30 and 120 psi (207-827 kPa) is required to operate the ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.
Reverse Osmosis Water Supply If a reverse osmosis water filtration system is connected to your
cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 - 414 kPa).
If the ice maker is still not operating properly:
• Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.
• Allow the storage tank on the reverse osmosis system to refill after heavy usage.
If you have questions about your water pressure, call a licensed, qualified plumber.
Read all directions before you begin. IMPORTANT: If you turn the refrigerator on before the water line
is connected, turn the ice maker OFF.
Connect to Water Line
1. Unplug refrigerator or disconnect power.
2. Turn OFF main water supply. Turn ON nearest faucet long
enough to clear line of water.
3. Locate a 1/2"to 11/4'' (1.27 cm to 3.18 cm) vertical cold water pipe near the refrigerator.
IMPORTANT:
• Make sure it is a cold water pipe.
• Horizontal pipe will work, but drill on the top side of the
pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.
4.
Determine the length of copper tubing you will need. Measure from the connection on lower left rear of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use 1/4" (6.35 mm)O.D. (outside diameter)copper tubing. Be sure both ends of copper tubing are cut square.
5=
Using a grounded drill, drill a 1/4"hole in the cold water pipe you have selected.
' ......... C
A. Cold water pipe E.Compression sleeve B. Pipe clamp F. Shutoff valve
C. Copper tubing G.Packing nut D. Compression nut
6. Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the 1/4"drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.
7. Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.
8. Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.
Connect to Refrigerator
NOTE: On kit models, assemble water valve to refrigerator per kit
instructions.
Style 1
1. Unplug refrigerator or disconnect power.
2. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.
3. Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.
4. Turn shutoff valve ON.
5. Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.
Complete the Installation
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord, Failure to follow these instructions can result in death,
fire, or electrical shock.
Plug into a grounded 3 prong outlet. NOTE: Allow 24 hours to produce the first batch of ice. Discard
the first three batches of ice produced. Allow 3 days to completely fill ice container.
A. Tube clamp
B. Copper tubing
6=
The ice maker is equipped with a built-in water strainer. Ifyour
C. Compression nut D. Valve inlet
water conditions require a second water strainer, install it in the 1/4"(6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.
Style 2
1. Unplug refrigerator or disconnect power.
2. Disconnect the tube clamp on the back of the product and insert the copper tubing through the clamp as shown.
3. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown.
4. Tighten the compression nut. Do not overtighten. Reattach the tube clamp and tube to the back of the cabinet.
"_ A
_ C
..-0
A. Tube clamp C. Compression nut B. Copper tubing
5. Turn shutoff valve ON. Check for leaks. Tighten any connections (including connections at the valve) or nuts that
leak.
6. The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the 1/4"(6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.
TOOLS NEEDED: %6" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, %6" open-end wrench, flat 2" putty knife.
IMPORTANT:
• Before you begin, turn the refrigerator control OFR Unplug refrigerator or disconnect power.
• Remove food and adjustable door or utility bins from doors.
• If you are only removing and replacing the doors, see the "Remove Doors and Hinges" and "Replace Doors and Hinges" sections.
Depending on your model, you may have standard (Style 1) or contoured (Style 2) doors. If you are also going to reverse the door swing, follow the instructions for the appropriate door style.
Remove Doors and Hinges
5/16"Hex-Head Hinge Screw
1=
Unplug refrigerator or disconnect power.
2.
Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.
NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.
3. Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.
4. Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.
5. Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.
Reverse Doors (optional)
IMPORTANT: If you want to reverse your doors so that they open
in the opposite direction, follow these steps. If you are not reversing the doors, see "Replace Doors and Hinges."
Style I - Standard Graphics follow these instructions.
Door Stop Screw
Door Handle Sealing Screw
Flat-Head Handle Screw
DoorHinge Hole Plug
Cabinet Hinge Hole Plug
Door Handle Screw Cover
Style 2 - Contoured Graphics follow theseinstructions.
Round-Head Door Handle
Handle Screw Screw Hole Plug
Cabinet
1. Remove 5/16"hex-head hinge screws from handle side and move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes as shown. See Graphic 1-2.
Doors
1. Remove door hinge hole plug from top of freezer door. Move to opposite side as shown. See Graphic 2.
2. Remove door stop from both the freezer and refrigerator doors and move to the other side. See Graphic 3.
Door Hinge
Hole Plug
Door Handle Seal Screw Front
Cabinet
1. Remove %6" hex-head hinge screws from handle side and
move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from cabinet top and move them to opposite side hinge holes as shown. See Graphic 1-2.
Freezer door
1. Remove freezer handle assembly as shown. Keep all parts together. See Graphic 2.
2. Remove door hinge hole plug. Move to opposite side as shown. See Graphic 3.
3. Remove door handle sealing screws. Move to opposite side of freezer door as shown. See Graphic 4.
4. Remove door stop. Move to opposite side of freezer door as shown. See Graphic 5.
5. Position freezer handle on opposite side of freezer door. Assemble handle on door as shown. See Graphic 2.
6. Tighten all screws. Set aside door until hinges and refrigerator compartment door are in place.
Refrigerator door
1. Remove the screw cover. See Graphic 6.
2. Remove refrigerator handle assembly as shown. Keep all parts together. See Graphic 6.
3. Remove door hinge hole plug from refrigerator door. Move to opposite side hinge hole as shown. See Graphic 3.
4. Remove door handle sealing screws. Move to opposite side of refrigerator door as shown. See Graphic 4.
5. Remove door handle seal screw front. Move to opposite side of refrigerator door as shown. See Graphic 7.
6. Remove door stop. Move to opposite side of refrigerator door as shown. See Graphic 5.
7. Position refrigerator handle on opposite side of the refrigerator door as shown. See Graphic 6. Drive top two screws in handle first. Align lower portion of handle and drive
bottom screw.
8. Replace screw cover. See Graphic 6.
g. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on refrigerator.
Round-Head Handle Screw
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
1. Replace the parts for the bottom hinge as shown. Tighten screws. Replace the refrigerator door.
NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.
2. Assemble the parts for the center hinge as shown and tighten all screws. See Center Hinge graphic. Replace the freezer
door.
3. Assemble the parts for the top hinge as shown. See Top Hinge graphic. Do not tighten screws completely.
4. Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all
screws.
Final Steps
1. Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See Top Hinge graphic.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in refrigerator or reconnect power.
3. Reset the controls. See "Using the Controls."
4. Return all removable door parts to doors and food to refrigerator.
Style I - Standard
Top Hinge
A.................
A. Cabinet Hinge Hole Plugs
_I? """"'_ °i
/ "w'l.....................................A I
A. s/_,, Hex-Head Hinge
Screws and Washers
A. shs"Hex-Head Hinge Screws
B. Top Hinge C. Spacer
Center Hinge
B C D
E F
A. Door Stop B. Door Stop Screw
C. Spacer D. Center Hinge
E. Sly6"Hex-Head Hinge Screws F, Spacer
Bottom Hinge
_T ...............................................A
A. Door Hinge Hole Plug
/
A. Flat-Head Handle Screws B. Freezer Handle
_T_ A
I\_ "- "i_\1
A. Door Handle Sealing Screws
Front View Side View []
A
/*
./
A. Door Handle
Seal Screw Front
A. Door Stop
B. Spacer
C. Door Stop Screw D. Bottom Hinge E. 5/_6"Hex-Head Hinge Screws
i j
A. Door Stop Screw A B
B. Door Stop
_ ................D
A. Flat-Head Handle Screw B. Refrigerator Handle
C. Handle Screw D, Screw Cover
Style 2 - Contoured
Top Hinge
A. Top Hinge Cover
B. b/_6"Hex-Head Hinge Screws
C. Top Hinge
D. Spacer
Center Hinge
A
B C
E F
A. Door Stop
B. Door Stop Screw
C. Spacer
D. Center Hinge
E. 5hJ Hex-Head Hinge Screws
K Spacer
A. Cabinet Hinge Hole Plugs
)
A. Door Hinge Hole Plug
Removal of Door Stops
iiiiiiiiiiiiii
Bottom Hinge
c
D
E
A. Door Stop
B. Spacer
C. Door Stop Screw D. Bottom Hinge
E. s/_8"Hex-Head Hinge Screws
O
A. Door Stop B. Door Stop Screw
iiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiii
.................................................................................................................................................................................................................................................BDoolStopScrew ............................................................................................................
Reinstallation of Door Stops
©
A. Door Stop
Your refrigerator has two front adjustable rollers - one on the right and one on the left. Ifyour refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using
the instructions below. Depending on your model, your refrigerator may have leveling
legs (Style 1) or leveling screws (Style 2). They are part of the front roller assemblies which are found at the base of the
refrigerator on either side.
1. Turn the leveling legs or leveling screws to the right to raise that side of the refrigerator or to the left to lower that side. It may take several turns to adjust the tilt of the refrigerator.
NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers. This makes it easier to adjust the screws.
2.
Open both doors again and be sure that they close as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns, and you should turn both leveling screws
the same amount.
Style I
Your refrigerator is designed to run more efficiently to keep your food items at the desired temperatures and to minimize energy usage. The high efficiency compressor and fans may cause your refrigerator to run longer than your old one. You may also hear a pulsating or high-pitched sound from the compressor or fans adjusting to optimize performance.
You may hear the evaporator fan motor circulating air through the refrigerator and freezer compartments. The fan speed may increase as you open the doors or add warm food.
Rattling noises may come from the flow of refrigerant, the water line, or items stored on top of the refrigerator.
Water dripping on the defrost heater during a defrost cycle may cause a sizzling sound.
As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your refrigerator.
Contraction and expansion of the inside walls may cause a popping noise.
You may hear air being forced over the condenser by the condenser fan.
You may hear water running into the drain pan during the defrost cycle.
REFRIGERATORUSE
Style 2
3. Using a level, be sure that the refrigerator is still level side to
side. Readjust if necessary.
Your new refrigerator may make sounds that your old one didn't make. Because the sounds are new to you, you might be
concerned about them. Most of the new sounds are normal. Hard surfaces, such as the floor, walls, and cabinets, can make the
sounds seem louder. The following describes the kinds of sounds and what may be making them.
• If your refrigerator is equipped with an ice maker, you will hear a buzzing sound when the water valve opens to fill the ice maker for each cycle.
In order to ensure proper temperatures, you need to permit airflow between the refrigerator and freezer sections. As shown in the illustration, cool air enters through the bottom of the freezer section and moves up. Most of the air then flows through the
freezer section vents and recirculates under the freezer floor. The rest of the air enters the refrigerator section through the top vent.
In some models, cool air enters through the backwall of refrigerator section and moves to the front of the refrigerator and up into the freezer.
Do not block any of these vents with food packages. If the vents are blocked, airflow will be prevented and temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly. See the "Refrigerator Features" section for details.
10
3. Empty the ice bin.
4. Depending on the model, turn the Temperature Control or Refrigerator Control to OFR See "Using the Control(s)."
5. Unplug refrigerator.
6. Empty water from the defrost pan.
7. Clean, wipe, and dry thoroughly.
8. Take out all removable parts, wrap them well, and tape them together so they don't shift and rattle during the move.
TROUBLESHOOTING
Trythe solutions suggested here first in order to avoid the cost of an unnecessary service call.
9. Depending on the model, raise the front of the refrigerator so it rolls more easily OR screw in the leveling legs so they don't scrape the floor. See "Adjust the Doors."
10. Tape the doors closed and tape the power cord to the back of the refrigerator.
When you get to your new home, put everything back and refer to the "Installation Instructions" section for preparation instructions. Also, if your refrigerator has an automatic ice maker, remember to reconnect the water supply to the refrigerator.
Your refrigerator will not operate
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.
Has a household fuse blown, or has a circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.
Is the Temperature Control turned to the OFF position? See "Using the Control(s)."
Is the refrigerator defrosting? Recheck to see whether the refrigerator is operating in 30 minutes. Your refrigerator will regularly run an automatic defrost cycle.
The lights do not work
• Is a light bulb loose in the socket or burned out? See "Changing the Light Bulbs."
There is water in the defrost drain pan
• Is the refrigerator defrosting? The water will evaporate. It is normal for water to drip into the defrost pan.
• Is it more humid than normal? Expect that the water in the defrost pan will take longer to evaporate. This is normal when
it is hot or humid.
The motor seems to run too much
Is the room temperature hotter than normal? Expect the
motor to run longer under warm conditions. At normal room temperatures, expect your motor to run about 40% to 80% of the time. Under warmer conditions, expect it to run even
more of the time.
Has a large amount of food just been added to the refrigerator? Adding a large amount of food warms the
refrigerator. It is normal for the motor to run longer in order to cool the refrigerator back down. See "Refrigerator Features."
Are the doors opened often? Expect the motor to run longer when this occurs. In order to conserve energy, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as
the food is removed. Is the control set correctly for the surrounding
conditions? See "Using the Control(s)," depending on the model.
Are the doors closed completely? Push the doors firmly shut. If they will not shut all the way, see "The doors will not close completely" later in this section.
NOTE: Your new refrigerator will run longer than your old one due to its high-efficiency motor.
The refrigerator seems to make too much noise
• The sounds may be normal for your refrigerator. See "Normal Sounds."
The ice maker is not producing ice or not enough ice
• Has the ice maker just been installed? Wait 72 hours for full ice production to begin. Once your refrigerator is cooled, the ice maker should produce 70-120 cubes every 24 hours.
Is the freezer temperature cold enough to produce ice? Wait 24 hours after hookup for ice production. See "Using the Control(s)," depending on the model.
Is the wire shutoff arm in the OFF (arm up) position? Lower the wire shutoff arm to the ON (arm down) position.
See "Ice Maker."
16
• Is the water line shutoff valve to the refrigerator turned
on? Turn on the water valve. See "Connect the Water
Supply."
Does the ice maker mold have water in it or has no ice been produced? Be sure your refrigerator has been
connected to a water supply and the supply shutoff valve is turned on. See "Connect the Water Supply."
• Is an ice cube jammed in the ejector arm? Remove the ice from the ejector arm with a plastic utensil. See "Ice Maker."
• Has a large amount of ice just been removed? Allow 24 hours for ice maker to produce more ice.
• Is the control set correctly? If too little ice is produced, see "Using the Control(s)," depending on the model.
• Is a reverse osmosis water filtration system connected to
your cold water supply? See "Water Supply Requirements." •
NOTE: If not due to any of the above, there may be a problem
with the water line. Call for service.
Off-taste or gray color in the ice
• Are the plumbing connections new, causing discolored or off-flavored ice? Discard the first few batches of ice.
• Have the ice cubes been stored for too long? Throw away old ice and make a new supply.
• Has food in the refrigerator been wrapped properly? See "Refrigerator Features."
• Do the freezer and ice bin need to be cleaned? See "Cleaning."
• Does the water contain minerals (such as sulfur)? A filter may need to be installed to remove the minerals.
There is interior moisture buildup
• Are the air vents blocked in the refrigerator? Remove any objects from in front of the air vents. See "Ensuring Proper Air
Circulation" for the location of air vents. Are the door(s) opened often? To avoid humidity buildup,
try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed. When the door is opened, humidity from the room air enters the refrigerator. The more often the door is opened, the faster humidity builds up,
especially when the room itself is very humid. Is the room humid? It is normal for moisture to build up
inside the refrigerator when the room air is humid. Is the food packaged correctly? Check that all food is
securely wrapped. Wipe off damp food containers before placing in the refrigerator.
Are the controls set correctly for the surrounding conditions? See "Using the Control(s)," depending on the
model. Was a self-defrost cycle completed? It is normal for
droplets to form on the back wall after the refrigerator self- defrosts.
The doors are difficult to open
The divider between the two compartments is warm
The warmth is probably due to normal operation of the automatic exterior moisture control. If still concerned, call for service.
Temperature is too warm
Are the air vents blocked in either compartment? This
prevents the movement of cold air from the freezer to the refrigerator. Remove any objects from in front of the air vents. See "Ensuring Proper Air Circulation" for the location of air
vents. Are the door(s) opened often? Be aware that the refrigerator
will warm when this occurs. In order to keep the refrigerator cool, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the
door as soon as the food is removed.
Has a large amount of food just been added to the refrigerator or freezer? Adding a large amount of food
warms the refrigerator. It can take several hours for the refrigerator to return to the normal temperature.
• Are the controls set correctly for the surrounding conditions? See "Using the Control(s)," depending on the model.
Explosion Hazard
Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.
• Are the gaskets dirty or sticky? Clean gaskets and the surface that they touch. Rub a thin coat of paraffin wax on the
gaskets following cleaning.
The doors will not close completely
• Are food packages blocking the door open? Rearrange containers so that they fit more tightly and take up less space.
• Is the ice bin out of position? Push the ice bin in all the way.
• Are the crisper cover, pans, shelves, bins, or baskets out of position? Put the crisper cover and all pans, shelves, bins,
and baskets back into their correct positions. See "Refrigerator Features."
• Are the gaskets sticking? Clean gaskets and the surface that they touch. Rub a thin coat of paraffin wax on the gaskets following cleaning.
• Does the refrigerator wobble or seem unstable? Level the refrigerator. See "Adjust the Doors."
• Were the doors removed during product installation and not properly replaced? Remove and replace the doors according to "Refrigerator Doors," or call a qualified service
technician.
17
Loading...
+ 39 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use