Whirlpool HOB 433/S, EKM 4462 IN-1, AKM330/WH, AKM 330/BR, AKM330/IX User Manual
...
1gb58913.fm Page 9 Friday, March 5, 2004 12:29 PM
CONTENTS GB
BEFORE USING THE GLASS CERAMIC HOB
INSTALLATION
ELECTRICAL CONNECTION
ENERGY SAVING TIPS
PROTECTING THE ENVIRONMENT
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
COOKTOP ACCESSORIES
CARE AND MAINTENANCE OF THE
GLASS-CERAMIC COOKTOP
PAGE
PAGE
PAGE
PAGE
PAGE
PAGE
PAGE
PAGE
10
10
11
12
12
12
13
13
TROUBLESHOOTING GUIDE
AFTER SALES SERVICE
PAGE
PAGE
13
14
9
1gb58913.fm Page 10 Friday, March 5, 2004 12:29 PM
BEFORE USING THE GLASS CERAMIC HOB
• To make the most of your new appliances read the
users instructions carefully and keep them on
hand for consultation in the future.
INSTALLATION
Cooktop
• The cooktop must be set into a worktop
between 20 mm and 50 mm thick.
• Insert a separator panel at a minimum distance
of 90mm from the bottom of the hob so that it
is inaccessible to the user.
• If the cooktop is to be installed next to a
column unit, leave a distance of at least 100
mm from the edge of the cooktop to the side of
the column unit.
• Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
• If not already present, fit the supplied seal to the
cooktop flange after cleaning the contact area as
shown in the figure.
N.B.: Remove the protective film before installing the
cooktop.
• If the worktop is made of wood, use the supplied
spring clips and screws.
1. Position the 4 clips (D) as shown and at the
specified dimensions.
2. Secure the clips using screws (E).
3. Fit the cooktop into the worktop.
• If the worktop is made of marble, plastic,
ceramics, natural stone, etc., the cooktop must
be secured with brackets (F) code 4819 404 78697
(to be requested from After-Sales Service).
1. Fit the cooktop into the worktop.
2. Position the 4 brackets (F) as shown in the figure,
in accordance with the thickness of the worktop.
3. Fix the 4 screws (G) in holes (H).
10
Loading...