Whirlpool WA PLUS 616 DI BK, ECO 6610 AAA, WAP 6460-2 BK, WA PLUS 612 DI, WAP 6660-2 BK INSTRUCTION FOR USE
40105525GB.fm Page 1 Wednesday, April 7, 2010 6:15 PM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
Care
Labels
K
J
Max.
Load
- Respect the manufacturer’s recommendations on the care label
kg
Type of wash/Notes
C
D
GE
E. Programme selector
H
}
Detergents and additives Special options
Pre-
Main
wash
Softener Start
wash
F. “Start” button
G. “Spin” button
A
B
H. Programme sequence indicator
I. “Reset” button
I
J. “Start delay” button
F
K. Time display
delay
Start-
vorwahl
Clean+
Clean +
Pre-
wash
Vor-
wäsche
Easy
ironing
Leicht
bügeln
Intensive
rinse
Intensiv
spülen
Rinse
hold
Spül-
stopp
Spin
Schleu-
dern
Max
Spin
Speed
rpm
Cotton /
Hygienic +
60 - 95 °C
Cotton
40 °C
SuperEco
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Eco Cotton
60 °C
Rinse & Spin Spülen & Schleudern
Spin Schleudern
Drain Abpumpen
= optional / Yes = dosing required.
❉
:
1)
For improved garment care, spin speed is restricted in these programmes.
60 - 95 °C
Buntwäsche
40 °C
SuperEco
60 °C
Pflegeleicht
30 - 40 - 60 °C
Feinwäsche
30 - 40 °C
Mischwäsche
40 °C
Schnelle Wäsche
30min.
30 °C
Wolle
kalt - 40 °C
Handwäsche
40 °C
Baumwolle Eco
60 °C
—
—
—
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
6.0
of cotton and linen.
Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your
laundry. The bacteria removal efficiency has been tested following a similar methodology
to the NF EN 13697 standard of Nov. 2001.
5.0
Normally to heavily soiled and robust bed linen, table linen and underwear, towels, shirts
etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run
6.0
overnight to additionally profit from the more favourable energy rates. To avoid noise of
spinning at night, set spin speed to “0” and start spin programme in the morning, or define
programme start with “Start Delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
2.5
polyamide (Perlon, Nylon) or blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with
3.0
cotton.
Only woollens, labelled with the Woolmark and identified as machine washable
This programme (40°C) is tested and approved by The Woolmark Company for
1.0
machine washable wool.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for
1.0
handwashable wool.
Heavily soiled and robust laundry washable at 60 °C such as bed linen, table linen, towels
etc. made of cotton and linen.
6.0
The extended programme duration enables economic energy and water consumption while
maintaining good washing results.
Same as the last rinse and the final spin in the “Cotton” programme.
6.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
6.0
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
6.0
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed accor
instructions on the garment label and those issued in this programme
.
chart. M0619
Ye s
❉
Ye s
—
Ye s
❉
Ye s
❉
Ye s
—
Ye s
—
Ye s
—
Ye s
—
Ye s
—
——
❉❉❉❉❉❉❉❉
❉❉
❉❉❉❉❉❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
—— —
—— —
ding to the
———
—
❉
——
————
————
————
———
———
—————
❉
———————
❉
❉❉❉
——
❉❉
❉❉❉❉
❉❉
❉❉
❉❉
❉❉❉
❉❉❉
5019 401 05525
max.
max.
1)
1000
1)
1000
max.
max.
1)
1000
1)
400
max.
max.
max.
❉
Black process 45.0° 150.0 LPI
40105525GB.fm Page 2 Wednesday, April 7, 2010 6:15 PM
CONSUMPTION DATA
Programme
Cotton / Hygienic + 95 6.0 59
Cotton 60 6.0 49 1.02 2:20
Cotton 40 5.0 56 0.70 2:00
SuperEco 60 6.0 51 0.72 4:00
Synthetics 60 2.5 50
Synthetics 40 2.5 46 0.50 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Eco Cotton
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60
with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
***
Te m p e r a t u r e
(°C)
60 6.0 49 0.78 4:00
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the
programme and temperature.
2. The
programme (in hours and minutes), and the indication
lamp next to the
3. The
lights up.
programme selector
time display
indication lamp
shows the duration of the chosen
“Start”
of the predefined spin speed
to the desired
button blinks.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Clean+” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.
• Selectable for programmes “Cotton” and “Synthetics”; choose
temperature of 30 or 40°C and use with maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together
with your detergent (only use powder detergent with this
option). Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
Load
(kg)
Wat er
(l)
**
**
• Appropriate for use of stain removers and bleaches on
“Prewash” button
• Only for heavily soiled loads (for example sand,
• Do not use liquid detergent for the main wash when
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
• Increases the water quantity and the clothes are spun
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
“Rinse hold” button
• The laundry remains in the last rinse water without
• This option is particularly recommended for the
• It is particularly useful if you want to postpone spinning
• If you select “Rinse hold”, do not leave the items to
Energy
(kWh)
1.90 2:00
0.80 1:35
oxygen basis.
not be used!
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
activating the “Prewash” option.
“Daily load” programmes to make ironing easier.
very gently.
water, washing baby linen and helping people with allergies.
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
programmes “Synthetics”, “Daily load” and “Delicates”.
to a later time, or if you want to drain only.
soak for too long.
The programme stops to “Rinse hold” at the
Note:
time the “Rinse hold” light in the programme sequence
indication is on. The indication lamp next to the
button blinks.
“Start”
Approx. Programme Duration
(hours : minutes)
456. Consumption data in the home may vary
Chlorine or perborate bleaches must
Terminate the “Rinse hold” option:
• Press the
*
terminate automatically with the final spin cycle for the
present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
button; the programme will
“Start”
button.
“Start”
START DELAY
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time
by 1 to 23 hours;
• Press the
The indication of the “Start delay” button blinks and
the countdown of the delay time begins; the “Start
delay” indication lamp and the dot on the display will
keep blinking until the programme starts.
• The time delay indication disappears when the programme
starts and it is replaced by the remaining programme time.
• Once having pressed the
of hours preselected can be reduced by pressing again
the “Start delay” button.
To cancel the “Start delay”
...before you press the “Start” button:
• Turn the programme selector to another position or
press the
...after having pressed the “Start” button:
• Press
“Start”
display. Press
programme immediately.
button.
“Start”
button, the number
“Start”
button.
“Reset”
- the delay time disappears from the
again to start the selected
“Start”
PROGRAMME START
Open the tap and press the
lamp of the
sequence indicator shows the current programme phase,
running from left to right through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is
the case, an animation appears on the time display.
button lights up. The programme
“Start”
button. The indication
“Start”
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Reset a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
The light blinks.
2. Select the new programme and, if you want, another
spin speed and any options.
3. Press the
continues at the same position where the previous
programme was interrupted. Do not add detergent
for this programme.
button to pause the programme.
“Start”
button again. The new programme
“Start”
RESET A RUNNING PROGRAMME BEFORE
THE END
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds;
“Reset”
“rES” appears on the display. Any existing water is
drained out before the door can be opened. It may
last a while until you can open the door.
5019 401 05525
Black process 45.0° 150.0 LPI
Loading...