Whirlpool ECO 6400 INSTRUCTION FOR USE

40105388GB.fm Page 1 Tuesday, May 29, 2007 4:13 PM

GB ECO 6400 PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Care

Labels

White Cotton

60 - 95 °C

Coloured

Cotton

40 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Programme

Koch-/

Buntwäsche

60 - 95 °C

Buntwäsche

40 °C

Pflegeleicht

30 - 40 - 60 °C

Feinwäsche

30 - 40 °C

Max

Load

- For temperature selection, respect the manufacturer’s recommendations on the care label

6.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be additionally selected.

5.0

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

2.5

With heavily soiled laundry the additional “Prewash” option can be additionally selected.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

With heavily soiled laundry the additional “Prewash” option can be additionally selected.

Type of wa s h / N o t e s

C D

E. Programme selector

F. “Start” button

G. Spin speed selector

H. Programme sequence indicator

I. “Reset” button

Detergents and additives Special options

Pre-

Main

wash

Yes

❉

Yes

❉

Yes

❉

Softener Start

❉❉❉❉❉❉❉

❉❉

J. “Start delay” button

Eco +

delay

Start-

vorwahl

Öko +

—

Pre-

wash

Vor-

wäsche

❉

Intensive

rinse

Intensiv

Spülen

—

Rinse

Variable

hold

Spül-

stopp

spin

Schleu-

dern

❉❉

Max Spin

Speed

rpm

1400

1000

Daily load

40 °C

Quick wash

30 °C

Wool

cold - 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin Spülen & Schleudern

Spin Schleudern

Short Spin Schonschleudern

Drain Abpumpen

❉

: = optional / Yes = dosing required.

For improved garment care, spin speed is restricted to 1000 rpm in this programme.

For improved garment care, spin speed is restricted to 400 rpm in this programme.

Black process 45.0° 100.0 LPI

Mischwäsche

40 °C

Schnelle Wäsche

30 °C

Wolle

Kalt - 40 °C

Handwäsche

40 °C

Dessous

30 °C

Slightly to normally soiled textiles made of cotton and/or synthetics.

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with

3.0

cotton. Only woollens, labelled with the Wo olmark and identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark Company for machine

1.0

washable wool.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Wool mark Company for handwashable wool.

— — — ——

1.0

If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.

This programme is particularly suitable to treat delicate lingerie (use of a laundry net

1.0

strongly recommended).

Same as the last rinse and the final spin in the “Cotton” programme.

6.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

6.0

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

1.0

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

Yes

—

Yes

—

Yes

—

Yes

—

Yes

— ——

❉❉

❉❉ ❉❉

——— ———

——

—— —

—— — ——

—— — —

❉

—— — —

❉

——— — —— — —— —

The wool and handwash cycles of this machine have been tested and approved by The Wool mark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.

M0619

❉❉❉

❉❉

❉❉❉

1400

1000

400

1400 1400

❉ ❉

1000

5019 401 05388

40105388GB.fm Page 2 Tuesday, May 29, 2007 4:13 PM

CONSUMPTION DATA

Programme

White Cotton

Cotton

Cotton with “Eco +”

Coloured Cotton

Synthetics Synthetics

Delicates

Daily load

Quick wash

Wool

Handwash

Temperature

(°C)

95 6.0 59 60 6.0 49 1.14 2:10 60 6.0 49 1.02 2:20 40 5.0 56 0.70 2:00 60 2.5 50 40 2.5 46 0.50 1:20 30 1.5 60 0.50 0:45 40 3.0 41 0.50 1:00 30 3.0 41 0.40 0:30 40 1.0 60 0.50 0:45 40 1.0 45 0.50 0:40

Load

(kg)

Water

(l)

Energy

Approx. Programme

Duration

(kWh)

1.90 2:00

0.80 1:35

(hours : minutes)

Lingerie 30 1.0 45 0.40 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

To reduce the water temperature, some cold wate r is added at the end of th e main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

programme selector

to the desired

programme and temperature.

2. The indication lamp of the predefined lights up.

speed

spin

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco +” button

• With a modified temperature profile and a

slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by approximately 15 min.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

The programme stops to “Rinse hold” at

Note:

the time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the

“Start”

button flashes.

Terminate the “Rinse hold” option:

• Press the

“Start”

button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the

“Start”

button.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 12 hours;

• Press the

“Start”

button. The indication light next to the “Start Delay” button lights up and the countdown of the delay time begins.

•The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the

“Start”

button, the number of hours preselected can be reduced by pressing again the “Start Delay” button.

To cancel the “Start Delay” ..before you press the “Start” button:

• Turn the programme selector to another position or press the

“Reset”

button.

..after having pressed the “Start” button:

• Press the “Reset” button for at least 3 seconds - the start delay time disappears from the time display .

PROGR AMME START

Open the tap and press the indication lamp next to the

“Start”

button. The

button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

“Start”

button to pause the

programme. The light flashes.

2. Select the new programme and, if you want, another spin speed and any options.

3. Press the

“Start”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Reset”

button cancels a programme before

the end.

• Press the

“Reset”

button for at least 3 seconds. Any existing water is drained out before the door can be opened.

5019 401 05388

Black process 45.0° 100.0 LPI