Whirlpool Duet Steam WFW9550WW01, Duet Steam WFW9550WR00, Duet Steam WFW9550WL01, Duet Steam WFW9550WL10, Duet Steam WFW9550WR01 Use & Care Manual

FRONT.LOADING

AUTOMATICWASHER

For questions about features, operation/performance,

parts, accessories, or service call: 1-800-253-1301

In Canada, call: 1-800-807-6777

www.whirlpool.com or www.whirlpool.ca

or visit our website at

LAVEUSE

AUTOMATIQUEA

CHARGEMENTFRONTAL

W10251899C

Certified to Sanitize
Homologu6 pour assainir

Au Canada, pour assistance, installation ou service, composez le :

ou visitez notre site Internet & www.whirlpool.ea

Table of Contents/Table des matieres .................. 2

Designed to use only HE High Efficiency Detergent
Con(_ue pour I'utilisation d'un d6tergent haute efficacit6

seulement

1-800-807-6777

TABLEOFCONTENTS

TABLEDESMATIERES

WASHER SAFETY ......................................................................... 3

INSTALLATION REQUIREMENTS ................................................ 4

Tools and Parts ............................................................................ 4

Options ......................................................................................... 4

Location Requirements ................................................................ 5

Drain System ................................................................................ 6

Electrical Requirements ............................................................... 7

INSTALLATION INSTRUCTIONS .................................................. 7

Remove Transport System .......................................................... 7

Connect the Inlet Hoses ............................................................... 8

Connect the Drain Hose ............................................................... 8

Secure the Drain Hose ................................................................. 9

Level the Washer .......................................................................... 9

Complete Installation ................................................................... 9

FEATURES AND BENEFITS ........................................................ 10

WASH ER USE ............................................................................... 11

Starting Your Washer ................................................................. 11

Using the Proper Detergent ....................................................... 11

Using the Dispenser ................................................................... 12

Pausing or Restarting ................................................................. 13

Changing Cycles, Options, and Modifiers ................................. 13

Status Lights .............................................................................. 13

Cycles ......................................................................................... 14

Normal Washer Sounds ............................................................. 15

Options ....................................................................................... 16

Modifiers ..................................................................................... 16

Laundry Guide ............................................................................ 17

LAUNDRY TIPS ............................................................................ 18

Loading ....................................................................................... 18

WASHER CARE ............................................................................ 19

Cleaning Your Washer ............................................................... 19

Water Inlet Hoses ....................................................................... 19

Vacation, Storage, and Moving Care......................................... 20

TROUBLESHOOTING .................................................................. 21

ASSISTANCE OR SERVICE ......................................................... 24

In the U.S.A................................................................................ 24

In Canada ................................................................................... 24

Accessories ................................................................................ 24

WAR RANTY .................................................................................. 25

SleCURITle DE LA LAVEUSE ........................................................ 26

EXIGENCES D'INSTALLATION ................................................... 27

Outillage et pieces ...................................................................... 27

Options ....................................................................................... 27

Exigences d'emplacement ......................................................... 28

Systeme de vidange ................................................................... 29

Specifications electriques .......................................................... 30

INSTRUCTIONS D'INSTALLATION ............................................. 31

I_limination des accessoires de transport .................................. 31

Raccordement des tuyaux d'alimentation ................................. 31

Raccordement du tuyau de vidange .......................................... 32

Immobilisation du tuyau de vidange .......................................... 32

Reglage de I'aplomb de la laveuse............................................ 33

Achever I'installation.................................................................. 33

CARACTg:RISTIQUES ET AVANTAGES ..................................... 34

UTILISATION DE LA LAVEUSE ................................................... 35

Mise en marche de la laveuse.................................................... 35

Utilisation du detergent approprie ............................................. 35

Utilisation du distributeur ........................................................... 36

Pause ou remise en marche ....................................................... 37

Changement des programmes, options et modificateurs .........38

T6moins lumineux ...................................................................... 38

Programmes ............................................................................... 39

Sons normaux emis par la laveuse ............................................ 41

Options ....................................................................................... 41

Modificateurs .............................................................................. 42

Guide de lessivage ..................................................................... 43

CONSEILS DE LESSIVAGE .......................................................... 44

Chargement ................................................................................ 44

ENTRETIEN DE LA LAVEUSE ..................................................... 44

Nettoyage de la laveuse ............................................................. 44

Tuyaux d'arrivee d'eau ............................................................... 45

Precautions h prendre avant lesvacances,

un entreposage ou un dem6nagement ...................................... 46

DlePANNAGE ................................................................................. 46

ASSISTANCE OU SERVICE ......................................................... 50

Aux #tats-Unis ............................................................................ 50

Au Canada .................................................................................. 50

Accessoires ................................................................................ 50

GARANTIE ..................................................................................... 51

2

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:

You can be killed or seriously injured if you don't immediately
follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injuryto persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing

machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during

this time.

State of California Proposition 65 Warnings:
WARNING: This product contains a chemical known to the State of California to cause cancer.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

SAVE THESE INSTRUCTIONS

Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and
have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 19/16"[39.5 mm])

• Flashlight (optional)
Tools needed for connecting the drain hose

• Locking pliers (that open to 19/16"[39.5 mm])
Tools needed for installation

• Open end wrenches 17 mm and 13 mm

• Level

• Wood block

• Ruler or measuring tape

Parts supplied:

D

A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)

D. Transport bolt hole plug (4)

Alternate Parts
Your installationmay require additional parts. If you are interested in

purchasing one of the items listed here, call the toll-free number on
the cover or in the "Assistance or Service" section.

If You Have You Will Need to Buy

Laundry tub or Sump pump system (ifnot already
standpipe taller than available)
96" (2.4 m)

Overhead sewer

Standard 20 gal. (76 L),30" (762 mm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)

Floor drain

Siphon break, Part Number 285834;
additional drain hose Part Number

8318155; and connector kit, Part Number
285835

Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part

Number 285863

Water faucets 2 longer water fill hoses: 6 ff (1.8 m) Part
beyond reach of fill Number 76314, 10 ft (3.0 m) Part

hoses Number 350008

E.Beaded strap
E Drain hose

G. Hose clamp

Pedestal

You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (254 mm) or a

15.5" (394 mm) pedestal. These pedestals will add to the total height
of the washer for a total height of approximately 48" (1219 mm) or

53.5" (1359 mm), respectively.

\

A

A. 10" (254 mm) pedestal
B. 15.5" (394 mm) pedestal

Toorder, call the dealer from whom you purchased your washer or
refer to the "Assistance or Service" section.

Pedestal Color Part Number
Height

10" (254 mm) White WHP1000SQ
10" (254 mm) Black WHP1000SB
10" (254 ram) Diamond Dust (Silver) WHP1000SU

15.5" (394 ram) White XHP1550VW

15.5" (394 ram) Black XHP1550VB

15.5" (394 ram) Diamond Dust (Silver) XHP1550VU

15.5" (394 ram) New Aspen (Light Green) XHP1550VA

15.5" (394 ram) Tuscan Chestnut XHP1550VC

15.5" (394 ram) Ocean Blue XHP1550VE

15.5" (394 ram) Cranberry Red XHP1550WR

15.5" (394 ram) Lunar Silver XHP1550WL

Stack Kit

Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.

Toorder, call the dealer from whom you purchased your dryer
or refer to the "Assistance or Service" section. Ask for Part

Number 8541503.

/

/Y

B

4

Selecting the proper location for your washer improves
performance and minimizes noise and possible washer "walk."

Your washer can be installed under a custom counter, or in a
basement, laundry room, closet, or recessed area. See "Drain

System."
Companion appliance location requirements should also

be considered. Proper installation is your responsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the
washer.

• A grounded electrical outlet located within 6 ft (1.8 m) of
where the power cord is attached to the back of the washer.
See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m)
of the hot and cold water fill valves, and water pressure
of 20-100 psi (137.9-689.6 kPa).

• If you live ina hard water area, use of a water softener is
recommended to control the buildup of scale in the steamer
and other areas of the washer. Over time, the buildup of lime
scale may clog the steamer, which will reduce steamer
efficiency and performance. Excessive buildup of scale may
lead to the need for steamer replacement or repair.

• A level floor with a maximum slope of 1" (25 mm) under entire
washer. Installing the washer on soft floor surfaces, such as
carpets or surfaces with foam backing, is not recommended.

• A sturdy and solid floor to support the washer with atotal weight
(water and load) of 400 Ibs (180 kg).

Do not operate your washer intemperatures below 32°F (0°C).
Some water can remain inthe washer and can cause damage in low
temperatures.

Installation clearances

• The location must be large enough to allow the washer door
to be fully opened.

• Additional spacing should be considered for ease of installation
and servicing.

• Additional clearances might be required for wall, door, and
floor moldings.

• Additional spacing of 1" (25 mm) on all sides of the washer
is recommended to reduce noise transfer.

• Companion appliance spacing should also be considered.

Washer Dimensions

Recommended installation spacing for custom
undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

'HI M''P '1

39"rain.

(25ram) (666ram) (25ram)

Recommended installation spacing for recessed
or closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

.__ 3"

- f

-- (864

34"rain.

1"--_11_'--32"-_q4" _--

(25ram} (813ram}(102mm}

A

A.Side view -closet or confinedarea
B.Closet door with vents

*Min. top and bottom air openings for closet door.
Recessed or closet installation - Washer on pedestal

_%-._

, v

48in.2L_

(310cm2)

24in,2

(155cm2}

-- 18" mln,

(76ram)

B

._.

(457mm)

51"

_(1295

(25ram} (686ram} (25ram} (813ram}(102ram}

A B

A.Recessedarea
B. Sideview- closet or confinedarea

Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer

Thedimensionsshown arefor therecommendedspacing.

3I*

(76ram)

0

3 II_

"-__ (78_m)

The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need.

See "Tools and Parts."

Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of

2" (50 mm). The minimum carry-away capacity can be no less than
17 gal. (64 L) per minute.

The top of the standpipe must be at least 30" (762 mm) high and

no higher than 96" (2.4 m) from the bottom of the washer.

(25ram)

*Required spacing

6"*(152ram}

[

\ _.__J/

78"

(193imm)

m

51/2" _ _ 1 "*"_

{140ram) {25mm)

*Required spacing

**For venting out the side, 1" (25 mm) spacing is allowed.

Recommended installation spacing
for cabinet installation

• The dimensions shown are for the recommended spacing.

• For cabinet installation with a door, the minimum ventilation
openings in the top are required.

"_/7" (178ram)

_ 7"(178ram)

m

(888ram} (25ram}

30"rain.

(702mm}

A B

Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 30" (762 mm) above the floor.

Floor drain system (view D)
The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."
The siphon break must be a minimum of 28" (711 mm) from the

bottom of the washer. Additional hoses might be needed.

C D

I

(102ram}

6

(813ram} (25ram} (686ram} (25ram)

_--l"-:,,qI_---27"-----_I_-1"

I|

• Do not ground to a gas pipe.

• Check with a qualified electrician ifyou are not sure the
washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit.

GROUNDING iNSTRUCTiONS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.

Do not use an adapter.
Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

• A 120 volt, 60 Hz.,AC only, 15- or 20-amp, fused electrical
supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.

• This washer is equipped with a power supply cord having
a 3 prong grounding plug.

• To minimize possible shock hazard, the cord must be
plugged into a mating, grounded 3 prong outlet, grounded
in accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.

• If codes permit and a separate ground wire is used, it is
recommended that a qualified electrician determine that the
ground path is adequate.

For a grounded, cord=connected washer:
This washer must be grounded. In the event of a malfunction
or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electdc
current. This washer is equipped with a cord having an
equipment=grounding conductor and a grounding plug. The
plug must be plugged intoan appropriate outlet that is
properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance -if itwill
not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:
This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on
the appliance.

INSTALLATIONINSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer
is within approximately 3 ft (900 ram) of its final location.

There are 4 bolts inthe rear panel of the washer that support the
suspension system during transportation. These bolts also retain

the power cord inside the washer until the bolts are removed.

1. Using a 13 mm wrench, loosen each of the bolts.

2.

Once the bolt is loose, move it to the center of the hole and
completely pull out the bolt, including the plastic spacer
covering the bolt.

3. Once all 4 bolts are removed, discard bolt and spacers. Then pull
the power cord through the opening of the rear panel and close
the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your
local service center. To avoid suspension and structural damage
to your washer, it must be properly set up for relocation by a

certified technician.

8. Using pliers, tighten the couplings with an additional
two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

9. Turn on the water faucets and check for leaks.
NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement
dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts,
wear, or leaks are found.

_;_, _1_ _, ,_;,.......

1.

Insert new flat washers (supplied) into each end of the inlet hoses.
Firmly seat the washers inthe couplings.

A B

A. Coupling
B. Washer

2. Make sure the washer drum is empty.

3. Attach the hose with the red color indicator to the Hot (left) inlet
valve. Attaching the red coupling first makes it easier to tighten

connection with pliers. Screw on coupling by hand until it is
seated on the washer.

4. Attach the hose with the blue color indicator to the Cold (right)
water inlet valve. Screw on coupling by hand until it is seated

on the washer.

Remove drain hose from washer drum

1. Use locking pliers, squeeze hose clamp tabs together and insert
over the end of drain hose.

2. Slide drain hose onto washer connection.

3. Once drain hose is in place, release pliers.

J

H.Hot waterinlet
C.Coldwater inlet

5. Using pliers, check the tightness of the hose couplings already
attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

6. Attach hot water hose to the hot water faucet. Screw on coupling
by hand until itis seated on the washer.

7. Attach cold water hose to the cold water faucet. Screw on
coupling by hand until it isseated on the washer.

8

4. Washer drain system can be installed using afloor drain, wall
standpipe, floor standpipe, or laundry tub.

Laundry tub drain or standpipe drain
Connect the drain hose form to the corrugated drain hose.

A B

A.Snap eitherend of thedrainhoseform to thedrain hose

at thepoint where thecorrugationbegins.

B.Bend drainhoseover drainhose form and snap intoplace.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess drain
hose into standpipe. Hose should be secure, but loose enough
to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and
Parts."

If the washer is against a wall, move the washer out slightly
before tipping back. If the washer is not level, first prop the
front with a wood block and adjust the feet as necessary;
then prop the back and adjust feet as necessary. Repeat this
step until washer islevel.

2. Make sure all four feet are stable and resting on the floor.
Then check that the washer is perfectly level (use a level).

3. After the washer is level, use a 17 mm open-end wrench to
turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are
not tight against the washer cabinet, the washer may vibrate.

4. The washer should not move front to back, side to side,
or diagonally when pushed on its top edges.

5. Slide the washer to its final location.

6. Confirm the levelness of the washer.

1. Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See "Electrical Requirements."

2. Check that all parts are now installed. Ifthere is an extra part,
go back through the steps to see which step was skipped.

3. Check that you have all of your tools.

4. Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

1=

Drape the power cord over the washer top.

2.

Secure the drain hose to the laundry tub leg or standpipe with
the beaded strap provided. (See illustrations A and B.)

B C

If the washer faucets and the drain standpipe are recessed
(see illustration C), put the hooked end of the drain hose in
the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Properly leveling your washer avoids excessive noise and vibration.

1. Check the levelness of the washer by placing a level on the
top edge of the washer, first side to side, then front to back.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

7=

Plug into a grounded 3 prong outlet.

8.

Read "Washer Use."

9.

Totest and clean your washer, make sure there areno clothes in
the washer and add one AFFRESH <etablet to the washer drum.

Select Power, the Clean Washer cycle and then select START.
This cycle will take approximately 65 minutes to complete. Allow
the washer to complete the entire cycle without interruption.

FEATURESANDBENEFITS

Electronic Controls

Flexible electronic controls are easy to use whether you are a
beginner or an expert.

Smart Dispensers

The Smart Dispensers make your washer truly automatic. This
washer provides a three-compartment dispenser which includes
separate compartments for main wash detergent, fabric softener,
and bleach. The dispenser has large pour zones. The dispenser is
self-cleaning, and can be easily removed. Laundry products are
diluted with fresh water and added to the load at the proper time
in the wash cycle.

Deep Clean with Steam

This washer has a built-in steaming unit which is combined with
the DEEP CLEAN option to provide multiple temperatures to help
remove a variety of stains from garments.

Clean Washer With AFFRESH TM Cycle with Steam

This cycle uses steam to raise the temperature of the washer and
makes the washer self-cleaning, flushing the machine's interior

free of dirt and other residue. The use of AFFRESH_washer cleaner
or liquid chlorine bleach with this cycle will remove and help avoid

odor-causing residue.

Auto Water Level

This washer automatically adjusts water level for optimal cleaning
and rinsing performance. Two sensors determine load size, load
composition, and suds level, then the sensors adjust the water
level to the proper setting. This eliminates guesswork. The water
level is just right for every wash load size.

Heating Element

This washer has a heating element that automatically heats the
water to the optimal temperature on select cycles. This enables
stepped cleaning, a process in which warm water is brought in
and mixed with detergent first, then the water is heated. Stepped
cleaning starts the wash cycle with warm water to remove stains
(such as blood and grass).

6th SENSE ° Intuitive Controls
Intuitive intelligence "knows every load" determining load sizes,

water levels, and how much cleaning time is needed.

6

sense '°

Add A Garment

When this option is available at the beginning of the cycle, the
Add A Garment Status Light will glow for the first 4-8 minutes.
This washer allows a 4-8 minute period in which other garments
may be added to a load.

Direct Injection Wash System

This washer channels 100% of the water through the dispensers
to assure thorough rinse-out and mixture of allthe laundry
products before they touch any garments. The water is then
sprayed from the top front onto the center of the load, providing
even distribution and optimum cleaning performance. It is normal
for small amounts of water to remain in the dispensers when the
wash cycle is complete.

Larger Load Size

Because there is no agitator, you can wash larger, bulkier items such
as a king-sized bedspread. You are also able to wash more clothes
at one time, which means fewer loads.

Stainless Steel Drum

The stainless steel drum eliminates corrosion and enables higher
spin speeds for more water extraction, helping to reduce drying
time compared to traditional top-load washers.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with
fewer, larger loads. Italso lowers your water and energy bills by
helping conserve resources.

Spin Speeds

This washer automatically selects the spin speed based on the
cycle selected. This factory setting can be changed, however.
This washer offers up to five different spin speed choices, up to
1300 rpm.

Efficient Detergent System with Anti-Escape Valve
This washer has a specially designed valve that closes during

the wash portion of the cycle so that 100% of the water and
detergent mixture is used on the load. The Efficient Detergent
System ensures that no water or detergent is wasted.

6-Point Suspension System

Shock absorbers, 2 springs, and electronic controls are specially
designed to help redistribute the load automatically and minimize
movement of the wash drum during the spin cycle. The 6-Point
Suspension System reduces the amount of force transmitted to
the floor by the washer, resulting in reduced noise and vibration.

10

WASHERUSE

NOTE: The panel shown above may be different from that of your model.

Before washing clothes for the first time, if not completed during
the final installation step, choose the QUICK WASH cycle and run
it without clothes. Use only HE detergent. Use 1/,..

the manufacturer's recommended amount for a medium-size load.
This initial cycle serves to ensure the interior is clean before

washing clothes.

DelayWash

First Wash Cycle Without Laundry

For AllWash Cycles

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on

it (including cooking oils).
Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injuryto

persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.

The following is a guide to using your washer. Please refer to
specific sections of this manual for more detailed information.

Do not store laundry products on the top surface of this washer.
Vibration is normal during operation.

Use only High Efficiency detergents. The package for this type
of detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with
a regular non-HE detergent. Using regular detergent will likely
result in washer errors, longer cycle times, and reduced rinsing
performance. It may also result incomponent failures and noticeable
mold or mildew. HE detergents are made to produce the right
amount of suds for the best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use.
Remember, concentrated detergents such as 2x or higher will use
less detergent based on load size.

Use only High Efficiency (HE) detergent.

1.

Open the washer door by pulling on the handle. Sort laundry
according to color and type of fabric. Place a load of sorted
clothes in the washer. Do not overload washer. Overloading
can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed.
Washer door should close easily.

Mix large and small items and avoid washing single items.
Load evenly.

Wash small items, such as infant socks, in mesh garment

bags. It is recommended that more than one garment bag
be used, and that each garment bag be filled with equal

amounts of material.

• When unloading garments, occasionally check under the
gray colored seal at the front of the tub for small items.

2=

Close the washer door by pushing it firmly until the lock clicks.
The washer door will remain locked during the wash cycle.

NOTES:

After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin.

The door can be opened only if PAUSE/CANCEL is
selected while the Add A Garment light is glowing or if
the cycle has been canceled.

See "To cancel a cycle" in "Changing Cycles, Options,
and Modifiers" section.

3=

Open the dispenser drawer and add laundry products to the
detergent, bleach, or fabric softener compartments. Close drawer
slowly to avoid spills. See "Using the Dispenser."

4=

Turnon thewasher by selecting POWER. Select one of the cycles
by turning the cycle selector. The indicator light for the selected
cycle will glow green. When you areselecting a wash cycle, the
preset options and modifiers (suchas Water Temp, Spin Speed,
Soil Level, and Rinse)for the selected cycle will glow green.
Selectable options will glow amber. If an option or modifier is
unavailable with aselected cycle, the light will not illuminate.
The display shows the estimated time remaining. The preset
settings provide the recommended fabric carefor the selected
cycle. See "Cycles."

11

5. Select the desired Options. Not alloptions areavailable with
all cycles. See "Options."

6. Select the desired modifiers such as Water Temp, Spin Speed,
Soil Level, and Rinse. Not all modifiers are available with all cycles
and options. See "Modifiers."

7. If desired, select the CYCLE SIGNAL. The signal is helpful
when you are washing items that should be removed from the
washer as soon as itstops. Select Loud, Soft, or Off.

8. If desired, select the BU-I-I-ONSOUND. This feature makes a
sound each time a button is pressed. Select Loud, Soft, or Off.

9. Select and hold STARTfor approximately 1 second.

• If you do not select STARTwithin 5 minutes of choosing

a cycle, the washer automatically shuts off.
When the wash cycle is complete, the DONE status light

glows, the door unlocks, and the wash load can be
removed from the washer. The washer powers down
automatically 60 minutes after the cycle is complete
and the DONE light goes off. To power down the washer
manually after the wash cycle is complete, select PAUSE/

CANCEL once.

10. Touse the same cycle again, press POWER first, then select
START.

11. To begin the wash cycle later
Select DELAYWASH until the desired delay time (in hours)

shows in the Estimated Time Remaining display. Select START.
The countdown to the wash cycle will show in the display

window.
IMPORTANT: When delaying a cycle, use only powdered

detergents inthe main wash compartment since liquid
detergents may seep out of the compartment during Delay
Wash, before the wash cycle begins.

Tofill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry product to the proper compartment.

3. Push in the dispenser drawer slowly and completely (to avoid
a spill).

Dispenser

A. Detergent type selector
B. Main Wash detergent compartment
C. Dispenser release lever
D. Chlorine bleach compartment
E. Fabric softener compartment

Your new washer has a dispenser drawer with three separate
compartments for your laundry products--one is for detergent,
one is for liquid chlorine bleach, and one is for liquid fabric

softener. Laundry products are diluted and dispensed
automatically at the proper time during the wash cycle,
making it unnecessary for you to return to the washer during

the cycle to add them.
It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.
Do not put laundry products directly into the wash tub. Always

use the proper dispensers when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of
detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result
in washer errors, longer cycle times, and reduced rinsing
performance. It may also result in component failures and
noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the
manufacturer's instructions to determine the amount of detergent
to use. Remember, concentrated detergents such as 2x or higher
will use less detergent based on load size.

Main Wash detergent compartment

(Letter B in Dispenser Illustration)
Add liquid or powdered HE detergent to this compartment for

your main wash cycle. The detergent type selector (A) must
always be in the correct position for the detergent type used. Slide

the detergent type selector to the correct position.
IMPORTANT: If you are using the Delay Wash option, powdered

detergent must be used in the Main Wash compartment, since
liquid detergents may seep out of the Main Wash compartment

before the main wash begins.

• Use the detergent manufacturer's recommended amount for
load size.

• Liquid or powdered color-safe bleach may be added to the Main
Wash compartment along with the same type of detergent,
liquid or powdered.

• Liquid detergent:

Use only HE High Efficiency detergenL

12

Selector in position for fiquid detergent

A. Detergent type selector

• Powdered detergent:

Selectorin position for powdered detergent

A.Detergent type selector

Chlorine bleach compartment
(Letter D in Dispenser Illustration)

Add no more than 2/3cup (160 mL) liquid chlorine bleach to this
compartment. The bleach will be automatically diluted and
dispensed at the optimum time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.

• Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess.

• Do not fill beyond the"MAX" level.
NOTE: Overfilling could cause garment damage.

At the end of the cycle, a small amount of water may be left in
the dispenser. This is normal.

5. Press START(for approximately 1 second) to restart the washer
at the beginning of the new cycle.

To cancel a cycle

1. Press PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can
be removed.

NOTE: If the water levelor the temperature istoo high, the washer
will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has
started

1. Press PAUSE/CANCEL once.

2. Select the desired Options or Modifiers such as Water Temp,
Spin Speed, and Soil Level.Available selections will glow amber.

3. Press START(for approximately 1 second) to continue the cycle.

To drain the washer manually

1. Press PAUSE/CANCEL twice.

2. Press POWER.

3. Select DRAIN/SPIN.

4. Press START(for approximately 1 second) to begin the drain.

5. When the spin is complete, the door unlocks. Items can be
removed from the washer.

Fabric softener compartment
(Letter E in Dispenser Illustration)
Pour measured liquid fabric softener into the fabric softener

dispenser, if desired.
IMPORTANT: Dilute all fabric softener with water for atotal of
1/4cup (60 mL).

• Do not overfill. The dispenser holds 1/4cup (60 mL).

• Do not spill or drip any fabric softener onto the clothes.
NOTES:

• Use only liquid fabric softener in this dispenser.
Do not use fabric softener dispensing balls in this washer.

Dispensing balls will not operate correctly with this washer.

1. Topause the washer at any time, press PAUSE/CANCEL

2. Tocontinue the cycle, press START (for approximately 1 second).

Not all Options and Modifiers are available with all cycles.
Available modifiers will glow amber. If an option or modifier is
unavailable with a selected cycle, the light will not illuminate.
Cycles, Options, and Modifiers can be changed anytime before

START is selected.

To cancel a cycle and select a new cycle

1. Press PAUSE/CANCEL twice.

2. Press POWER.

3. Select desired cycle.

4. Select the desired Options or modifiers such as Water Temp,
Spin Speed, and Soil Level.

These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.

EstimatedTimeRemaining

Add A Garment

This washer allows a 4-8 minute period in which other garments
may be added to the load. You can add items to the washer if the
Add A Garment status light is glowing.

Toadd items when Add A Garment light is glowing

1. Select PAUSE/CANCEL once. The washer door unlocks after
afew seconds, and items can be added.

2. Tocontinue the cycle, close the door and select and hold
START (for approximately 1 second).

Toadd items when the Add A Garment light is not glowing

1. You must cancel the current cycle by pressing PAUSE/CANCEL
twice. This will cancel the wash cycle and options. The washer
door unlocks, and items can be added.

2. Close the door, press POWER, and select the new cycle and
options. Select and hold START(for approximately 1second).

Done

The Done status light stays on for 60 minutes after the cycle is
complete, and then the washer shuts off.

13

Sanitized

This washer has a Sanitize water temperature that is certified
by NSF International, an independent third-party testing and
certification organization. The certification verifies that the
sanitizing cycle reduces 99.9% of bacteria typically found
on clothing, bedding, and towels, and there is no carryover
of bacteria between loads after the cycle is complete.

Certified to Sanitize

If the "Sanitize" wash temperature was selected, when the wash
cycle is complete, the DONE status light will illuminate, the door

unlocks, and the wash load can be removed from the washer.
The washer powers down automatically 60 minutes after the

cycle is complete and the DONE status light turns off. Only cycles
with sanitize wash temperature selected have been designed to
meet the requirements of NSF Protocol P172 for Sanitizing
Efficacy.

Controls Lock/Unlock

The Controls Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or

option changes during a cycle. When Controls Lock is lit, all
buttons are disabled except for Pause/Cancel and Start. You can
lock the controls while the washer is operating.

To lock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds after the

cycle starts, or when the washer is turned off.

®

ControlsLock/Unlock

Holdfol 3Seconds

The status light next to the CONTROLS LOCK/UNLOCK button
will glow.

To unlock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until

the status light turns off.
NOTE: To lock or unlock the controls when the washer is off,

press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

Door Locked

Whenthe status light glows, the door is locked.

Sensing/Revising Estimated Time

The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load.

The washer will automatically sense the progress in the cycle and
adjust the Estimated Time Remaining display. While the washer is
sensing, the estimated time will flash and the Sensing status light
will glow. When the sensing is complete, the flashing stops, the
status light goes off, and the Estimated Time Remaining display
is updated.

The cycle time will be extended if oversudsing occurs orthe load
is unbalanced. The SUD routine removes extra suds and assures

proper rinsing of your garments. See "Troubleshooting." During
the unbalance routine, the time displayed may pause until this
activity is complete, then resume with the remainder of the cycle.

Cycles can be selected by turning the Cycle Control knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels. The modifier indicator lights, on the right-hand
side of the panel, will change as cycles are selected.

NORMAL

HAND ACTIVEWEAR
WASHABLES BULKYITEMS

QUICKWASH HEAVYDUTY

wAsHcYcLes WHITEST

CLEANWASHER SOAK

w,th_resh

WHITES

:[INSE/SPIN

• Each cycle has a preset Soil Level (estimated cycle time),
Water Temperature, and Spin Speed, and may have preset
options. The preset settings provide the recommended fabric
care for the selected cycle.

• The preset settings will glow green to show the preselected
options and modifiers, and can be changed anytime before
START ispressed. Not all options and modifiers are available
with all cycles. Available selections glow amber. (Tochange
settings after the cycle has started, press PAUSE/CANCEL
once, then select the desired settings. Press STARTto continue
the cycle.)

• Powdered detergents may not dissolve well in aslow-speed
cycle. For best results, use liquid detergent inslow-speed
cycles.

Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water Temperature,

and Spin Speed. The preset settings provide the recommended
fabric care for the selected cycle. See chart.

Cycle Soil Level Water Temp Spin Speed

(cycle time)

Whitest Norm al Hot/Cold High
Whites (1:20)

Heavy Duty Normal Hot/Cold High

(1:1O)

Bulky Items Normal Warm/Cold Low

(0:55)

Active Wear Normal Warm/Cold Medium

(0:40)

Normal/ Normal Warm/Cold High
Casual (0:50)

Delicate Normal Warm/Cold Medium

(0:40)

Hand Normal Cold/Cold Low

Washables (0:30)

Quick Wash Light Warm/Cold High
(2-3 items) (0:18)

Clean N/A N/A N/A

WasherWith (1:05)
AFFRESN TM

14

Cycle Soil Level Water Temp Spin Speed

(cycle time)

Soak Normal Warm/Cold No Spin

(0:32)

Rinse/Spin N/A Warm/Cold High

(0:22)

Drain/Spin N/A N/A High

(0:13)

To change the preset cycle settings
Press the selector of each available setting until the desired

setting glows green.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled white
fabrics with the addition of bleach. Hot washing temperatures
assure optimal bleach activity. An additional rinse provides optimal
rinse performance to avoid chlorine residues on your laundry.
This cycle combines fast-speed tumbling, longer wash time,
and high speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and heavily
soiled garments. This cycle combines fast-speed tumbling, longer

wash time, and high speed spin to shorten drying times. If the water
temperature is lower than needed for this cycle, the heater will warm

the water to the optimum temperature.

• Use meshgarment bagsasnecessary.

Quick Wash

Use this cycle to wash small loads of 2-3 lightly soiled garments
that are needed ina hurry. This cycle combines fast-speed tumbling,
a shortened wash time, and high speed spin to shorten
drying time.

Clean Washer With AFFRESH TM cycle

Use the Clean Washer With AFFRESH TM cycle once a month to
keep the inside of your washer fresh and clean. This cycle uses a

higher water level. Use with AFFRESH _ewasher cleaner tablet or
liquid chlorine bleach to thoroughly clean the inside of your washing

machine. This cycle should not be interrupted. See "Cleaning Your
Washer" in the "Washer Care" section.

IMPORTANT: Do not place garments or other items in the washer
during the Clean Washer With AFFRESH TM cycle. Use this cycle with

an empty wash drum.

Soak

Use the Soak cycle to help remove small spots of set-in stains on
fabrics. This cycle provides a soak time with warm or cold water

followed by drain. Extra water, a short tumbling phase for equal
distribution of the laundry, and asoaking time without drum

movement improve the removal of set-in stains. Drain without spin
assures gentle treatment, even for delicate articles.

Rinse/Spin

Bulky Items

Use this cycle to wash large items such as blankets and comforters.
This cycle starts with a soak to thoroughly saturate your large load.
This is followed by medium wash action and low-spin speeds to

maintain load balance.

Active Wear

Use this cycle to wash small loads of exercise wear such as biking
shorts, tank tops, running tights, and other performance clothing.
This cycle combines low-speed tumbling and medium-speed spin
for gentle fabric care.

Normal/Casual

Use this cycle to wash loads of no-iron fabrics, such as sport shirts,
blouses, casual business clothes, permanent press blends,
cottons and linens, and synthetic fabrics. This cycle combines
medium-speed tumbling, high-speed spin, and a load cooling
process to reduce wrinkling.

NOTE: For the best energy performance, usethe Normal/Casual
Cycle.

Delicate

Use this cycle to wash sheer fabrics and lingerie. This cycle
combines low-speed tumbling and medium-speed spin for gentle

fabric care.

Hand Washables

Use this cycle to get a rinse and spin only. This cycle combines fast-
speed tumbling and high speed spin. If desired, you can reduce the
spin speed by selecting the speed you want from the SPIN SPEED

modifier.
A Rinse/Spin cycle is useful for:

• Loads that need rinsing only, like swimsuits.
NOTE: For more delicate loads, when using a Rinse & Spin

cycle to rinse swimwear, change the Speed Spin Modifier
setting to Medium or Low to avoid fabric stress.

• Adding fabric softener to a load.

Drain/Spin

Use this cycle to drain your washer or to drain and spin your wash
load. The spin speed is preset to high. If desired, you can reduce the
spin speed by selecting the speed you want from the SPIN SPEED

modifier.
NOTE: Loads of synthetics, delicate fabrics, hand washables, and

washable woolens should be drained with nospin or low spin speed
to avoid fabric stress.

As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked and unlocked, and during the washing, rinsing, and spinning
process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation.

Use this cycle to clean hand washable and special-care garments.
Similar to the way garments are hand washed in a sink, the wash
action of this cycle combines periods of low-speed tumbling and
soaking. Low-speed spin reduces wrinkling.

15

You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles. Available options will glow amber. Current
selections will glow green. If an option is unavailable with a selected
cycle, the light will not illuminate.

• DeepClean • NightQuiet

Soft

DelayWash

;rE_ Off

• Cycle

TumbleFresh Signal

Button Sound On/Off

Holdfor3Sec

• See the "Laundry Guide" for an overview of possible options for
each Wash Cycle selection.

• You can select more than one option for a cycle. Some options
cannot be added to some cycles. For example, Deep Clean
cannot be added to the Quick Wash cycle.

• If an option is unavailable with a selected cycle, there will be
3 short tones, and the light for that option will not glow when

selected.

NightQuiet TM option

In this option, the washer will sense vibration in the wash cycle and
may adjust the spin speed to lower sound levels generated during
the spin.

Cycle Signal

This signal is helpful when you are removing items from the
washer as soon as it stops. Press CYCLE SIGNAL to select Loud,

Soft, or Off. To activate/deactivate button sound hold cycle signal
button for 3 seconds.

Preset cycle settings of Water Temperature, Spin Speed, Soil
Level, and Rinse can be changed. You can change a modifier after
starting a cycle anytime before the selected modifier begins. Not all
modifiers are available with all cycles and options. Available options
will glow amber. Current selections will glow green. If a modifier is
unavailable with a selected cycle, the light will not illuminate.

NOTE: The panel shown below may be different from that of your
model.

Hot Medium • Heavy _OMax

li sanitize [i High I!

Warm Low Normal Io Extra
Cold NoSpin Light LONormal

Delay Wash

To begin the wash cycle later, select DELAY WASH until the desired
delay time (in hours) shows inthe Estimated Time Remaining

display, and then select START. The countdown to the wash cycle
will show in the display window, and the button indicator will blink
until the cycle begins.

IMPORTANT: When delaying a cycle, use only powdered
detergents inthe high efficiency "HE" detergent compartment

since liquid detergents may seep out of the compartment during
Delay Wash, before the wash cycle begins.

TumbleFresh TM option

Use this option when you are not able to unload your clothes,
soon after the wash cycle ends. This option provides periodic

tumbling for up to 6 hours to help freshen your clothes. During
this time, the "Done" indicator remains activated, the door

remains locked, and the TumbleFresh TM indicator light will flash.
The TumbleFresh TM option will automatically stop and the door
lock will be released after this time expires, or if you press cancel
at anytime to unload your laundry.

Deep Clean with Steam

Use this option for heavily soiled loads that need improved stain
treatment, loads with multiple types of stains, or loads you
suspect as having stains, but are afraid may have been missed
(no sorting or searching for stains). When Deep Clean with Steam
is selected, the water temperature of the selected wash cycle is
automatically set to warm. The water will then be slowly heated to
the temperature selected, along with steam, to aid in stain removal.
This option will provide optimal removal of organic stains such as
blood and grass.

WaterTemp Spin S0il Rinse

All Cold Speed Level

Rinses

• To change the water temperature, select the WATER TEMP
button until the desired setting glows green.

• To change the spin speed, select the SPIN SPEED button
until the desired setting glows green.

• To change cycle time, select SOIL LEVEL button until the
desired setting glows green.

• To change the rinse, select RINSE button until the desired
setting glows green.

Water Temp

Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.

In wash water temperatures colder than 60°F (15.6°C), detergents
do not dissolve well. Soils may be difficult to remove.

• This washer has a Sanitize water temperature that is certified
by NSF International, an independent third-party testing and
certification organization. The certification verifies that the
sanitizing cycle reduces 99.9% of bacteria typically found
on clothing, bedding, and towels, and there is no carryover
of bacteria between loads after the cycle is complete.

16

Certified to Sanitize