Whirlpool DU900PCDZ5, DU900PCDQ5, DU900PCDB5 Owner’s Manual
_liances
A Note to You ........................ 2
Dishwasher Safety ................ 3
Parts and Features ................ 4
Starting Your Dishwasher .... 6
Loading Your Dishwasher .... 8
Using the Dispensers ......... 13
Setting the Controls ............ 16
Selecting a wash cycle ..... 16
Canceling a cycle ............. 16
Selecting cycle options ..... 17
Changing a cycle setting .... 17
Changing an option
setting ............................... 17
Adding an item during
a cycle .............................. 18
Using delay wash .............. 18
The clean signal light ......... 18
Washing Special Items ....... 19
Caring for Your
Dishwasher .......................... 20
Saving Energy ..................... 23
Solving Common
Dishwashing Problems ...... 24
Troubleshooting .................. 27
Requesting Assistance
or Service ............................ 28
Index ..................................... 30
Warranty .............................. 34
3376832
DmSHWASHER MODEL SERES 900
A Note to You
Thank you for buying a WHIRLPOOL* appmianC÷o
Because your life is getting busier and more complicated, WHIRLPOOL dishwashers are
easy to use, save time, and help you manage your home better. To ensure you enjoy years
of trouble-free operation, we developed this Use and Care Guide. It contains valuable
information about how to operate and maintain your appliance properly and safely. Please
read it carefully.
Also, please complete and mail the Ownership Registration Card provided with your
appliance. This card helps us notify you about any new information on your appliance.
P_eas÷ tecerd Veur medea's infetmationo
Whenever you call to request service for
your appliance, you need to know your
complete model number and serial number.
You can find this information on the model
and serial number label (see diagram on
the "Parts and Features" section for location
of label).
Please also record the purchase date of
your appliance and your dealer's name,
address, and telephone number.
Keep this book and the sales slip together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Address
He_p us he_p Vou
Please:
Have yourdishwasherinstalledby a
qualifiedinstaller.
Installwhere dishwasherisprotectedfrom
the elements.
Install and level dishwasher on a floor that
will hold the weight, and in an area suitable
for its size and use.
Properly connect dishwasher to electricity,
water, and drain?
t See Installation Instructions for complete
information.
Remove all shipping plugs from hoses
and connectors (such as the cap on the
drain outlet) before installing.t
Remove all hang tags and temporary
labels.
Make sure dishwasher is not used by
anyone unable to operate it properly.
Properly maintain dishwasher. See the
"Caring for Your Dishwasher" section.
Dishwasher Safety
Your safetv and the safety of others is very important°
We have provided many important safety messages in this manual and on your
appliance, Always read and obey all safety messages,
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the
word "DANGER" or "WARNING." These words mean:
You will be killed or seriously injured
if you don't follow instructions.
You can be killed or seriously injured
if you don't follow instructions.
All safety messages will identify the hazard, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING - When using the * Do not operate the dishwasher unless
dishwasher, follow basic precautions,
including the following:
Read all instructions before using the
dishwasher.
Use the dishwasher only for its
intended function.
Use only detergents or rinse agents
recommended for use in a dishwasher
and keep them out of the reach of
children.
When loading items to be washed:
1) Locate sharp items so that they
are not likely to damage the door
seal; and
2) Load sharp knives with the handles
up to reduce the risk of cut-type
injuries.
Do not wash plastic items unless they
are marked "dishwasher safe" or the
equivalent. For plastic items not so
marked, check the manufacturer's
recommendations.
Do not touch the heating element
during or immediately after use.
all enclosure panels are properly in
place.
Do not tamper with controls.
Do not abuse, sit on, or stand on the
door or dish racks of the dishwasher.
To reduce the risk of injury, do not
allow children to play in or on the
dishwasher.
Under certain conditions, hydrogen gas
may be produced in a hot water system
that has not been used for two weeks
or more. HYDROGEN GAS IS EXPLO-
SIVE. If the hot water system has not
been used for such a period, before
using the dishwasher turn on all hot
water faucets and let the water flow
from each for several minutes. This will
release any accumulated hydrogen gas.
As the gas is flammable, do not smoke
or use an open flame during this time.
Remove the door to the washing
compartment when removing an old
dishwasher from service or discarding it.
- SAVE THESE INSTRUCTIONS -
3
Parts and Features
Your dishwasher is illustrated below with the parts and features called out. To help you find
information on specific parts or features quickly, page references are included.
Third level wash
(p. 11)
Top Upper spray arm
(p. 11) tower
(p. 10)
Water inlet Model and
opening number label
(p. 10) (on right side)
Rack bumper POWER CLEAN*
(p. 10) module
Bottom rack
(p. 10) Lower spray arm
Heating element (p. 10)
Silverware Overfill protector
basket (p. 20)
(p. 9) Detergent
(p. 31)
dispensers
(p. 13)
Rinse agent
dispenser
(p. 14)
Door Latch Door color panel t Access panel t
t See Installation Instructions
for information.
4
Centrel panels
Cycle pads Option pads Cycle control knob
900 Model Series
Cycle pads Option pads Signa lights Cycle control knob
915 Model Series
5
Starti Your shwasher
This section tells you how to start or stop your dishwasher. Refer to it for quick reference.
Tip Over Hazard
Do not use dishwasher until
completely installed.
Do not push down on open door.
Doing so can result in serious injury
or cuts.
GROUNDING
_,For a grounded, cord connected
dishwasher:
The dishwasher must be grounded. In
the event of a malfunction or breakdown,
grounding will reduce the risk of electric
shock by providing a path of least
resistance for electric current. The
dishwasher is equipped with a cord
having an equipment-grounding conduc-
tor and a grounding plug. The plug must
be plugged into an appropriate outlet that
is installed and grounded in accordance
with all local codes and ordinances.
WARNING = Improper connection of
the equipment-grounding conductor can
result in a risk of electric shock,
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground
connector in terminal box.
Do not use an extension cord.
Failure to do so can result in death,
fire, or electrical shock.
INSTRUCTIONS
Check with a qualified electrician or
service representative if you are in
doubt whether the dishwasher is
properly grounded. Do not modify the
plug provided with the dishwasher; if it
will not fit the outlet, have a proper
outlet installed by a qualified electrician.
For a permanently connected
dishwasher:
The dishwasher must be connected to a
grounded metal, permanent wiring
system, or an equipment-grounding
conductor must be run with the circuit
conductors and connected to the
equipment-grounding terminal or lead
on the dishwasher.
- SAVE THESE INSTRUCTIONS -
Starting a wash cycle
1. Load the dishwasher. See the "Loading
Your Dishwasher" section.
6. Run hot water at the sink nearest the dish
washer until water is hot. Turn
_ water off.
2. Spin the spray arms. They should
turn freely.
3. Add detergent. See the "Using the
detergent dispenser" section.
4. Add rinse agent, if needed.
5. Close door firmly until it latches.
7. Press a Cycle pad. If desired, press one
"Setting the Controls" section.)
The indicator above each pad
or more Option pads. (See the
will show red when selected.
NOTE: More than one cycle
shares the same pad. The Cycle Control
Knob determines which cycle operates.
8. Turn the Cycle Control Knob clockwise to
i.._ the desired cycle. You will feel
NOTE: If the door is latched, you will hear
the cycles start and stop as the control
knob passes each cycle mark. This is
normal and does not hurt the dishwasher.
If you prefer, you can set the Cycle
Control Knob with the door unlatched.
a definite "stop" at each cycle
matically starts the cycle
mark. The dishwasher auto-
you select.
Stepping the dishwasher
You can stop your dishwasher anytime during
a cycle. All you have to do is:
Open the door slightly. Wait for any filling
or spraying action to stop before opening
the door all the way. Close the door to
continue the cycle.
OR
Turn the Cycle Control Knob slowly
clockwise until you hear water draining.
Let the dishwasher drain completely.
Then open the door and turn the Cycle
Control Knob to Off.
7
Load" Your ishwasher
This section tells how to properly load your dishwasher for best washing and rinsing results.
Preparing to
To save water and energy, do not rinse
dishes before putting them into the
dishwasher.
Remove large pieces of food, bones, and
other hard items. The POWER CLEAN*
module removes food particles from the
water. The module contains a chopping
device which reduces the size of food items.
NOTE: If hard items such as fruit seeds,
nuts, and egg shells enter the POWER
CLEAN module, you might hear chopping,
grinding, crunching, or buzzing sounds.
Those sounds are normal when hard
items enter the module. Do not let metallic
items (such as pot handle screws) get into
the POWER CLEAN module. Damage
can occur.
Foods like eggs, rice, pasta, and cooked
cereals may be hard to remove if left to dry
over a period of time. Run a Rinse-Wash
Later cycle to keep dishes moist if you do
not plan to wash them soon.
Load dishes so soiled surfaces face the
rotating spray arm.
Load dishes so they are not stacked or
overlapping. It is important for the water
spray to reach all soiled surfaces for best
washing. For best drying, water must be
able to drain from all surfaces.
load Veur dishwasher
Loading for quiet operation
Secure lightweight load items in the racks.
Pot lids and handles, pizza pans, cookie
sheets, etc., should not touch interior walls,
interfere with the spray arm's rotation, or
cover the spray tower.
Load dishes so they do not touch one
another.
NOTE: Keep sink drain plugs inserted during
dishwasher operation to prevent noise
transfer through drains.
Loading the silverware basket
Load the silverware basket while it is in the
door or take the basket out for loading on a
counter or table.
Mix items in each section of the basket
with some pointing up and some down to
avoid nesting. Spray cannot reach nested
items.
_MPORTANT: Always load sharp items
(knives, skewers, forks, etc.) pointing
down.
Put small items (baby bottle caps, jar lids,
etc.) in any section.
You can also remove the basket for easy
unloading. Always unload or remove the
basket before unloading the racks to avoid
spilling water on the silverware.
To remove the basket:
1, Grab the basket by the handle and slide it
toward the top of the door.
2, Lift the basket off the holding buttons.
To replace the basket:
1, Set the basket on the holding buttons.
2, Slide the basket towards the bottom of
the door until it locks in place.
To open the basket:
Unhook the latch as shown.
NOTE: Be sure the cover is completely
latched before pulling out the bottom rack
and before closing the dishwasher door.
\
9
Loading the bettem rack
Load items with cooked-on or dried-on food
in the bottom rack, with soiled surfaces
facing inward to the spray.
Mixed load
Load plates, soup bowls, etc., between
prongs and facing inward to the spray.
Make sure pot handles and other items do
not stop rotation of the spray arms. Spray
arms must move freely.
Load items so they do not block or cover
the spray tower.
Load heavily soiled cookware face down
in rack.
Do not stack or overlap dishes. Water
spray must reach all soiled surfaces for
best results.
Utensil load
Load cookie sheets, cake pans, and other
large items at sides and back. Loading
such items in front may keep water spray
from reaching detergent dispenser and
silverware basket.
NOTES:
Do not load glasses, cups, or plastic items
in the bottom rack.
Do not load items between the bottom rack
and the side of the dishwasher tub. This
can block the water inlet opening.
If you have removed the bottom rack for
unloading or cleaning, replace it with
bumpers in front.
Mi
Do not cover spray tower
Utensil load
Bumpers must
face dishwasher door
10
Loading the tep rack
Load the top rack with cups, glasses, and
other small items. Do not cover the third
level wash when loading the top rack.
Cup and glass load
Load so open ends face down for cleaning
and draining.
Load glasses in top rack only - bottom
rack is not designed for glasses. Damage
can occur.
Place items in the rows between prongs.
Placing them over the prongs may lead to
breakage.
Secure lightweight items.
China, crystal, and other delicate items
must not touch each other during dish-
washer operation. Damage may occur.
Mixed load
Small bowls, pans, and other dishes can
be placed in the top rack.
Load plastic items in the top rack only.
Plastic items may melt in the bottom rack.
Wash only plastic items marked "dish-
washer safe."
Load plastic items so the force of the spray
does not move them during the cycle.
Cup and
glass load
Do not cover third level wash
Mixed load _.__
Infinite adjustable top rack
(on some models)
Raise or lower the rack to fit tail items in
either the top or bottom rack. The top rack
does not have to be level.
Turn the knob clockwise to raise a side of
the rack.
Turn the knob counterclockwise to lower a
side of the rack.
Raise
Lower
11
Adjustable 3=position top rack
Ion some modeJs)
You can raise or lower the rack to fit tall
items in either the top or bottom rack. The
high and low positions are marked on the
adjuster on the side facing the center of the
dishwasher.
1, Hold top rack with one hand near
adjuster.
2, Pull top of adjuster lever out with
other hand.
3, Lift or lower rack to one of the preset
positions.
4, Release adjuster lever.
5, Repeat Steps 1=4for the 3 remaining
adjusters as needed. The 4 adjusters
can be raised or lowered separately or
together, as desired. The top rack does
not have to be leveled.
-_11_11_ II first
Then adjust
12
=!
spensers
For best washing results, review the information below. It is important to use detergents and
rinse agents properly.
Using
Use automatic dishwashing detergent
only. Other detergents are too mild and
much too sudsy.
Add detergent just before starting cycle.
Store tightly closed detergent in a cool, dry
place. Fresh automatic dishwasher
detergent results in better cleaning.
the detergent dispenser
Filling the detergent dispenser
The detergent dispenser has one section
with a cover and one without. Push the
cover down firmly until it latches. Detergent
in the open section falls into the dishwasher
when closing the door. The covered section
opens automatically for the main wash.
NOTE: It is normal for the cover to open
partially when dispensing detergent.
Cover Cover latch
How much detergent to use
The amount of detergent to use depends
on the hardness of your water and the type
of detergent. If you use too little, dishes
won't be clean. If you use too much in soft
water, glassware will etch.
Different brands of dishwasher detergent
have different amounts of phosphorus for
softening water. If you have hard water
and use a detergent with a phosphorous
content of less than 8.7%, you may need
to use more detergent, or use a detergent
with a phosphorous content higher
than 8.7%.
Find out your water's hardness by asking
your local water department, water soft-
ener company, or county extension agent.
WATER TYPE WHERE TO FILL
Hard Top of
8+ grains per gallon 3rd step
136+ parts per million (3 tbs)
Use only covered
section for:
- Light
Use both sections for:
= Normal
- Heavy (on some models)
- Pots-N=Pans
Medium Top of
5-7 grains per gallon 2nd step
85-119 parts per million (2 tbs)
Soft Top of
0-4 grains per gallon 1st step
0-68 parts per million (1 tbs)
Fill amounts shown are for standard
powdered detergent. Amounts may vary if
you use liquid or concentrated powdered
detergent. Follow manufacturer's directions
when using liquid dishwasher detergent or
concentrated powdered detergent.
13
Using the rinse agent dispenser
Keep the rinse agent dispenser filled with a
liquid rinse agent. A rinse agent greatly
improves dish drying by helping water
flow off them during the last rinse. A rinse
agent also keeps water from forming
droplets and drying as spots or streaks.
A small amount of rinse agent automati-
cally releases into the rinse water during the
final rinse of each cycle. For best drying
results, check dispenser periodically to
see if it needs filling.
To check dispenser:
Check center of Fill Indicator Cap. Clear
means it needs filling.
OR
Remove Fill Indicator Cap. An "E" is visible
when dispenser is empty.
To fill dispenser:
The rinse agent dispenser holds 6 ounces.
Under normal conditions, this lasts about
3 months.
1. Open dishwasher door completely.
2. Remove Fill Indicator Cap.
3. Add rinse agent. Fill to smallest opening
in lower part of dispenser only. Overfilling
may cause rinse agent to leak out. This
will not harm the dishwasher, but could
cause oversudsing.
4. Clean up any spilled rinse agent with a
damp cloth.
5. Replace Fill Indicator Cap. Keep it closed
tightly.
NOTE: You do not have to wait until the
dispenser is empty before refilling, but do
not overfill it. Your dishwasher is designed
to use a liquid rinse agent. Do not use a
solid or bar-type rinse agent.
Q
Cap center clear
when empty
Keep dispenser filled for best drying results
OR
"E" visible
when empty
Do not fill past
smallest opening
14
Setti Contro|s
Operating your dishwasher's controls properly helps you obtain the best possible washing
results, This section tells you how to select wash cycles and options,
Selecting a wash cycle
Press a Cycle pad. (Some cycles share the same pad.) Turn the Cycle Control Knob to the
desired cycle.
CYCLE
POTS-N-PANS
Double wash for
maximum cleaning
of cooked-on or
baked-on foods.
The water heats to 140°F (60°C) in
both washes.
The water heats to 140°F (60°C) in
the final rinse.
HEAVY
(on some models)
Double wash for
cleaning heavily
soiled loads.
Select Hi-Temp Wash to heat water
in the main wash.
The water heats to 140°F (60°C) in
the final rinse.
A ",f" shows what each cycle includes
J M J J _/ J
JIJ J
CYCLE
TIME
(Minutes)
76t
76t
NORMAL
Double wash for
normal, everyday
soiled loads. (The
Energy Guide label
is based on this cycle.)
Select Hi-Temp Wash to heat water
in the main wash.
The water heats to 140°F (60°C) in
the final rinse.
1-Cycle time includes dry time and may be tonger depending on the temperature of water entering the dishwasher. The cooler the
water, the longer the cycte time, If the water is already hot enough, the cycle times will be as shown, The Cycle Control Knob does
not move while water is being heated.
J J
continued on next page
66 t
15
CYCLE
LIGHT
Single wash for
pre-rinsed or lightly
soiled loads.
Select Hi-Temp Wash to heat water
in the main wash.
The water heats to 140°F (60°C) in
the final rinse.
RINSE-WASH LATER
For rinsing a
few items to be
washed 1 or
more days later,
Do not use detergent,
On 900 Model Series:
The water heats to 140°F (60°C) in
the final rinse.
Select the Air Dry option when
using this cycle.
On 915 Model Series:
Air Dry is automatically selected.
A ",f" shows what each cycle includes
WASH IRINSE
iWASH
RINSE DRY
J J
J
CYCLE
TIME
(Minutes)
60t
16tt
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the
water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. The Cycle Control Knob does
not move while water is being heated.
1-1-Cycle time may be longer on 900 Model Series depending on the temperature of water entering the dishwasher.
Canceling a cycle
You can cancel a cycle at any time.
1. Turn the Cycle Control Knob slowly
clockwise until you hear water draining,
Let the dishwasher drain completely,
2. Open the door.
3. Turn the Cycle Control Knob to Off.
16
SeJecting cycle eptiens
If desired, press one or more Option pad(s).
You can press an Option pad after the
dishwasher starts as long as the cycle has
not passed the point that the option is used.
For example, you can press Air Dry any time
before the Cycle Control Knob reaches Dry.
Hi=Temp Wash
When Hi-Temp Wash is selected, the
dishwasher heats the water during
the main wash of the Light, Normal,
and Heavy cycles. Heating the
water helps improve washing
results. The Pots-N-Pans cycle
automatically uses Hi-Temp Wash.
NOTE: The Cycle Control Knob does not
move while water is being heated. Once the
water reaches the proper temperature, the
Cycle Control Knob will begin moving again.
Changing a eyeJe setting
You can change a cycle setting anytime
during any cycle.
1. Lift up the door latch to stop the cycle.
2. Turn the Cycle Control Knob clockwise to
the desired cycle.
3. If desired, press one or more Option pad(s).
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
Air Dry
When Air Dry is selected, the air in the
dishwasher is not heated during
the "dry" portion of a cycle. Using
Air Dry helps save energy, but
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid
rinse agent.
NOTE: The dishwasher automatically heats
the air in the dishwasher during the "dry"
portion of the cycle unless you select Air Dry.
For 900 Model Series:
Always select the Air Dry option when
using the Rinse-Wash Later cycle.
For 915 Model Series:
The Air Dry option is automatically selected
for the Rinse-Wash Later cycle.
NOTE: Turning the Cycle Control Knob
can cause the covered section of the
detergent dispenser to open and release
the detergent. Check the covered section
if setting a cycle.
5. Close the door firmly until it latches. The
dishwasher starts the new cycle.
Changing an eption
You can change option settings anytime
during a cycle as long as the
cycle has not passed the point
that the option is used. For
example, you can press Air
Dry anytime before the Cycle
Control Knob reaches Dry.
1. Press the Reset Options pad.
2. Press 1 or more Option pad(s).
setting
17
Adding an item during
You can add an additional item to the
dishwasher anytime before the Cycle Control
Knob reaches Light. Items added after the
Cycle Control Knob reaches Light may only
be rinsed,
1. Lift up the door latch to stop the cycle.
Wait for spraying action to stop before
opening the door.
2. Open the door and add the item.
Using delay wash
(en seine meee_s}
You can set the dishwasher to start a cycle
from 1 to 4 hours later.
1. Press the desired Cycle pad.
2. Press the desired Option pad(s).
3. Turn the Cycle Control Knob clockwise to
the number of hours (from 1 to 4 hours)
you want the dishwasher to delay before
the selected cycle starts.
4. Close and latch the door. The Delay/
Water Heating signal light will come on
until the selected cycle starts.
NOTES:
You can add items while time is counting
down. Close and latch the door, The Cycle
Control Knob will not advance if the door is
unlatched,
Rinse-Wash Later and Light cycles cannot
be delayed,
The Delay/Water Heating signal light will
also come on while the water is heating
during all cycles.
a cycle
3. Close the door, but do not latch it. Wait
30 seconds for the air in the dishwasher
to warm up. Doing so reduces the
amount of moisture in the vent when
restarting a cycle.
4. Close the door firmly until it latches. The
dishwasher resumes the cycle.
The clean signal light
(en sere _odels}
The Clean signal light will come on when a
washing cycle is complete. To turn it off, turn
the Cycle Control Knob clockwise slightly
until the light goes off.
18
ashing Special items
If you have any doubts about washing a particular piece of tableware, check with the
manufacturer to see if it is dishwasher safe.
MATERIAL DISHWASHER SAFE? EXCEPTIONS/SPECIAL INFORMATION
Aluminum Yes High water temperature and detergents can pit
finish of anodized aluminum.
Bottles No
and Cans
Cast iron No
China/ Yes
Stoneware
Crystal Yes
Gold No
Glass Yes
Hollow-
Handle
Knives
Pewter No
Disposable No
Plastics
Plastics Yes
Stainless Yes
Steel
Sterling
Silver or
Silver Plate
Tin No Can rust.
No Handles of some knives are attached to the
Yes
Wash bottles and cans by hand. Labels attached
with glue can loosen in your dishwasher. Loose
labels and glue can clog spray arms or the pump
and will reduce washing performance.
Seasoning will be removed and iron will rust.
Always check manufacturer's recommendations
before washing. Antique, hand-painted, or over-
the-glaze patterns may fade. Gold leaf can
discolor or fade.
Always check manufacturer's recommendations
before washing. Some types of leaded crystal
can etch with repeated washings.
Gold-colored flatware will discolor.
Milk glass will yellow with repeated dishwasher
washing.
blade with adhesives which may loosen if
washed in the dishwasher.
High water temperatures and detergent can
discolor or pit finish.
Cannot withstand high water temperatures and
detergents.
Always check manufacturer's recommendations
before washing. Plastics vary in their capacity to
withstand high water temperatures and deter-
gents. Load plastics in top rack only.
Run the Rinse-Wash Later cycle if not washing
immediately. Prolonged contact with food
containing salt, vinegar, milk products, or fruit
juice can damage finish.
Run the Rinse-Wash Later cycle if not washing
immediately. Prolonged contact with food
containing salt, acid, or sulfide (eggs, mayon-
naise, and seafood) can damage finish.
Wooden No Wash by hand. Always check manufacturer's
Ware recommendations before washing. Untreated
wood can warp, crack, or lose its finish.
19
m
for Your Dishwasher
Your new dishwasher is designed to give you many years of dependable service. There are a
few things you can do to maintain your dishwasher properly. This section tells you how to
clean and care for your dishwasher. Refer to the "Solving Common Dishwashing Problems"
section for special cleaning problems. See Installation Instructions for information on storing
your dishwasher and for cleaning the drain air gap.
Cleaning the exterior
In most cases, regular use of a soft, damp
cloth or sponge and a mild detergent is all
that is necessary to keep the outside of your
dishwasher nice looking and clean.
Cleaning the
Hard water minerals may cause a white film
to build up on the inside surfaces, especially
just beneath the door area. To clean interior:
Apply powdered dishwasher detergent to a
damp sponge to make a paste.
OR
Use liquid automatic dishwasher detergent
and clean with damp sponge.
Do not clean the dishwasher interior until it
has cooled.
Wear rubber gloves. Do not use any type of
cleanser other than dishwasher detergent
because it can cause foaming or sudsing.
NOTE: See "Removing spots and film" in the
"Solving Common Dishwashing Problems"
section to clean your dishwasher with white
vinegar. Remember, this procedure is
intended for occasional use only. Vinegar is
an acid. Excessive use can damage your
dishwasher.
Overfill protector
The overfill protector (in the front right corner
of the dishwasher tub) keeps the dishwasher
from overfilling. It must be in place for the
dishwasher to operate.
Check under the float for objects that may
keep the protector from moving up or down.
20
Stering Vour dishwasher
Moving or winterizing your
dishwasher
Protect your dishwasher and home against
water damage due to freezing water lines. If
your dishwasher is left in a seasonal dwell-
ing or could be exposed to near freezing
temperatures, have a qualified person do
the following:
1. Disconnect power supply to the
dishwasher.
2. Turn off water supply to the dishwasher.
3. Remove the 4 screws on the lower
access panel and remove the lower
access panel.
4. Place a shallow pan under the water
supply valve. Then, use a wrench to
disconnect the water inlet from the water
supply valve. Separate the water inlet
from the water supply valve and drain
water into the pan.
5. Remove the spring clamp from the water
outlet and separate from the water
supply valve; drain water into pan.
6. Reconnect both water inlet and water
outlet to the water supply valve.
7. Empty the pan and reposition it under
the water pump.
8. Remove the clamp and disconnect the
drain hose from the water pump; drain
water into pan.
9. Reconnect drain hose to the water
pump, being sure to position the clamp
over the connection.
10. Replace the lower access panel.
Water outlet clamp hose
Spring Drain
I
Water supply Water Water pump
valve inlet and motor
continued on next page
21
NOTE:Ifyourdishwasherisconnectedto
agarbagedisposal,donotrunwaterinto
thesinkafterwinterizing.Thiscouldcause
watertorefillthedrainhoseonyour
dishwasher.
Reconnecting your dishwasher
1, Remove the 4 screws on the lower
access panel and remove lower
access panel.
2, Turn on the water supply to dishwasher.
3, Turn on power supply to dishwasher.
4, Run dishwasher through a complete cycle
and check for leaks.
5oReplace lower access panel.
Storing for the summer
Protect your dishwasher during the summer
months by turning off the water supply and
power supply to the dishwasher.
22
Loading...