Whirlpool DEMO WBV3387 IX Product Sheet

A. Refrigerator Compartment

1. Lighting

2. Filter in the fan
2a. button of fan
2b. cover of fan

3. Shelves / Shelf area

4. Bottle rack

5. Multi-flow cold air system

6. Cooler compartment (best for meat and fish)

7. Rating plate with commercial name

8. Fruits and vegetables crisper

9. Crisper divider

10. Reversibility kit

11. Separator

12. Door trays

B. Freezer Compartment

13. Upper basket (freezing zone)

14. Ice tray and/or cold accumulator

15. Shelves

16. Storage baskets for frozen food items

17. Door seals

C. Control panel

Anti-bacterial protection (depending on the model):

- Antibacterial filter in the fan (2)

- Antibacterial additives in the Crisper (8)

- Door seals are made of material able to inhibit bacterial

growth (17)

Notes:

- Depending on the model the number and type of

accessories may vary.

- In case of power failure the cold accumulator helps to

keep optimal storage temperature longer.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depend on

the ambient temperature, frequency of opening the
doors, as well as location of the appliance. Temperature
setting must consider these factors.

- The appliance accessories are not suitable for washing

dishwasher.

- After inserting food, ensure that the freezer

compartment door closes properly.

TO INCREASE STORAGE

The freezer compartment can be used without the
baskets to increase storage and for large products.
You can place the food products directly on the racks.

HOW TO START THE APPLIANCE FIRST
TIME

After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
few seconds.
The default (factory) values of the freezer compartment
and refrigerator compartment settings light-up.

FAN WITH A BUTTON

The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the "6th
Sense Fresh Control" function can work properly and also
when the ambient air temperature is above 27 ÷ 28°C or
if you perceive drops of water on the glass shelves or in
the severe humidity conditions.

Note: Do not obstruct the air intake area with food
items.

To guarantee the right performance at low ambient
temperature (colder than 18C) and to minimize Energy
Consumption, turn off the fan.

To turn off the fan press the button (2a).

If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box (found in the crisper drawer
(item 8) and insert into the cover of fan (item 2b).
The replacement procedure is attached with the filter.

CONTROL PANEL

1. Temperature LEDs

2. On / Stand-by icon / button

3. 6th Sense Fresh Control icon

4. Eco Night icon / button

5. Temperature icon / button

6. Door Open icon

7. Reset button / Alarm icon

8. Key-Lock icon

9. Fast Cool icon / button

PRODUCT SHEET

GB

CAUKRROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

FUNCTIONS

On/Stand-by

This function turns On/Stand-by both the refrigerator
and freezer compartments.
To put the product in Stand-by, press & hold the
On/Stand-by button for 3 seconds. All the icons turn
off except On/Stand-by icon back light to indicate
that the appliance is in Stand-by. When the appliance
is in Stand-by, the light inside the refrigerator
compartment does not work.
Remember that this operation does not disconnect
the appliance from the power supply.
To switch the appliance on again, simply press the
On/Stand-By button.

Fridge Temperature

To adjust the Fridge Temperature, press the
Temperature button.
Is used to set desired temperature level, from
warmest through lower to coldest .
Pressing pushbutton set-point will change cyclically.
Temperature set-point is done for both compartments
at one time – fridge and freezer.
At first plug-in of appliance factory set-point is chosen
– medium position.
Following table shows set-points level:

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

Legend: Led ON Led OFF

Fast Cool

Using Fast Cool function it is possible to increase the
cooling in the refrigerator compartment. The use of
this function is recommended when placing a very
high quantity of food in the refrigerator compartment.
Press the Fast Cool button to activate/deactivate
Fast Cool function.
When activated, the Fast Cool icon will be turned on.
The function is automatically disabled after 6 hours, or
can be manually disabled by pressing again the Fast
Cool button.

Note:

- Fast Cool function should be also switched ON
before placing fresh food to be frozen in the freezer
compartment, in order to maximize the freezing
capacity.

Eco Night

Eco Night function allows to concentrate the energy
consumption of the product during off-peak time
(usually coinciding with night time), when energy is
available in large quantity and it costs less than during
the day (only in specific countries using multiple-rate
system based on off-peak times - check your rate plan
with your utility company).
To activate the function, press the Eco Night
button at the starting moment of the off-peak rate
(depending on your specific rate plan). For example, if
the off-peak rate starts at 20:00, you have to press
the button at that time. When the Eco Night icon
is ON, the function is active. After you activate the
function, the product automatically starts to adapt the
energy consumption to the time, i.e. consuming less
energy during the day then during the night.

IMPORTANT: In order to work in a correct way, the
function must be active both during the night and the day.

The feature remains active until you deactivate it (or if
a blackout occurs, or if the product is switched off).
To deactivate the function, press the Eco Night
button. When the Eco Night icon is OFF the
function is not active.

Note: appliance energy consumption is declared with
Eco Night function disabled.

"6th Sense Fresh Control"

This function allows optimum storage conditions
(regarding temperature and humidity) to be quickly
reached inside the appliance. The fan must also be
switched on for it to work properly. The "6th Sense
Fresh Control" is activated by default.
To manually deactivate the function, press the Fast
Cool and Eco Night buttons for 3 sec.: you will
hear a long acoustical signal as confirmation that the
feature has been deactivated. The function can be
reactivated by repeating the same procedure: you will
hear double long acoustical signals a long acoustical
signal as confirmation that the feature has been
activated.
In the event of an interruption in electricity or exit
from Stand-by to normal mode, the "6th Sense

Fresh Control" status resets to default i.e. active.

Smart Display

This energy saving feature allows to reduce power
consumption by automatically turning off the display
when not in use. To activate the Smart Display, press

Temperature and Fast Cool buttons at the
same time for 3 seconds until the acoustic signal
sounds. Two seconds after the Smart Display
activation, the display goes off, except the "6th Sense
Fresh Control" icon (and the alarms, if any). To
adjust temperature or use other functions, it is
necessary to activate the display by pressing any
button. After about 15 seconds without any action,
the display will go off again, with the "6th Sense

CAUKRROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

GB