Whirlpool CVC 14 INSTRUCTION FOR USE
6gb33044.fm Page 1 Monday, May 5, 2003 3:56 PM
PRODUCT SHEET
1.
Compartment for freezing
2.
Control unit
3.
Area for drawers and pull out baskets/doors
4.
Pull-out defrost water drain
5.
Rating plate (on the inside of the appliance)
6.
Ice packs (inside) if provided.
Storage compartment
Area for freezing
Note: the design of drawers and accessories may vary, depending on the model.
Controls
(depending on model)
GB
Located on the rear of
the appliance
A
Thermostat knob.
B
Yellow led (if provided): indicates that the fast freeze function is in operation.
C
Red led (if provided): indicates that the freezer internal temperature is too high.
D
Green led (if provided): indicates that the appliance is connected to the power supply.
E
Fast freeze button (if provided).
F
External luminous thermometer (if provided).
G
Mechanical thermometer (if provided).
D F NL E P GR
GB
I
S N FIN
DK
6gb33044.fm Page 2 Monday, May 5, 2003 3:56 PM
Freezer compartment temperature adjustment
The appliance is normally factory set for optimum operation at a temperature of -18°C.
To adjust the compartment temperature, proceed as follows:
•
Turn the thermostat knob A to
•
Turn the thermostat knob A to
•
Turn the thermostat knob A to
power supply).
for a storage temperature that is less cold.
1/Min
Maximum
z
/
0
for a colder storage temperature.
to switch off the freezer (the appliance is still connected to the mains
Alarm signals
Signal Cause Solution
Temperature
alarm
(if present)
The red LED C lights up
(and the acoustic alarm
sounds in models with
luminous thermometer F)
The internal temperature
is above -12°C
Press button E until the
temperature returns
below -12°C
Spacers
(if provided)
Printed in Italy 05/03
5019 603 33044
D F NL E P GR
GB
I
S N FIN
DK
Loading...