Whirlpool Cabrio WTW5640XW2, Cabrio WTW5640XW0, Cabrio WTW5610XW2, Cabrio WTW5600XW0, Cabrio WTW5600XW1 Use And Care Manual
...
cabrto
FABRIC CARE SYSTEM
TOP-LOADING
HIGH EFFICIENCY
LOW-WATER WASHER
USE AND CARE GUIDE
Para una version de estas instrucciones en espafiol, visite www.Whirlpool.com
Table of Contents Table des matibres
WASHER SAFETY ......................................................... 2
WHAT'S NEW UNDER THE LiD? ................................. 3
CONTROL PANEL AND FEATURES ............................ 4
CYCLE GUIDE ............................................................... 6
USING YOUR WASHER ................................................ 7
Using Laundry Product Dispensers ...............................8
Starting Your Washer ......................................................8
WASHER MAINTENANCE .............................................. 10
TROUBLESHOOTING ...................................................... 12
WARRANTY ........................................................................ 17
ASSISTANCE OR SERVICE ...........................Back Cover
GUIDE D'UTILISATION
ET D'ENTRETIEN DE
LA LAVEUSE HAUTE
EFFICACITI_ A FAIBLE
CONSOMMATION D'EAU
AVEC CHARGEMENT PAR
LE DESSUS
SI_CURITi_ DE LA LAVEUSE ...................................... 18
QUOI DE NEUF SOUS LE COUVERCLE? ................ 19
TABLEAU DE COMMANDE
ET CARACT¢:RISTIQUES .......................................... 20
GUIDE DES PROGRAMMES ...................................... 22
UTILISATION DE LA LAVEUSE .................................. 24
Utilisationdes distributeurs de produitsde lessive...25
Mise en marche de la laveuse......................................25
ENTRETIEN DE LA LAVEUSE ........................................ 29
DI_PANNAGE ...................................................................... 31
GARANTIE ..........................................................................38
ASSISTANCE OU SERVICE ..............Couverture artiste
W10280475C
W10280476C - SP
Designed to use only HE High Efficiency
detergents.
Con_ue pour I'utilisation d'un d6tergent haute
efficacit6 seulement.
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injuryto persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry=cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[]
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.
SAVE THESE INSTRUCTIONS
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach into the washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where itwill be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user=repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructions for grounding instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
2
WHAT'S NEW UNDER THE LID?
Cleaaiag with Less
oo O]
Traditional agitator-style
washer
The most striking difference inyour new washer is the low-water
washplate wash system. The washer automatically adjusts the
water level to the load size--no water level selector is needed.
When loading the washer with dirty laundry, fill it evenly
around the basket wall.
Washer with low-water
washplate wash system
Automatic Load Size Sensiag
As the washer dampens and moves the load, the level of the
clothes will settle in the basket. This is normal, and does not
indicate that more clothes should be added.
IMPORTANT: You will not see a washer basket full of water
as with your past agitator-style washer.
Choosiag the Right Detergent
Use only High Efficiency detergents. The package will be
marked "HE" or "High Efficiency." Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using
regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
Use only High Efficiency (HE) detergent.
Once you start the cycle, the lid will lock, and the washer will
begin the sensing process to determine the correct water level
for the load. This may take several minutes before water is
added. You will find a step-by-step description in the "Cycle
Status Lights" section.
You will hear the motor turn the basket in short pulses to
thoroughly wet the load. This low-water wash method uses
less water and energy compared to a traditional agitator-style
washer.
Concentrated Cleaniag
Low-water cleaning means concentrated cleaning. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds and
noises that are different from those of your previous washer.
For example, you may hear a clicking and hum at the beginning
of the cycle, as the lid lock goes through a self-test. There
will be different kinds of humming and whirring sounds as the
washplate moves the load. And sometimes, you may hear
nothing at all, as the washer determines the correct water level
for your load or allows time for clothes to soak.
3
CONTROL P EL FEATURES
QUICKWASH
NORMAL
POWER START Temp Soil Spin Deep Delay
@ ECO MONITOR
Your washer is specially designed to conserve energy
and water. Each cycle, along with any selected options,
will result in different energy usage. As you make your cycle
and temperature selections, the Eco Monitor shows how
well you are saving energy. Adjust the temperature and spin
speed within that cycle to improve energy usage. Using the
EcoBoost setting on a cycle can also be a one-touch way to
improve your Eco Monitor rating on many cycles.
O WASH CYCLE KNOB
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
CYCLE OPTIONS
Whenyou select acycle, its default settings will light up.
TEMP
Temperature Control senses and maintains uniform
water temperatures by regulating incoming hot and
cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
• Warm and hot water will be cooler than what your
previous washer provided.
• Even in a Cool water wash, some warm water may
be added to the washer to maintain a minimum
temperature.
SOIL LEVEL
Soil level (wash time) is preset for each wash cycle.
As you press Soil Level, the cycle time (minutes) will
increase or decrease in the Estimated Time Remaining
display and a different wash time will appear.
For most loads, use the soil level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press Soil Level to select more wash time, if
needed. For lightly soiled and delicate fabrics, press Soil
Level to select less wash time, if needed. Lower soil level
setting will help reduce tangling and wrinkling.
4
Sensing Soak W_sh Rinse Spin Done
I I
You may also add or remove options for each cycle. Note
that not all options can be used with all cycles, and some
are preset to work with certain cycles.
allcolddnses Level Speed Clean Wash
co c:_ co co co Soft
C:3 Loud
CC)CC)CC) CC) CC)
_F;¸EcoBoost Presoak Extra Fabdc Cycle
I
SPIN SPEED
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can be
changed. Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling inyour load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp.
DEEP CLEAN/CLEAN BOOST
This option provides enhanced cleaning action for tough
stains. It will add additional agitation and soak time to
the cycle.
DELAY WASH
If you would like to set your washer to start at a preferred
time, select the Delay Wash option. You can use this
option to delay start of a wash cycle for up to 9 hours
(depending on model). Press Delay Wash button once
to delay 1 hour. Ifyou want a longer delay period, press
and hold the button until your desired delay time (in hours)
shows in the Estimated Time Remaining display, up
to 9H. Then press START/Pause/Unlock to set the delay.
The countdown to the wash cycle will show inthe
display window.
ECOBOOST
The EcoBoost option allows you to increase your energy
savings on your wash cycles. When this option is used,
the wash cycle will use slightly cooler wash water than
the selected temperature. The indicated temperature will
not change.
PRESOAK
Use this option to add an extra soak period to any cycle
when washing heavily soiled garments. You can adjust the
length of the soak period by changing the Soil Level.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
FABRIC SOFTENER
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
Rinse Softener Signal
CYCLESIGNAL
Usethisoptiontoadjustvolumeofthesignalthatsounds
atendofcycle.YoumayselectLoud,Soft,orOff(no
indicatorlit).Aloudersignalishelpfulinremovingitems
assoonascycleiscomplete.
To turn button sounds on or off:
Press and hold Cycle Signal for 3 seconds to turn the
button sounds off or on.
O EST TiME REMAiNiNG DISPLAY
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load size
and water pressure may affect the time shown in the display.
Overloading, unbalanced loads, or excessive suds may
cause the washer to adjust the cycle time, as well.
SOAK Sensing Soak Wash Rinse Spin Done
This portion of the cycle allows water to soak into the load for
optimal cleaning.
WASH = =, o
You will hear the motor and washplate moving the load.
Unlike traditional washers, the load is not covered with water.
Low-water cleaning means concentrated cleaning. Rather than
diluting detergent as done in an agitator-style washer, this washer
delivers the detergent directly to the soils. The motor sounds
may change at different stages in the cycle. The wash time is
determined by the selected soil level.
Sensing Soak Wash Rinse Spin Done
CYCLE STATUS LIGHTS
Sensing Soak Wash Rinse Spin Done
The Cycle Status Lights shows the progress of a cycle. At
each stage of the process, you may notice sounds or pauses
that are different from traditional washers.
SENSING
When the Start/Pause/Unlock button is pressed,
the washer will first perform a self-test on the lid lock
mechanism. You will hear a click, the basket will make
a slight turn, and the lid will unlock briefly before
locking again.
Once the lid has locked the second time, the washer
will use short, slow spins to estimate the load size. These
sensing spins may take 2 to 3 minutes before water is added
to the load and you may hear the hum of these spins. If the
sensing light is on, the washer is working properly. You will
hear the motor turn the basket in short pulses to thoroughly
wet the load. The washer will then move the load briefly,
pause to allow water to soak in to the load, and resume
adding water. This process may repeat until the correct
amount of water has been added for the load. You may
also hear water flowing through the dispenser, adding
detergent to the load.
NOTE: Avoid opening the lid during sensing. The
sensing process will start over when the washer is
restarted.he sensing light may also come on during
the Soak and Wash portions of the cycle. This is normal.
Sensing Soak Wash Rinse Spin Done
RINSE
Sensing Soak Wash Rinse Spin Done
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. You may hear the motor turning on
briefly (short hum) to move the basket while filling. Fabric softener
will be added if the Fabric Softener option was selected. Some
cycles use spray rinsing.
SPIN
Sensing Soak Wash Rinse Spin Done
The washer spins the load at increasing speeds for proper water
removal, based on the selected cycle and spin speed.
DONE
Sensing Soak Wash Rinse Spin Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCK
To allow for proper load sensing and spinning, the lid
will lock and the Lid Lock light will turn on. This light
indicates that the lid is locked and cannot be opened.
If you need to open the lid, press START/
m
Lid
Lock
CD
Pause/Unlock. The lid will unlock once the
washer movement has stopped. This may
take several minutes if the load was spinning
at high speed. Press START/Pause/Unlock
START
Pause/Unlock
again to resume the cycle.
5
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle
that best fits the load being washed.
Not all cycles and options are available on all models.
Machine-wash
silks, hand-
wash fabrics
Small loads,
cottons,
polyester,
perm press
No-iron fabrics,
cottons, perm
press, linens,
synthetics
Cottons, linens,
and mixed
garment loads
Large items
such as sheets,
sleeping bags,
small comforters
jackets, and
small rugs
Sturdy fabrics, Heavy Hot/Cold High Extra Heavy Deep Clean* Use this cycle for heavily soiled or
colorfast items, Duty Warm/Cold No Spin Heavy Extra Rinse sturdy items. Water-level sensing process
towels, jeans Cool/Cold Medium Delay Wash may take longer for some items than for
Heavily soiled
white fabrics
Heavily soiled
fabrics
Swimsuits and
items requiring
rinsing without
detergent
Hand-washed
items or
dripping
wet items
No clothes in
washer
Delicates
Quick
Wash
Casual
Normal
Bulky
Items
k
Whites
Soak
Rinse &
Spin
Drain &
Spin
Clean
Washer
with
Affresh '_
Hot/Cold High Extra Heavy Deep Clean*
Warm/Cold Low Heavy Extra Rinse
Cool/Cold No Spin Medium Delay Wash
Cold/Cold Light EcoBoost
Tap Cold/Cold Presoak
Hot/Cold High Extra Heavy Deep Clean*
Warm/Cold Low Heavy Extra Rinse
Cool/Cold No Spin Medium Delay Wash
Cold/Cold Light EcoBoost
Tap Cold/Cold Presoak
Hot/Cold High Extra Heavy Deep Clean*
Warm/Cold Low Heavy Extra Rinse
Cool/Cold No Spin Medium Delay Wash
Cold/Cold Light EcoBoost
Tap Cold/Cold Presoak
Hot/Cold High Extra Heavy Deep Clean*
Warm/Cold No Spin Heavy Extra Rinse
Cool/Cold Medium Delay Wash
Cold/Cold Light EcoBoost
Tap Cold/Cold Presoak
Hot/Cold High Extra Heaw Deep Clean*
Warm/Cold Low Heavy Extra Rinse
Cool/Cold No Spin Medium Delay Wash
Cold/Cold Light EcoBoost
Tap Cold/Cold Presoak
Cold/Cold Light EcoBoost others because they will absorb more
Tap Cold/Cold Presoak water than other fabric types.
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Tap Cold/Cold
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Tap Cold/Cold
Tap Cold/Cold
Hot/Cold High Extra Heavy
High Extra Heavy Deep Clean*
Low Heavy Extra Rinse
No Spin Medium Delay Wash
No Spin Extra Heavy Delay Wash
High
Low
No Spin
High
Low
No Spin
Light EcoBoost
Presoak
Heavy EcoBoost
Medium
Light
* Or Clean Boost (on some models).
Use this cycle to wash lightly soiled
garments indicating "Machine Washable
Silks" or "Gentle" cycle on the care label.
Place small items in mesh garment bags
before washing. This cycle uses a higher,
preset water level.
Use this cycle to wash small, lightly
soiled loads of 2-3 items that are needed
in a hurry. This cycle features a spray
rinse.
Use this cycle to wash loads of no-iron
fabrics such as sport shirts, blouses,
casual business clothes, permanent
press, and blends.
Use this cycle for normally soiled
cottons and mixed fabric loads. This
cycle features a spray rinse. Low speed
spin is not available.
Use this cycle to wash large items such as
jackets and small comforters. The washer
will fill with enough water to wet down the
load before the wash portion of the cycle
begins, and uses a higher water level than
other cycles. Do not overload basket.
Deep Clean and Extra Rinse are default
options, but may be turned off. For
maximum soil removal use liquid
chlorine bleach.
Use this cycle to soak smail spots of set-in
stains on fabrics. After time has expired,
washer will drain, but will not spin. To set
a follow up cycle, select Drain & Spin, add
additional detergent and select a cycle
based on fabric type.
Combines a rinse and spin for loads
requiring an additional rinse cycle or to
complete a load after power interruption.
Spin speed is selectable; default is high.
This cycle uses a higher, preset water level.
Also use for loads that require rinsing only.
This cycle uses a spin to shorten drying
times for heavy fabrics or special-care
items washed by hand. Use this cycle to
drain washer after cancelling a cycle or
completing a cycle after a power failure.
Use once a month to keep the inside
of the washer fresh and clean. Higher
water levels and Affresh work together
to thoroughly clean the washer interior.
J
6
USING YOUR WASHER
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
1, Sort and prepare your laundry
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
• Empty pockets. Loose change, buttons, or any small object
can pass under the washplate and become trapped, causing
unexpected sounds.
• Sort items by recommended cycle, water temperature,
and colorfastness.
• Separate heavily soiled items from lightly soiled.
• Separate delicate items from sturdy fabrics.
• Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
• Treat stains promptly.
• Close zippers, fasten hooks, tie strings and sashes, and
remove non-washable trim and ornaments.
• Mend rips and tears to avoid further damage to items
during washing.
Helpful Tips:
= When washing water-proof or water-resistant items, load
evenly. See "Cycle Guide" for tips and more information on
using the Bulky Items cycle.
• Use mesh garment bags to help avoid tangling when washing
delicate or small items.
• Turn knits inside out to avoid pilling. Separate lint-takers from
lint-givers. Synthetics, knits, and corduroy fabrics will pick up
lint from towels, rugs, and chenille fabrics.
Always read and follow fabric care label instructions to avoid
damage to your garments.
Load garments in loose heaps evenly around basket wall.
Do not wrap large items such as sheets around the washplate;
load them in loose piles around the sides of the basket. Try
mixing different sized items to reduce tangling.
IMPORTANT: Items need to move freely for best cleaning and
to reduce wrinkling and tangling.
7
Usiag Lauady Product Dispensers
Add HE detergent to dispenser
Detergent tray
Add a measured amount of
HE detergent into detergent tray. This
tray holds 3 oz. (89 mL). Do not overfill tray - adding too much
detergent may cause detergent to be dispensed into the washer
too early.
IMPORTANT: Use only High Efficiency detergents. The package
will be marked "HE" or "High Efficiency." Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
Using Oxi or color=safe bleach:
If using an Oxi or color-safe bleach laundry boost product, add
to the bottom of the washer basket before adding clothes.
HELPFUL TIP: See "Washer Maintenance" for information
on recommended method of cleaning washer dispenser trays.
Fabric softener tray
Fabric
Pour a measured amount of liquid Softener
fabric softener into tray, always
follow manufacturer's directions for correct amount of
fabric softener based on your load size. Close dispenser
drawer, then select Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected
to ensure proper distribution at correct time in cycle.
Do not overfill or dilute. Overfilling dispenser will cause
fabric softener to immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be
dispensed into the last rinse.
It is normal for a small amount of water to remain in the
dispenser at the end of a cycle.
$tartiag Your Washer
6, Press POWER to turn on washer
r
4, Add liquid chlorine bleach
to dispenser
Do not overfill, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
8
POWER
Make sure the dispenser drawer is closed completely, then press
POWER to turn on the washer.
7. Select cycle
8, Select cycle settings
CASUAL
QUICKWASH
DELICATE
JLKYITEMS
HEAVY DUTY
WHITES
CLEAN
NORMAL
WASHER
with affr_
SOAK
_:INSE& SPIN
DRAIN & SPIN
Turn cycle knob to choose your wash
cycle. When knob is lined up with a
cycle, you will hear a clicking sound.
Indicator for Estimated Time Remaining
will light up with a cycle time. For more
information, see "Control Panel".
If you do not want to begin a cycle
immediately, you may choose DELAY
WASH option.
To set a delayed Start:
N
1. Press DELAY WASH button to select desired
start time.
Delay
Wash
2. Press START/Pause/Unlock to set the delay.
CD
The delay countdown has started when the
START/Pause/Unlock light stops blinking.
START
To cancel delaying a cycle:
Pause/Unlock
Press START/Pause/Unlock again to begin
a wash cycle immediately.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the detergent dispenser tray. Powdered detergents may
absorb moisture from a previous cycle and clump before the
wash cycle begins.
Hot
Warm
Cool
Cold
Tap Cold
Temp Soil Spin
all coldrinses Level Speed
Extra Heavy
Medium Low
Heavy i High
Light No Spin
Once you select a cycle, the default settings for that cycle
will be lit. Press the cycle settings buttons to change the
Temperature, Soil Level, and Spin Speed, if desired.
Always read and follow fabric care label instructions
to avoid damage to your garments.
::i Some cold water is added to save Whites and pastels
::i energy. This will be cooler than Durable garments
your hot water heater setting. !i Heavy soils
Warm
Some cold water will be added,
so this will be cooler than what
Bright colors
Moderate to light soils
your previous washer provided.
Cool - brights/darks
Warm water is added to assist in
soil removal and to help
dissolve detergents.
Colors that bleed
or fade
Light soils
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
Tap Cold
This is the temperature from your Dark colors that
faucet, bleed or fade
Light soils
9
9. Select cycle options
m mid _ mt _ Soft
Deep Delay
Clean Wash
I Loud
WASHER r INTENANCE
r
WATER INLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of
replacement on the label with a permanent marker.
EcoBoost Presoak Extra Fabric Cycle
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Deep Clean or Extra Rinse. These can be
turned off, if desired.
NOTE: Not all options are available with all cycles.
Rinse Softener Signal
1 0. Press START/Pause/Unlock to
begin wash cycle
CD
START
Pause/Unlock
Press the START/Pause/Unlock button to start the wash
cycle. Filling is delayed for several minutes while load balance
is sensed. When the cycle has finished, the DONE indicator
will light and the end of cycle signal will sound (if set).
Promptly remove garments after cycle has completed to
avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the
washer movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid and
press START/Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes the water will
pump out automatically.
f CLEANING YOUR WASHER
Keep your washer as clean and fresh as your clothes.
To keep washer interior odor-free, follow this recommended
monthly cleaning procedure:
1. Make sure the washer is empty.
2. Using recommended AFFRESH ®washer cleaner,
add one tablet to washer drum
OR
If using liquid chlorine bleach, add 1 cup (250 mL) to
liquid chlorine bleach dispenser.
IMPORTANT: Do not add detergent to CLEAN WASHER
with AFFRESH T_cycle. Do not use more than recommended
amount of bleach to avoid damaging product over time.
3. Close washer lid.
4. Press POWER.
5. Select CLEAN WASHER with AFFRESH TMcycle.
6. Press START/Pause/Unlock. Water will pour into
washer for a moment and pause, lid will lock, then
cycle will continue.
NOTE: For best results, do not interrupt cycle. If cycle must
be interrupted, press Power and run a RINSE AND SPIN
cycle to ensure cleaner or bleach have been rinsed from
washer.
To clean exterior:
1. Use a soft, damp cloth or sponge to wipe up any spills.
2. Use all-purpose surface cleaner, if needed.
IMPORTANT: To avoid damaging the washer's finish,
do not use abrasive products.
Delay inwater fill
Filling is delayed for 2 to 3 minutes to check for load unbalance.
You will hear the hum of the spin prior to filling. This is normal
operation.
10
CLEANING YOUR DISPENSER TRAY
f TRANSPORTING YOUR WASHER
You may find laundry product residue leftover in your
dispenser trays. To remove residue, follow this
recommended cleaning procedure:
1. Pull tray out until you feel resistance.
2. Lift up slightly, and then continue pulling out.
3. Wash in warm, soapy water, using a mild detergent.
4. Rinse with warm water.
5. Air dry, or dry wtih a towel, then place back into slot.
iMPORTANT: Dispenser trays are not dishwasher safe.
NON=USE AND VACATION CARE
Operate your washer only when you are home.
If moving, or not using your washer for a period of time,
follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid flooding due
to water pressure surge.
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect drain from drain system and drain any
remaining water into a pan or bucket. Disconnect drain
hose from back of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer basket.
6. Drape power cord over edge and into washer basket.
7. Place packing tray from original shipping materials
back inside washer. If you do not have packing tray,
place heaw blankets or towels into basket opening.
Close lid and place tape over lid and down front of
washer. Keep lid taped until washer is placed in
new location.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WINTER STORAGE CARE
iMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets; disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L)of R.V.-type antifreeze in basket and run
washer on RINSE AND SPIN cycle for about 30 seconds
to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
r
RE! NSTALLING/USI NG WASHER AGAI N
To reinstall washer after non-use, vacation, winter storage,
or moving:
1=
Refer to Installation Instructions to locate, level, and
connect washer.
2.
Before using again, run washer through the following
recommended procedure:
To
use washer again:
1.
Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2.
Plug in washer or reconnect power.
3.
Run washer through BULKY ITEMS cycle to clean
washer and remove antifreeze, if used. Use only HE
High Efficiency detergent. Use half the manufacturer's
recommended amount for a medium-size load.
11
TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.whirlpool.com/help "_
for assistance and to possibly avoid a service call.
Check the following for Feet may not be in contact with the Front and rear feet must be in firm contact with floor, and washer
proper installation or see floor and locked, must be level to operate properly. Jam nuts must be tight
"Using Your Washer" against the bottom of the cabinet.
section. Washer may not be level. Check floor for flexing or sagging. Ifflooring is uneven, a 3/4"
(19 mm) piece of plywood under your washer will reduce sound.
See "Level the Washer" in Installation Instructions.
Load could be unbalanced.
Clicking or metallic
noises
Gurgling or humming Washer may be It is normal to hear the pump making a continuous humming sound
Humming The sensing light is on. You may hear the hum of the sensing spins after you have started
Check the following for Washer not level. Water may splash off basket if washer is not level.
proper installation: Fill hoses not attached tightly. Tighten fill-hose connection.
Objects caught in washer
drain system.
draining water, with periodic gurgling or surging asfinal amounts of water are
Load dry items in loose heaps evenly around basket wall.
Adding wet items to washer or adding more water to basket
could unbalance washer.
Wash smaller loads to reduce imbalance.
Use Bulky Item cycle for oversized, non-absorbent items such as
comforters or poly-filled jackets.
See "Cycle Guide" and "Using Your Washer" in this Use and
Care Guide.
Empty pockets before washing. Loose items such as coins
could fall between basket and tub or may block pump.
It may be necessary to call for service to remove items.
It is normal to hear metal items on clothing such as metal snaps,
buckles, or zippers touch against the stainless steel basket.
removed during the spin/drain cycles.
the washer. This is normal. Sensing spins will take several minutes
before water is added to the washer.
Fill hose washers. Make sure all four fill hose flat washers are properly seated.
Drain hose connection. Pull drain hose from washer cabinet and properly secure it to
Check household plumbing for leaks Water can backup out of a clogged sink or drainpipe. Check all
or clogged sink or drain, household plumbing for leaks (laundry tubs, drain pipe, water
Washer not loaded properly.
Not enough water
in washer
Load not completely covered
in water.
12
drainpipe or laundry tub.
pipes, and faucets.)
Unbalanced loading can cause basket to be out of alignment
and cause water to splash off tub. See "Using Your Washer"
for loading instructions.
This is normal operation for an HE low-water washer. The load will
not be completely underwater. The washer senses load sizes and
adds correct amount of water for optimal cleaning. See "What's
New under the Lid."
IMPORTANT: Do not add more water to washer. The added water
lifts the load off the washplate, resulting in less cleaning.
J
Loading...