Whirlpool BREMEN 1300 INSTRUCTION FOR USE

40105227GB.fm Page 1 Monday, January 10, 2005 11:54 AM

GB BREMEN 1300 PROGRAMME CHART

This washing machine is equipped

automatic safety functions

diagnose faults at an early stage and react appropriately, e.g.:

A. “Pump” indicator B. “Water Tap” indicator

Check your washing machine's water supply.

Programme

Cotton-Colours

Coton-Couleurs Bonte-Kookwas

Synthetics

Synthétiques

Synthetisch

Daily mixed

Quotidien

Dagelijks

Rapid wash

Express

Expres

Delicate

Délicat

Fijne was

Wool

Laine

Wol

Handwash

Lav. à main

Handwas

Rinse + Spin

Rinçage + Essorage

Spoelen + Centrifugeren

Spin

Essorage

Centrifugeren

Short spin

Essorage court

Kort Centrifugeren

Drain

Vidange

Afpompen

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

with

which detect and

Care

Labels

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally soiled blouses, shirts and other outer clothing made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetic fibres.

Hardly worn outer and sports clothing made of cotton, polyester, polyamid and mixed cotton fabrics.

Curtains and delicate dresses, skirts, shirts and blouses.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Textiles made of linen, silk, wool or viscose marked as “handwashable”.

Type of wash /

Degree of soiling

–– –– ––

––

Max.

Detergent and Additives

load

Softener Main

5.0

❉

2.5

❉

3.0

❉

3.0

❉

1.5

❉

1.0

❉

1.0

❉

5.0

❉

5.0

–––

1.5

–––

5.0

–––

Yes

Pre-

wash

❉❉ ❉ ❉ ❉ ❉ ❉

– –

❉❉

– –

wash

––

Selectable Special Options =

Start

Delay

Départ Différé

Start

Selectie

Easy

Ironing

Repassage

facile

Gemakkelijk

strijken

❉❉

❉

–– –

❉

–– –– –– –––– ––––

–––––––

Prélavage

Voorwas

F G

Pre-

wash

–

❉

Intensive

Rinse

Rinçage Intensif

Intensief

Spoelen

Rinse

hold

Arrêt

Cuve Pleine

Spoelstop

Speed

reduction

Essorage

Centrifugeren

❉❉ ❉

– – – –

❉❉

❉❉ ❉

❉

{

Tem pe -

rature

30-40-60 1000

40 a n d 6 0 1300

C. “Door Locked” indicator

As long as a washing programme is running, the lamp lights up to show that the door cannot be opened.

D. “Start” button E. Program Sequence Indicator

F. “Spin Speed Reduction” button G. “Reset” button H.Selectable programmes

Max.

Spin

speed

Notes

°C rpm

30-40 60-95

30 1300

30-40 1000

cold

30-40

30 400

20 1300

– –

“Prewash” can be additionally selected for

1300

heavily soiled laundry at any temperature.

“Prewash” can be additionally selected for

heavily soiled laundry.

In this programme the spin speed should be adapted to the fabrics.

–

If you select “Rinse Hold” do not leave items to

1000

soak for too long. If you select “Rinse Hold” do not leave items to

soak for too long. A very gentle spin is used in this programme.

Same as the spin cycle in the “Cotton-Colours” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton-Colours”

1300

programme. A very gentle spin is used in this programme.

Same as the spin cycle in the “Wool”

1000

programme. This programme only drains (alternative

method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.

–

5019 401 05227

Black process 45.0° 100.0 LPI

40105227GB.fm Page 2 Monday, January 10, 2005 11:54 AM

CONSUMPTION DA TA

Programme Temp e ratu r e

Cotton-Colours Cotton-Colours Cotton-Colours

Synthetics Synthetics

Daily Mixed

Rapid wash

Delicate

Wool

Handwash

*The

consumption values

** The

programme duration

household conditions and to adapt the programme run time accordingly.

*** To reduce the

the water out.

water temperature

Wash

(°C)

(kg)

95 5.0 46*** 1.90 2:00 60 5.0 42 0.95 2:10 40 5.0 42 0.60 2:10 60 2.5 55*** 0.80 1:35 40 2.5 50 0.50 1:20 40 3.0 44 0.45 1:00 30 3.0 35 0.30 0:30 40 1.5 55 0.60 0:45 40 1.0 55 0.60 0:40 30 1.0 40 0.30 0:35

were measured in normalized conditions in compliance with Standard IEC/EN 60456.

may also vary from the chart values. The washing machine is able to allow for particular

, some cold water is added at the end of the main wash cycle, before the pump drains

POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME

Add the detergent as described in the chapter “Detergent and Additives” in the instructions for use.

1. Turn the

programme selector knob

to the

desired programme and temperature.

2. The

remaining time display

shows the duration of the chosen programme (in hours and minutes), and the lamp over the “Start” button flashes.

3. The

programme sequence indicator

and the predefined spin speed indication corresponding to the selected programme lights up.

SELECT SPECIAL OPTIONS - The corresponding lights go on (if not selectable: rapid flashing for 3 seconds)

“Easy Ironing” button

• To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme.

• Cannot be activated together with option “Intensive Rinse”

“Prewash” button

• Only for heavily soiled laundry (e.g. sand or granular dirt). Programme duration is increased by some 15 min.

Water

Energy

Programme duration

approx.**

(l)

(kWh)

(hours : minutes)

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with detergent allergies.

• Cannot be activated together with option “Easy Ironing”

“Rinse Hold” button

• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.

• This option is particularly recommended for the programme “Synthetics” or “Delicate”.

• This function is particularly useful if you want to postpone spinning to a later time.

The programme has reached the “Rinse

Note:

Hold” when the corresponding light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the appropriate spin cycle for the current programme.

• If you do not wish to spin the clothes, turn the programme selector knob to “Drain” and press the “

” button again.

Start

“Spin Speed Reduction” button

• A maximum spin speed is assigned to each programme.

• Press the button to set another speed for the spin cycle.

• If no light goes on, the final spin is cancelled. The water is only drained out.

START DELAY

With the “Start Delay” function the appliance can be run cheaply e.g. at night, when the electricity is cheaper.

• Press the “Start Delay” button. Select the programme start from 1 to 24 hours ahead by pressing the button again.

• Press the

“Start”

button. The Start Delay indicator light flashes until the programme starts.

“Start Delay” correction.

• Before “Start” has been pressed: The preset number of hours can be altered by continuously pressing the “Start Delay” button. By pressing the Start Delay button again after the “24” setting, the time delay can be deleted again or set again. After “Start” has been pressed: The preset number of hours can be reduced by pressing the “Start Delay” button again; please note, however, that the washing programme starts IMMEDIATELY, as soon as you operate it again with the Start Delay switch 24 setting. To decrease the number of hours preselected, first turn the programme selector switch to the

position. Then set the programme and the

“O”

additional options again and select the desired number of hours.

PROGRAMME START

After you have selected the programme and the additional option, the indicator light over the

“Start”

the programme by pressing the

button flashes. Turn on the tap and start

“Start”

button. Now the indicator light above the button goes on. In addition, all programme phases are indicated by the associated lights. After the end of a programme phase, the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme, only the “End” indicator is still on.

“DOOR LOCKED” INDICATOR

As long as a washing programme is running, the lamp lights up to show that the door cannot be opened. When the lamp goes off, the door can be opened again. If “

” has been pressed, but the door is not

Start

latched, the “Door Locked” indicator flashes for 10 seconds. The door must be pushed shut within

this time. After the 10 seconds, the “Door Locked” indicator goes out and the “Start” button flashes. The door must then be opened and closed again and the “

” button must be pressed.

Start

“TROUBLE” INDICATORS

“Pump”

Waste water is not pumped out. Check wether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Water Tap”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

PROGRAMME END

• The “End” indicator goes on.

1. Set the programme selector knob to the position.

“O”

2. Turn off the tap.

3. Open the door and unload the machine.

RESELECT AFTER PROGRAMME START

A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.

1. Press the

“Start”

button to interrupt the

programme. The light flashes.

2. Select the new programme (with temperature),

any additional options and - if you wish - another spin speed.

3. Press the

“Start”

button again to restart the

programme.

• If you are in the “Prewash” programme step, this

additional option cannot be deselected as described (to do this see “Reset a Running Programme Before The End”).

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

Press the “Reset” button for at least 2 seconds. Any existing water is drained out before the door can be opened.

5019 401 05227

Black process 45.0° 100.0 LPI