Whirlpool BA 7011 Program table

60105066GB.fm Page 1 Thursday, November 3, 2011 4:47 PM

GB PROGRAMME CHART

H

A. “Door open” indication

This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage and
react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication
D. “Clean pump” indication

Programme

Mixed cold - 60 °C 6.0

Tem pe ra tu re

Care

Labels

C
D

Max.
Load

kg

Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

- Respect the manufacturer’s recommendations on the care label

Type of wash/Notes

}

E

F

A
B

F. “Start (Pause)” button
G. “Spin speed” button

(with “Rinse hold” )

E. Programme selector

I

K

H. Programme sequence indication
I. “Reset/Drain” button
J. “Start delay” button

J

M

}

L

G

Detergents and additives Selectable options Start

Prewas h Main

—

Softener Colours

wash

Yes

15°

❉❉—— — ❉❉ ❉

K. “Temperature” button
L. Child lock button combination
M. “Favourites” button

Rapid Prewash Clean+ Intensive

delay

rinse

Spin

speed

/

Spin

Max.
Spin

Speed

rpm

max.

Cotton cold - 95 °C 7.0

Synthetics cold - 60 °C 3.5

Delicates cold - 40 °C 2.5

Fabr ics

Wool/

Handwash

White cold - 60 °C 7.0

Light colours cold - 60 °C 5.5

Colours

Dark cold - 60 °C 5.0

SuperEco cold - 60 °C 7.0

AquaEco cold - 40 °C 3.0

Eco

Speed 15 cold - 30 °C 3.0

Big Items cold - 60 °C 3.0

Rinse & Spin

Spin

❉: optional / Yes : dosing required

1)

For improved garment care, spin speed is restricted in this programme.

cold - 40 °C 2.0

——

——

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and
linen.

Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc.)
or their blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Woollens, labelled with the Woolmark and identified as machine washable, as well as
textiles made of silk, linen, wool and viscose marked as handwashable.

This programme is tested and approved by The Woolmark Company for machine - and handwashable wool.
Select spin speed according to the manufacturer's recommendations on the care label.

Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach
product, in addition to your detergent.

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if
necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a special
liquid detergent for dark garments with this programme.

Heavily soiled and robust laundry, made of cotton, synthetics and their blends.

Economical energy consumption by prolonged washing duration - Ideal to be run overnight to
profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed
to “0” and start spin programme in the morning, or by defining programme start with “Start delay”
accordingly. For garments with a high share of synthetic fibres, we recommend to use a laundry net.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with a very low water consumption. Use liquid detergent and the lowest
recommended amount for 3kg laundry. Do not use softener.

Briefly worn clothing made of cotton, artificial fibres and blends with cotton.

Refresh programme. Use lowest recommended detergent amount.

Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other
artificial fibres; sleeping bags, bathmats and similar items.

Rinse and intensive spin programme.

7.0

Same as the last rinse and the final spin in the “Cotton” programme.

Intensive spin programme.

7.0

Same as the spin cycle in the “Cotton” programme.

The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702

Yes

❉

❉

❉

—

—

❉

❉

—

—

—

❉

❉❉❉❉❉ ❉❉ ❉

Yes

❉❉❉❉❉ ❉❉ ❉

Yes

❉❉— ❉ ——❉❉

Yes

❉❉—— — — ❉❉

Yes

❉❉—— ❉❉❉❉

Yes

❉❉— ❉❉— ❉❉

Yes

❉❉❉❉— ❉❉ ❉

Yes

❉❉—— — ❉❉ ❉

Yes

— ❉ —— — — ❉❉

Yes

❉❉—— — — ❉❉

Yes

❉❉— ❉ — ❉❉ ❉

—— ❉ ——— — ❉❉ ❉

——— ——— — — ❉❉

Miostar is a registered trademark

5019 601 05066

max.

max.

1000

1000

max.

1000

1000

max.

max.

max.

1000

max.

max.

1)

1)

1)

1)

1)

Black process 45,0° 150,0 LPI

60105066GB.fm Page 2 Thursday, November 3, 2011 4:47 PM

CONSUMPTION DATA

Programme

Mixed 40 6.0 73 0.60 1:00 —
Cotton 95 7.0 74** 2.40 2:10 —
Cotton* 60 7.0 54 0.91 4:00 2:30
Cotton* 60 3.5 41 0.85 3:00
Cotton 40 7.0 69 0.75 3:15 2:15
Cotton* 40 3.5 49 0.60 3:00

Synthetics 60 3.5 46** 0.85 1:55 1:14
Synthetics 40 3.5 42 0.50 1:40 0:59

Delicates 30 2.5 60 0.40 0:45 —

Wool/Handwash 40 2.0 45 0.60 0:40 —

White 40 7.0 69 0.85 2:20 —

Light colours 40 5.5 70 0.50 1:20 —

Dark 40 5.0 45 0.60 1:40 1:15
SuperEco 60 7.0 69 0.84 4:00 —
AquaEco 40 3.0 19 0.45 1:00 —
Speed 15 30 3.0 30 0.20 0:15 —
Big Items 40 3.0 74 0.75 1:30 —

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may var y depending on the individual
water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.
15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of thi s valve to hot water
supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.
Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options
or changing the spin speed will also change the consumpti on data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).

* Reference programmes for Energy Label.
** To reduce the water temperature, some cold water is added at the end of the main wash c ycle before the water is drained.
*** Automatic adaptation of programme duration after detection of wash load.

Tem pe ra tu re

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent as
indicated on the front page and as described in the chapter
“Detergent and Additives” in your Instructions for Use.

1. Turn the programme selector to the desired programme.
The display shows the programme duration in hours and
minutes as well as the predefined temperature. The “Start
(Pause)” button blinks.

2. The temperature can be altered by pressing the
“Temperature” button.

3. The indication lamp of the predefined spin speed lights up.
In case you want to set another spin speed, press the “Spin
speed” button .

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication
lights up.
When the combination of programme and option is not possible,
the light switches off automatically. Unsuitable combinations of
options are deselected automatically.

“Colours 15°” button

• Saves energy used for water heating while maintaining a

good wash result.

• Supports colour maintenance when washing coloured laundry.

• Recommendable for lightly soiled laundry without stains.

• Use special cold wash detergents with this option to enable a

good wash result.

• Not selectable for Cotton 70 - 95°C.

“Rapid” button

• Enables quicker washing by shortening the programme duration.

Load

(kg)

Wate r

(l)

Energy

(kWh)

• Recommendable for only lightly soiled laundry.

• Not selectable for Cotton 70 - 95°C.

“Prewash” button

• Adds a prewash cycle to the wash programme selected;

• Recommended for heavily soiled laundry (e.g. containing

• Do not use liquid detergent for the main wash when

“Cle an +” b utton

• Choose this option if you use an in-wash additive for stain

• Use with maximum load.

• Add an appropriate amount of in-wash additive for stain

• May prolong the programme by up to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Spin speed” button (incl. “Rinse hold” )

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is cancelled,

Approx. Programme Duration (hours : minutes)

without “Rapid” with “Rapid”

***

***

prolongs the programme by about a quarter of an hour.

sand or granular dirt).

activating the Prewash option.

removal (powder, for example “Vanish”) - it will optimize the
additive’s efficiency to get better wash performance and
stain removal.

removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this o ption).
Respect the manufacturer’s dosing instructions.

basis. Chlorine or perborate bleaches must not be used!

water, washing baby linen and helping people with allergies.

and the water is drained out only. However, intermediate
spin phases remain during rinse.

•If you select “Rin se hold” , the laundry remains in the
last rinse water without progressing to the final spin cycle to
avoid creasing and prevent colours from changing.

- Select “Rinse hold” if you want to postpone spinning to

a later time or if you want to drain only.

- The programme stops to “Rinse hold” when the “Rinse

hold” light in the programme sequence indicator is
on. The “Start (Pause)” button light blinks.

- To terminate the “Rinse hold” by draining the water, without

any spinning, press the “Start (Pause)” button .

- To terminate the programme by spinning the laundry, press

the “Spin speed” button to select the desired spin speed and
then the “Start (Pause)” button to start the spin cycle.

- Do not leave the laundry to soak in the rinse hold for too

long.

START DELAY

The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select a delay time up to 23
hours. The light of the “Start (Pause)” button blinks.

• Press the “Start (Pause)” button . The countdown of the
delay time begins. The light of the “Start (Pause)” button

is on. The light of the start delay button will keep

blinking until the programme starts.

• As soon as the programme starts, the start delay on the
display is replaced by the remaining programme time, and
the light of the “Start delay” button goes off.

• Once having pressed the “Start (Pause)” button , the
number of hours preselected can be changed by pressing
and holding the “Start delay” button.

To cancel the “Start delay”
...before you press “Start (Pause)” :

• Turn the programme selector to another position, or briefly
press the “Reset/Drain” button .

...after having pressed “Start (Pause)” :

• Press “Start (Pause)” - the delay time disappears from
the display. Press “Start (Pause)” again to start the
selected programme immediately.

PROGRAMME START

Open the tap and press “Star t (Pause)” . The light stops
blinking and is on. The programme sequence indicator shows
the current programme phase, running from left to right through
Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is
the case, an animation appears on the display.

CHILD LOCK

Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or
run a programme as usual.

• Press the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds. A key-like symb ol will
shortly appear on the display to indicate that the child lock is
active.

Any time you try to change a programme setting with active child
lock, the display will briefly show the key-like symbol. The
programme setting cannot be changed anymore. The only change
possible is to switch the washer off by turning the programme
selector to the “Off/O” position. To deactivate the child lock:

• Press again the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and
option(s), push and hold the “Favourites” button for at
least 3 seconds. The “Favourites” indication briefly
blinks and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting,
select the programme, briefly push the “Favourites” button
and start by pushing “Start (Pause)” .
If you want to replace the saved programme setting by another
one, proceed as already described above.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to
show that t he doo r can be opene d. As lo ng as a wash pr ogram me is
running, the door remains locked and mu st on n o a cc oun t b e fo rc ed
open. In case you have an urgent need to open it during a running
programme, refer to “Reset a running programme before the end”.

FAILURE INDICATIONS

If one of the failure indications lights up, refer to the
“Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

• The display shows “End” and the “Door open” indication

lights.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press “Start (Pause)” to pause the programme. The

light blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press “Start (Pause)” again. The light is on, and the

programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE
END

The “Reset/Drain” button cancels a programme before
the end.

• Press the “Reset/Drain” button for at least 3

seconds. “rES” appears on the display. The water is drained
out; it may last a while until you can open the door.

Miostar is a registered trademark

5019 601 05066

Black process 45,0° 150,0 LPI