Whirlpool B2lDK User Manual

Use And Care
A Note To You Important Safety
Instnjctions
Parts And Features Before Using Your
Refrigerator Using Your
Refrigerator Caring For Your
Refrigerator Food Storage Guide 20
If You Need Assistance Or Service
Warranty
1-800-253-1301
Call ut with quastiora or comments.
NO-FROST REFRIGERATOR-FREEZER
a
MODEL EB21DK
17
22
24

A NOTE TO YOU

A Note To You

Thank you for buying a Whirlpool* appliance.

You have purchased a quality, world-class home appliance. Years of engineering experience went into its manufacturing. To ensure that you enjoy many years of trouble-free operation, we developed this Use artd Care Guide. It is full of valuable information on how to operate and maintain your appliance properly arKi safely. Please read it carefully. Also, please com plete and mail the Ownership Registration Card provided with your appliarx:e. This will help us notify you about any new information on your appliance.

Your safety Is Important to us.

This guide contains safety symbols and statements. Please pay special attention to these symbols and follow any instructions given. Here is a brief explanation of the use of each symbol.
Awarning Acaution
This symbol will help alert you to such dangers as personal injury, bums, fire arKi electrical shock.
This symbol will help you avoid actions which could cause product damage (scratches, dents, etc.) and damage to your personal property.
Our Consumer Assistance Center number, 1-800-253-1301, Is toll-free, 24 hours a day.
If you ever have a question concerning your appliance’s operation, or if you need service, first see “If You Need Assistance Or Service” on page 22. If you need further help, feel free to call our Consumer Assistance Center. When calling, you will need to know your appliance’s complete trx>del number and serial number. You can find this information on the model and serial number label (see diagram on page 4). For your convenience, we have included a
handy place below for you to record these numbers, the purchase date from the sales slip and your dealer's name and telephone number. Keep this book and the sales slip together in a safe place for future reference.
Model Number Serial Number
Purchase Date
Dealer Name . Dealer Phone

IMPORTANT SAFETY INSTRUCTIONS

Important Safety Instructions

À WARNING
> Read all instructions before using the
refrigerator.
> Child entrapment and suffocation are
not problems of the past. Junked or abandoned refrigerators are still danger ous ... even if they will “just sit in the garage a few days.”
If you are getting rid of your old refrig
erator, do it safely. Please read the enclosed safety booklet from the Asso ciation of Home Appliance Manufactur ers. Help prevent accidents.
To reduce the risk of fire, eiectricai shock, or injury when
using your refrigerator, foiiow these basic precautions:
- SAVE THESE INSTRUCTIONS -

Help us help you

Please:
• Install and level the refrigerator on a floor
that will hold the weight and in an area suitable for its size and use.
• Do not install the refrigerator near an oven,
radiator or other heat source.
• Do not use the refrigerator in an area
where the room temperature will fall below 55“F (13“C).
• Keep the refrigerator out of the weather.
• Connect the refrigerator only to the proper
kind of outlet, with the oon’ect electrical supply and grounding. (Refer to the
Electrical Requirements arid Grounding Instructions Sheet.)
• Do not load the refrigerator with food
before it has time to get properly cold.
• Use the refrigerator only for the uses
described in this manual.
• Properly maintain the refrigerator.
• Be sure the refrigerator is not used by
anyone unable to operate it properly.
• Never allow children to operate, play with,
or crawl inside the refrigerator.
• Never clean refrigerator parts with flammable fluids. The fumes can create a fire hazard or explosion.
• FOR YOUR SAFETY •
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THE FUMES CAN CREATE A FIRE HAZARD OR
EXPLOSION.

PARTS AND FEATURES

Parts And Features

This section contains captioned illustrations of your Etppliance. Use them to become familiar with where all parts and features are located and what they look like.
Adjustable Spillguard”* shelves'
Meat drawer Lateral adjust
Spillguard^" glass sheH
Crisper cover
Humidity­controlled crispers
Ice cube
trays
Ice bin Slide-out
freezer baskets
Control
panel
r-\— ,
r -a-
Jil:—
Light
3
Utility
compartment
Butter
compartment
U
bI /
- i
t
Adjustable
door bins
Tail-bottle
retainer
Bin glides
Deep
adjustable
door bins
Model and
serial number
label (on side
wall)
SheK glide
Base grille
Leveling rollers (behind base grille)
Control panel
Refrigerator
controi
Exterior moisture
control
Freezer control

BEFORE USING YOUR REFRIGERATOR

Before Using Your Refrigerator
In This Section

Cleaning it

Plugging it in

It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
....................................
...............................
.....................5
.....................5
Page
Installing it properly
Leveling it
....................................
.................
Cleaning it

Removing packaging materiais

Remove tape and any inside labels (except the model and serial number label) before using the refrigerator.
To remove any remaining giue:
• Rub briskly with your thumb to make a ball,
then remove.
OR
• Soak area with liquid hand-dishwashing
detergent before removing glue as de scribed above. Do not use sharp instru ments, rubbing alcohol, flammable fluids or abrasive cleaners. These can damage the material. See “Important Safety Instruc tions” on page 3.
NOTE: Do not remove any permanent instruction labels inside your refrigerator. Do not remove the Tech Sheet fastened under the refrigerator at the front.

Cleaning it before use

After removing all packaging materials, clean your refrigerator before using it, if necessary. See cleaning instructions on pages 17 and 18.
Page
.....................6
.....................6
Plugging it in
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused and properly grounded electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.
See Electrical Requirements and Ground
ing Instructions Sheet in your Literature Package.
3-prong grounding type wall receptacle
Refrigerator power cord
3-prong grounding plug
BEFORE USING YOUR REFRIGERATOR

Installing it properiy

1. Allow inch (1.25 cm) space on each
side and at the top of the refrigerator for ease of installation.
2. If the hinge side of the refrigerator is to be
against a wall, you might want to leave extra space so the door can be opened wider.
3. The refrigerator can be flush against the
back wall.

Leveiing it

Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below.
1. Remove base grille. (See page 15.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock
wise.
4. Check with level.
5. Replace base grille. (See page 15.)
---
1
□ □
I 1 11 n
Right to raise;

USING YOUR REFRIGERATOR

Using Your Refrigerator
In This Section
Page
Setting the controls Changing the control settings Adjusting the door bins Adjusting the bln/shelf glides Removing the tail-bottle retainer
Adjusting the lateral-adjust shelf ....10
Adjusting the cantilever
refrigerator shelves....................................11
Using the egg bin Removing the meat drawer and
cover................................................................12
Removing the crispers and
crisper cover.................................................12
To obtain the best possible results from your refrigerator, it is important that you operate it properly. This section tells you how to set the controls, remove and adjust some of the features in your refrigerator, and how to save energy.
......................................
...................
...............................
....................
..............
.......................................
11
7
Adjusting the crisper humidity control
8
Removing the freezer baskets..................13
9
Using the ice cube trays
9
Using the optional automatic
9
ice maker........................................................14
Changing the light bulbs...........................15
Removing the base grille Reversing the door swing Understanding the sounds you
may hear.........................................................16
Saving energy...............................................16
..........................................
...........................
..........................
........................
Page
13
13
15 16

Setting the controls

Temperature controls
Controls for the refrigerator and freezer are in the refrigerator. When you plug in the refriger ator for the first time:
1. Set the Refrigerator Control to 3.
Refrigerator Control adjustments range from 1 (warmest) to 5 (coldest).
2. Set the Freezer Control to B.
Freezer Control adjustments range from
A (coldest) to C (warmest).
3. Give the refrigerator time to cool down completely
before adding food. This may take several hours.
The settings indicated above should be correct for normal, household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. If you
need to adjust these settings, see “Changing the control settings” on page 8.
COLDEST S
;q/
REFRIGERATOR
A WARMER
FREEZER

USING YOUR REFRIGERATOR

Exterior moisture control

The Exterior Moisture Control operates electric heaters around the door openings. These heaters help keep moisture from
forming on the outside of the refrigerator
cabinet.
• Use the OFF setting when humidity is low.
• Use the ON setting if moisture forms on
the outside of the refrigerator cabinet.

Changing the control settings

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have
questions, call our Consumer Assistance
Center number, 1-800-253-1301.
CONDITION: Refrigerator
section too warm
Freezer section too warm
Refrigerator section
too cold
REASON:
• Door opened often Refrigerator 4
• Large amount of food added
• Room temperature too wann
• Door opened often
• Large amount of food added
• Very cold room temperature
(can’t cycle often enough)
• Controls not set correctly for your conditions
EXTERIOR MOISTURE
CONTROL
• Adjust the Refrigerator Control first.
• Wait at least 24 hours between adjust ments.
• Then adjust the Freezer Control if needed.
RECOMMENDED CONTROL SETTINGS:
Freezer B
Refrigerator 3
Freezer
Refrigerator 2
Freezer
Between B and C
B
Ice not made fast
enough Both
sections too warm
• Heavy ice usage
• Very cold room temperature (can’t cycle often enough)
• Door opened often
• Large amount of food added
• Very warm or very cold room temperatures
Refrigerator
Freezer
Refrigerator 4
Freezer
Between B and C
Between B and C
3
USING YOUR REFRIGERATOR

Adjusting the door bins

To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.

Adjusting the biiVshelf glides

Use the bin/shelf glides to secure odd shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along bin/track. NOTE: Shelf glides cannot be removed.
Removing the tail-bottle retainer
The tail-bottle retainer fits onto any door bin
in your refrigerator. The retainer helps hold
tall bottles in place when opening and closing the refrigerator door.
To remove tail-bottle retainer:
1. Grasp center of retainer.
2. Pull up and off of bin.
To replace tail-bottle retainer:
1. Position retainer above desired door bin.
2. Gently push retainer down onto bin.
3. Make sure both side notches sit firmly
against bin.
t
Notch
USING YOUR REFRIGERATOR

Adjusting the lateral-adjust shelf

To slide shelf side-to-side:
1. Lift slightly on shelf front.
2. Slide to desired location.
3. Lower shelf front to level position.
NOTE: You do not have to remove small Kerns from the shelf before moving K side-to-
side. You may need to rennove larger Kerns.
To remove the shelf:
1. Remove all Kerns from the shelf.
2. Hold back of shelf wKh one hand.
3. Lift front of sheK to 45° angle.
4. Lower shelf slightly to release shelf from
upper channel of track. Then pull shelf straight out.
Lift front slightly.
Then slide to new location.
NOTE: SheK is heavy. Make sure you use
both hards when removing sheK.
To remove shelf track:
1. Lift both sides of track slightly.
2. Pull track straight out.
To replace shelf track:
1. Guide track hooks into the sheK support slots on the back wall of the cabinet.
NOTE: Make sure all three track hooks
are in slots and that the slots are parallel to each other.
2. Push track backward and down.
3. Check that track is completely seated in
the sheK supports.
Hold wKh both hands and lift front to 45° angle.
Hold both sides and lift up and out.
SheK
• support
10
USING YOUR REFRIGERATOR
To reinstall shelf:
1. Hold shelf at front and back.
2. Tilt front of shelf up to a 45° angle to
track.
3. Insert both rear shelf slides into upper
channel of track.
4. Lower front of shelf to a level position. NOTE: Make sure both rear shelf slides are
securely in the track before letting go of shelf.
Insert rear shelf slides into upper channel of track.
Upper channel

Adjusting the cantilever refrigerator shelves

Adjust the shelves to match the way you use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy
food items.
To remove glass shelves:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift back of shelf.
4. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear shelf hooks into the slots
in the shelf supports on cabinet wall.
2. Tilt shelf up at front until hooks drop into
slots. Lower front of shelf to level position.
Glass shelves are heavy. Be careful.
of track

Using the egg bin

The egg bin has three pieces - the lid, the
egg carrier, and the bin. Use the egg bin to hold one, two or three dozen eggs.
To hold one dozen eggs:
Place a dozen eggs into the egg carrier. Then place the egg carrier into the bin arKi cover with the lid.
To hold two dozen eggs:
Place two dozen eggs loose in the bin and cover them with the lid. Use the carrier to transport eggs between the bin and your cooking area.
To hold three dozen eggs:
Place two dozen eggs loose in the bin.
Invert the lid and place it on the bin. Place a dozen eggs, in the carton, on top of the lid.
Use the carrier to transport eggs between the bin arxl your cooking area.
USING YOUR REFRIGERATOR

Removing the meat drawer and cover

To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift front of meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
4. Replace cover in reverse order.
Pull out to the stop, lift the front and pull
again,

Removing the crispers and crisper cover

To remove the crispers:
1. Slide the crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
Pull out to the
stop, lift the front
and pull again.
To remove the cover:
1. Push up glass insert from the bottom,
then slide it out with both hands.
2. Lift front of cover frame.
3. Pull cover frame up and out.
4. Remove metal cover support.
To replace the cover:
1. Replace metal cover support on wall
supports in front section of cabinet.
2. Fit back corners of cover frame into notch
supports on walls of refrigerator, then lower front onto metal cover support.
3. Slide back of glass insert into cover
frame. Then lower front to level position.
12
Remove the glass Insert Lift front of cover frame, then the back.
USING YOUR REFRIGERATOR
Adjusting the crisper humidity control
You can control the amount of humidity in
the nx>isture-sealed crisper.
• Adjust the control to any setting between
LOW and HIGH.
• LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
• HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.

Removing the freezer baskets

Remove the freezer baskets for easier
cieaning.
To remove the baskets:
1. Slide basket out to the stop.
2. Lift basket front slightly.
3. Slide basket out the rest of the way.
To replace the baskets:
1. Piace basket on slides in liner wali.
2. Make sure the wire stops on basket ciear
the front of the slides.
3. Slide basket in all of the way.

Using the ice cube trays

If you don’t use cubes, they may shrink. The
moving cold air starts a slow evaporation. The longer you store cubes, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
13
USING YOUR REFRIGERATOR

Using the optional automatic ice maker

If you have an automatic ice maker, or if you plan to add one later (contact dealer for ice maker kit number), there are a few things you will want to know:
• The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically. UP to shut off the ice maker.
IMPORTANT: Do not turn ice maker on until it is connected to the water supply. Instructions for Ice maker water supply hookup are attached to the back of the refrigerator cabinet.
• The dial or lever on the side of the ice
maker changes the size of the cubes.
• Good water quality is important for good
ice quality. Try to avoid connecting the ice maker to a softened water supply. Water
softener chemicals, such as salt from a
malfunctioning softener, can damage the
ice maker rrwid and lead to poor ice quality. If you cannot avoid a softened water supply, make sure that the water softener is well maintained and operating properly.
Raise signal arm to stop ice.
Lower
signal arm to start it.

Solving common ice maker problems

PROBLEM Ice crescents attached
at corners Ice maker will not
operate or Ice Is not
made fast enough
Off-taste or odor in ice
14
POSSIBLE CAUSE/SOLUTION
• This is normal. They break apart easily. Shake bin occasion ally to keep cubes separated.
’ ON/OFF lever is in the OFF (up) position. Lower lever to the
ON (down) position.
' Freezer is not cold enough. Adjust temperature controls and
wait 24 hours. (See “Ohanging the control settings” on page 8.)
> New plumbing connections can cause discolored or off-
flavored ice. Discard the first few batches of ice.
• Cubes are stored too long. Throw them away and make a
new supply.
' Foods in freezer are not wrapped properly. See “Food
Storage Guide” on pages 20 and 21.
' Freezer and ice bin need to be cleaned. See pages 17
and 18.

Changing the light bulbs

^WARNING
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply.
Failure to do so could result in electrical
shock or personal injury.
To change the refrigerator light:
1. Disconnect refrigerator from power supply.
2. Push lightly on top center of light shield until the
notched tabs unhook from the Control Panel.
3. Pull light shield down until the tabs clear the
Control Panel.
4. Lift back hooks of light shield out of their slots.
5. Replace with a 40-watt appliance bulb.
6. Replace light shield.
7. Reconnect refrigerator to power supply.
To change the freezer light bulb:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until they snap free.
3. Replace with a 40-watt appliance bulb.
4. Snap light shield into place.
5. Reconnect refrigerator to power supply.
USING YOUR REFRIGERATOR
w
NOTE: Not all commercial appliance bulbs will fit
your refrigerator. Be sure to replace a bulb with
one of the same size and shape.

Removing the base grille

To remove the grille:
1. Open refrigerator door.
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door. See cleaning instructions for defrost pan and
condenser coils on page 18.
Condenser coils
— Defrost pan Base
' Support tabs grille
15
USING YOUR REFRIGERATOR

Reversing the door swing

You can change the hinges on your refrig erator so the doors open the other way.
Refer to the instruction sheet included with
your refrigerator.

Understanding the sounds you may hear

Your new refrigerator may make sounds that your old one didn’t. Because the sounds are
new to you, you might be concerned about
them. Don’t be. Most of the new sounds are
normal. Hard surfaces like the floor, walls
and cabinets can make the sounds seem
louder.
The following describes the kinds of
sounds that might be new to you, and what
may be making them.

Slight hum, soft hiss

You may hear the refrigerator’s fan motor
and moving air.

Clicking or snapping sounds

The thermostat makes a definite click when the refrigerator stops running. It also makes
a sound when the refrigerator starts. The defrost timer will click when the defrost cycle starts.

Water sounds

When the refrigerator stops running, you may hear gurgling in the tubing for a few minutes after it stops. You may also hear defrost water running into the defrost water pan.

Ice maker sounds

• trickling water
• thud (clatter of ice) If your refrigerator has an ice maker, you
may hear buzzing (from the water valve), tricMing water and the clatter of ice dumped into the bin.

Running sounds

Your refrigerator has a high-efficiency compressor and motor. It will run longer than older designs. It may even seem to run most of the time.

Saving energy

You can help your refrigerator use less electricity.
• Check door gaskets for a tight seal. Level
the cabinet to be sure of a good seal.
• Clean the condenser coils regularly.
• Open the door as few times as possible. Think about what you need before you open the door. Get everything out at one time. Keep food organized so you won’t have to search for what you want. Close door as soon as food is removed.
16
• Go ahead arud fill up the refrigerator, but don’t overcrowd it so air movement is blocked.
• It is a waste of electricity to set the refrig erator and freezer to temperatures colder than they need to be. If ice cream is firm in the freezer and drinks are as cold as your family likes them, that’s cold enough.
• Make sure your refrigerator is rK>t next to a heat source such as a range, water heater, furnace, radiator or in direct sunlight.

CARING FOR YOUR REFRIGERATOR

Caring For Your Refrigerator
In This Section
Page

Cleaning your refrigerator

Vacation and moving care
Your refrigerator is built to give you many years of dependable service. However, there are a
few things you can do to extend Ks product life. This section tells you how to clean your
refrigerator arKi what to do when going on vacation, moving or during a power outage.
Cleaning your refrigerator
Both the refrigerator and freezer sections defrost automatically. However, clean both about once a month to prevent odors from building up. Wipe up spills right away.
To clean your refrigerator, turn the Refrig
erator Control to OFF, unplug it, take out all removable parts and clean the refrigerator
according to the following directions.
................
................
..........
.................
18
^WARNING
Personal Injury Hazard
Refrigeration system tubes are located near the defrost pan and can become hot. Remove and install defrost pan carefully.
Failure to do so could result in personal injury.
Page
19
PART Removable parts
(shelves, crisper,
etc.) Outside
Inside walls (allow freezer to warm up so cloth won’t stick)
WHAT TO USE Sponge or cloth with mild
detergent and warm water
Sponge, cloth or paper towel with mild detergent, warm water and an appliance wax (or good auto paste wax)
Sponge, soft cloth or paper towel with baking soda or mild detergent and warm water
HOWTO CLEAN
• Hand wash, rinse and dry thoroughly.
• Wash outside of cabinet. Do rnst
use abrasive or harsh cleaners.
• Rinse and dry thoroughly.
• Wax painted metal surfaces at least twice a year. Apply wax with a clean, soft cloth. Waxing painted
metal surfaces provides rust protection. Do not wax piastic parts.
• Wash with mixture of warm water and
- mild detergent, or
- baking soda (2 tablespoons
[26 g] to 1 quart [.95 L] of water).
• Rinse and dry thoroughly.
continued on next page
17
CARING FOR YOUR REFRIGERATOR
PART WHAT TO USE HOW TO CLEAN Door liners
and gaskets
Sponge, soft doth or paper towel wKh mild detergent and warm water
• Wash, rinse and dry thoroughly.
DO NOT USE cleaning waxes, concen
trated detergents, bleaches or cleaners containing petroleum on plastic parts.
Plastic parts
(covers and
panels)
Defrost pan
Condenser coils
Floor under refrigerator
Soft, clean sponge or soft, clean cloth with mild detergent and warm water
Sponge or cloth with mild detergent and warm water
Vacuum cleaner with extended narrow attachment
Roor cleaners
• Wash, rinse and dry thoroughly.
DO NOT USE paper toweis, window sprays, scouring cieansers or flammable fluids. These can scratch or damage materiai. See “Important Safety Instruc
tions” on page 3.
• Remove base grille. (See page 15.)
• To remove defrost pan, lift pan over wire
brace (renrx)ve tape; if any).
• Wash, rinse arud dry thoroughly.
• Replace with rratched corner to the rear.
Push it in all the way.
• Make sure defrost pan drain tube is
pointing into pan.
• Replace base grille.
• Remove base grille.
• Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month.
• Replace base grille.
• Roll refrigerator out only as far as the water supply line allows.
• Clean floor.
• Roll refrigerator back into place.
• Check to see if the refrigerator is level.
Vacation and moving care

Short vacations

No need to shut off the refrigerator if you will be away for less than four weeks.
1. Use up any perishables.
2. Freeze other items.
3. If your refrigerator has an automatic ice
maker:
• Raise signal arm to OFF (up) position.
• Shut off water supply to ice maker.
• Empty the ice bin.
18
CARING FOR YOUR REFRIGERATOR

Long vacations

If you will be gone a month or nxire;
1. Remove all food from the refrigerator.
2. If your refrigerator has an automatic ice
maker:
• Turn off the water supply to the ice
maker at least one day ahead of time.
• When the last load of ice drops, turn off
the ice maker. Make sure all ice is dis
pensed out of the ice maker mecha nism.
3. Unplug the refrigerator.
4. Clean it, rinse well and dry.
5. Tape mbber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up.
^WARNING
Personal Injury Hazard
Do not allow children to climb on, play near or climb inside the refrigerator when the doors are blocked open.
They may become injured or trapped.
To restart refrigerator, see “Using Your
Refrigerator^ on page 7.

Moving

When you are moving the refrigerator to a new home:
1. If your refrigerator has an automatic ice
maker:
• Turn off the water supply to the ice
maker at least one day ahead of time.
• Disconnect the water line.
• After the last load of ice drops, lift the
signal arm to the OFF (up) position.
2. Remove all food from the refrigerator.
3. Pack all frozen food in dry ice.
4. Unplug the refrigerator.
5. Clean it thoroughly. Rinse well and dry.
6. Take out all removable parts, wrap them well, and tape them together so they don’t shift arKi rattle.
7. Screw in the leveling rollers.
8. Tape the doors shut and tape the power supply cord to the cabinet.
When you get to your new home, put
everything back and refer to page 5. Also, if your refrigerator has an automatic ice maker, remember to reconnect the water supply line.

Power interruptions

If electricity goes off, call the power com pany. Ask how long power will be off.
1. If service will be interrupted 24 hours or less, keep both doors closed. This helps food stay frozen.
2. If service will be interrupted longer than
24 hours: (a) Remove all frozen food and store in a
frozen food locker.
OR (b) Place 2 lbs. (0.9 kg) of dry ice in
freezer for every cubic foot of freezer space. This will keep food frozen for 2 to 4 days. Wear gloves to protect your hands from dry ice burns.
OR
(c) If neither a food locker or dry ice is
available, use or can perishable food at once.
3. A full freezer stays cold longer than a partly filled one. A freezer full of meat stays cold longer than a freezer full of baked goods. If food contains ice crystals, it may be safely refrozen, although the
quality and flavor may be affected. If the condition of the food is poor, or if you feel it is unsafe, dispose of it.

Questions 7

Call our Consumer Assistance Center
telephone number, 1-800-253-1301.
19

FOOD STORAGE GUIDE

Food Storage Guide
There is a correct way to package arid store refrigerated or frozen food. To keep food fresher, longer, take the time to study these recommended steps.

Storing fresh food

Wrap or store food placed in the refrigerator in airtight and moisture-proof material. This prevents food odor and taste transfer throughout the refrigerator. For dated products, check code date to ensure fresh
ness.

Leafy vegetables

Remove store wrapping and trim or tear off bruised and discolored areas. Wash in cold water and drain. Place in plastic bag or plastic container arKf store in crisper.

Vegetables with skins (carrots, peppers)

Store in crisper, plastic bags or plastic container.

Fruit

Wash, let dry arKf store in refrigerator in plastic bags or crisper. Do not wash or hull berries until they are ready to use. Sort and
keep berries in their original container in a crisper, or store in a loosely closed paper bag on a refrigerator shelf.

Eggs

Store without washing in the egg bin pro vided or in the original carton on an interior shelf.

Milk

Wipe milk cartons. For best storage, place
milk on interior shelf.

Cheese

Store in the original wrapping until you are ready to use it. Once opened, rewrap tightly in plastic wrap or aluminum foil.

Leftovers

Cover leftovers with plastic wrap or alumi num foil. Plastic containers with tight lids can also be used.

Meat

Store most meat in original wrapping as long as it is airtight and moisture-proof. Rewrap if necessary. See the following chart for storage times.
APPROXIMATE TIME
TYPE Chicken Ground beef Steaks arnf roasts 3 to 5 Cured meats
Bacon 5 to 7 Cold cuts 3to5 Variety meats 1 to 2
*lf storing meat longer than the times given,
follow the directions for freezing.
NOTE: Use fresh fish aiKf shellfish the same day as purchased.
(DAYS)*
1 to 2 1 to 2
7 to 10

Butter or margarine

Keep opened butter in covered dish or closed compartment. When storing an extra supply, wrap in freezer packaging and freeze.
20

Storing frozen food

The freezer section is designed for storage of commercially frozen food and for freezing food at home.
NOTE: For further information about prepar ing food for freezing or food storage times, contact your local Cooperative Extension Service or check a freezer guide or reliable cooldxx^k.

Packaging

The secret of successful freezing is in the packaging. The way you close arxl seal the
package must not allow air or moisture in or
out. Packaging done in any other way could cause food odor and taste transfer through
out the refrigerator and drying of frozen
food.
Packaging recommended for use:
• Rigid plastic containers with tight-fitting lids
■ Straight-sided canning/freezing jars
• Heavy-duty aluminum foil
• Plastic-coated paper
• Non-permeable plastic wraps (made from
a saran film)
Follow package or container instructions for
proper freezing methods.
FOOD STORAGE GUIDE

Freezing

Do not expect your freezer to quick-freeze any large quantity of food. Put no more
unfrozen food into the freezer than will freeze within 24 hours (no more than 2 to 3 pounds of food per cubic foot of freezer space). Leave enough space for air to
circulate around packages. Be careful to
leave enough room at the front so the door
can close tightly.
Storage times will vary according to the quality of the food, the type of packaging or wrap used (airtight and moisture-proof) and the storage temperature, which should be 0“F(-17.8°C).

Do not use:

• Bread wrappers
• Non-polyethylene plastic containers
• Containers without tight lids
• Waxed paper
• Waxed-coated freezer wrap
• Thin, semi-permeable wrap The use of these wrappings could cause
food odor, taste transfer and drying of frozen food.
21

IF YOU NEED ASSISTANCE OR SERVICE

If You Need Assistance Or
Service
Performance problems often result from little things you can fix without tools. Please read the
chart below before calling for service on your appliance.

1. Before calling for assistance ...

Listed in this chart are the nx>st common problems consumers run into with their appliances. Please read through this and see if it can solve your problem.
PROBLEM CHECK THE FOLLOWING Your refrigerator
will not operate
Is the power supply cord firmly plugged into a live circuit with proper
voltage?
Has a household fuse or circuit breaker blown/tripped? Is the Refrigerator Control set to the OFF position?
The lights do not
work
The optional ice maker does not
work
You hear unfa miliar souruls or a rattling/jingling noise
There is water in the defrost pan
The motor seems to run too
much
Is the power supply cord firmly plugged into a live circuit with proper
voltage?
Has a household fuse or circuit breaker blown/tripped? Is a bulb burned out? Is the freezer cold enough to make ice? It could take overnight for
the freezer to reach the proper temperature.
Is the ON/OFF lever in the ON (down) position? (See page 14.) Is the water valve turned on? Does the water line have a clog or leak? Is something on top of or behirxf the refrigerator? Some new sounds are rK>rmal. See "UrKierstanding the sounds you
may hear” on page 16.
This is normal on hot, muggy days. Make sure the refrigerator is level
so the pan does not overfbw.
Are the condenser coils dirty?
Has the door been opened often? Has a large amount of food been added at one time? The motor naturally runs longer if these things happen.
Is the room hot? If the room is too warm, the motor runs longer to keep the unK cool.
22
IF YOU NEED ASSISTANCE OR SERVICE

2. If you need assistance* ...

Call Whirlpool Consunner Assistance Center telephone number. Dial toll-free from anywhere in the U.S.A.:
1-800-253-1301
and talk with one of our trained consultants. The consultant can instruct you in how to obtain satisfactory operation from your appliance or, if service is necessary, recom
mend a qualified service company in your area.
If you prefer, write to:
Mr. William Clark Consumer Assistance Representative Whirlpool Corporation 2000 N State Route 63 Benton Harbor, Ml 49022-2692
Please include a daytime phone number in your correspondence.

3. If you need service* ...

Whirlpool has a nationwide network of
authorized Whirlpool* service companies.
Whirlpool service technicians are trained to
fulfill the product warranty and provide after
warranty service, anywhere in the United
States. To locate the authorized Whirlpool
service company in your area, call our
Consumer Assistance Center telephone
number (see Step 2) or look in your tele
phone directory Yellow Pages under:
•APPUANCE4K>USEHOU>-
MAJOfl, SERVICE S REPAIR
- SMt: Whirlpool Appliancos or Authorized Whirlpool Service
(Exmrr^: XYZ Service Co.)
•WASHING MACHINES A DRYERa SERVICE A REPAIR
- See: Whirlpool Appllences or
Authorized Whirlpool Service
{Ex^nph: XYZ Service Co.)
4. If you need FSP* replace ment parts ...
FSP is a registered trademark of Whirlpool Corporation for quality parts. Look for this syrnbol of quality whenever you need a replacement part for your Whirlpool appli ance. FSP replacement parts will fit right and work right, because they are made to the same exacting specifications used to build every new Whirlpool appliance.
To locate FSP replacement parts in your area, refer to Step 3 above or call the Whirlpool Consumer Assistance Center number in Step 2.
5. If you are not satisfied with
how the problem was solved ...
• Contact the Major Appliance Consumer
Action Panel (MACAP). MACAP is a group of independent consumer experts that voices consumer views at the highest
levels of the major appliance industry.
• Contact MACAP only when the dealer,
authorized servicer and Whirlpool have failed to resolve your problem.
Major Appliance Consumer Action Panel 20 North Wacker Drive Chicago, IL 60606
• MACAP will in turn inform us of your
action.
*When asking for help or service:
Please provide a detailed description of
the problem, your appliance's complete model and serial nun^rs, and the pur chase date. (See page 2.) This informa tion will help us respond properly to your request.
23
WHIRLPOOL*
Refrigerator Warranty
LENGTH OF WARRANTY FULL ONE-YEAR
WARRANTY
From Date of Purchase
FULL FIVE-YEAR WARRANTY
From Date of Purchase
WHIRLPOOL WILL NOT PAY FOR A. Service calls to:
1. Correct the installation of your refrigerator.
2. Instruct you how to use your refrigerator.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace light bulbs.
B. Repairs when your refrigerator is used in other than normal, single-family household
use.
C. Pickup and delivery. Your refrigerator is designed to be repaired in the home. D. Damage to your refrigerator caused by accident, misuse, fire, flood, acts of God or use
of products not approved by Whirlpool.
E. Any food loss due to product failure. F. Repairs to parts or systems caused by unauthorized modifications made to the
appliance.
WHIRLPOOL WILL PAY FOR
FSP* replacement parts and repair labor to correct
defects in materials or workmanship. Service must be provided by an authorized Whirlpool service company.
FSP replacement parts and repair labor to correct defects in materials or workmanship in the sealed refrigeration
system. These parts are:
1. Compressor
2. Evaporator
3. Condenser
4. Drier
5. Connecting tubing
Service must be provided by an authorized Whirlpool
service company.
S«3
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSE­OUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Outside the UnKed States, a different warranty may apply. For details, please contact your authorized Whirlpool distributor or military exchange.
If you need service, first see the “If You Need Assistance or Service” section of this book. After checking “If You Need Assistance or Service,” additional help can be found by calling our Consumer Assistance Center telephone number, 1-800-253-1301, from anywhere in the U.S.A.
©
Printed on recycled paper-
10% post-consumer waste
50% recovered materials
PART NO. 2170894 Rev. A
01994 Whirlpool Corporation
i Registered Trademark of Whirlpool, U.S>.
Printed In U.SA
Loading...