B136HK1R, B136HK1L Extended Depth Handle Kit
Installation Instructions
Part List
Kit number |
|
B136HK1R |
B136HK1L |
Description |
Quantity |
Part number |
|
Refrigerator door |
1 |
12076403 |
|
handle, right |
|
|
|
Refrigerator door |
1 |
|
12076404 |
handle, left |
|
|
|
Freezer handle |
1 |
12063405 |
12063405 |
Installation |
1 |
12348602 |
12348602 |
instructions |
|
|
|
! Recognize this symbol as a safety precaution
! CAUTION
To avoid personal injury, protect hands and arms by wearing gloves while installing trim kit.
! CAUTION
To avoid property damage, protect soft vinyl or other flooring with cardboard, rugs, or other protective material.
Read entire installation instructions before installing kit. Confirm all parts listed are included in kit. If parts are missing, contact source from whom kit was purchased.
Important
•Mechanical experience is required to install handle kit.
•Depending on installer’s knowledge and skill, installation can take from one-half to one hour.
•If unable to solve a problem during installation contact source from whom kit was purchased.
Procedure
1.Slide out refrigerator handle screw insert and remove handle by removing screws with a Phillips screwdriver.
Standard refrigerator handle
Handle 
screws
Handle
insert
2.See “Door Panel Installation” of Installation and Planning Guide, for panel installation instructions.
3.Install extended refrigerator handle with screws removed in step 1. Install handle screw insert by starting at one end and working upward along the full length of handle.
Extended refrigerator handle
Handle screw insert 
Handle screws
Decorator panels
4.Slide out handle screw insert and remove handle by removing screws with a Phillips screwdriver. Handle is in 2 pieces, reinstall if pieces come apart.
•1/2" x 31/2" notch is required on hinge side.
Handle screw insert |
Handle screws |
Freezer drawer handle |
|
Freezer drawer
5.See “Door Panel Installation” of Installation and Planning Guide, for panel installation instructions.
6.Install extended freezer handle using screws removed in step 4. Install handle screw insert starting at one end and pushing insert into handle groove along full length of extended handle.
Handle screw insert |
Handle screws |
Extended depth 
Freezer drawer handle
Freezer drawer decorator panels
Part No. 12348602 |
Printed in U.S.A. |
Loading...