Whirlpool AWV 689 INSTRUCTION FOR USE
GB
AWV 689
On/Off
Half load
No spin
Rinse hold
PROGRAMME TABLE
min.
A
Programme Type of textiles/Degree of soiling Max.
1
2 Cotton
3 Synthetic
4
5 Delicate
6Wool
A
B Long spin
C
D Short Spin
Cotton
with pre-wash
Cotton short
Synthetic short
Rinse and
long spin
Rinse and
short Spin
Heavily soiled, long wearing and temperature stable textiles in cotton and
linen (bed linen, table linen, underwear, shirts etc). The max. load for heavily
soiled laundry is 3.5 kg.
Averagely soiled, long wearing and temperature stable textiles in cotton and
linen (bed linen, table linen, underwear, shirts etc). The max. load for heavily
soiled laundry is 3.5 kg.
Averagely soiled textiles in cotton, linen, polyester (Diolen, Trevira);
polyamide (Perlon, Nylon), other synthetics or similar blends.
Lightly soiled textiles in cotton, linen, polyester (Diolen, Trevira); polyamide
(Perlon, Nylon), other synthetics or similar blends.
Curtains and delicate synthetic textiles (dresses, skirts and blouses etc). 1.5 — Yes
Only machine washable woollens with pure new wool label. 1.0 — Yes
With this programme you can add fabric softener or starch. The programme
ends with a long spin cycle.
This programme provides a long spin cycle, the same as the spin cycle in the
Cotton programme.
With this programme you can add fabric softener or starch. The programme
ends with a short spin cycle.
This programme provides a short spin cycle, the same as the spin cycle in the
Wool programme.
BC
Detergent and Additives Special functions that can be
Load
Pre-
wash
kg
4.5
4.5 — Yes
2.0 — Yes
2.5
2.0
Wash Fabric
Softener
❉
—Yes
Yes
Half
Load
❉❉❉❉
❉❉❉❉
❉❉❉❉
❉❉❉❉
❉
❉
4.5 — —
4.5 — — — — — — —
1.5 — —
1.5 — — — — — — —
❉❉❉❉
❉
selected
No Spin Rinse
—
—
—
Hold
❉❉
❉
❉❉
Tempera-
Selector
Min. to 95
Min. to 95
Min. to 60
Min. to 40
Min. to 40
No Min. to 40
ture
°C
Min.
Min.
Programme
selector
knob
1
2
3
4
5
6
A
B
C
D
Draining
Drain only, without spin. e.g to unload the laundry earlier. — — — — — — — —
CONSUMPTION DATA
GB
Programme
Cotton 95° C
with pre-wash
Cotton 95° C 2 70 1.80 110
Cotton 60° C 2 70 1.20 110
Synthetic 60° C 3 60 0.90 85
Cotton short 40° C
Synthetic 40° C
Delicate 40° C 5 80 0.60 70
Wool 40° C 6 80 0.60 65
180 2.00 120
4
Water Energy
(l) (kWh) (min)
65
60
0.70
0.60
Programme
duration
75
75
SELECTING THE PROGRAMME
1. Turn the programme selector knob clockwise to the desired programme.
2. Set the temperature knob to the desired temperature.
PRESS THE DESIRED SPECIAL OPTION BUTTON
Lightly soiled/Half load button
• Reduces water consumption, above all during the rinse.
• Especially suitable for lightly soiled or small loads (reduce the detergent quantity).
No spin button
• Press this button to exclude the spin function from the programme.
Rinse hold/Spin delay button
• The laundry remains in the last rinse water without being spun, to avoid heavy
creasing.
• Especially suitable for the “Synthetic” or “Delicate” programmes, if the laundry is not to
be unloaded immediately after the end of the programme.
Stopping Rinse hold
Press the Rinse hold button again; the load will be spun according to the selected
programme.
PROGRAMME START
1. Plug in the appliance.
2. Turn on the water supply tap.
3. Press the “On/Off” button.
DOOR LOCK
The door locks automatically after the programme start until the end of the programme.
PROGRAMME END
• The programme sequence indicator is at “Stop”.
1. Press the “On/Off” button.
2. Cancel the special options by pressing the appropriate buttons.
3. Turn the water supply tap(s) off.
4. Wait for the door to unlock (about 2 minutes).
5. Open the door and unload the machine.
Do not fully close the door but leave it ajar to allow the drum to dry out.
Note:
PROGRAMME RESELECTION
1. Press the “On/Off” button.
2. Select the new programme, temperature and relative options.
3. Press the “On/Off” button.
NOTES AND INDICATIONS FOR USE
Water level
it may not be visible as the cycle is optimised for a minimum water consumption without
compromising washing results.
Cleaning the pump filter
To ensure an impeccable function of the pump, check the filter regular and clean it if
necessary. Close the filter properly to avoid leakage.
Motor smell
Washing machine motor creates a typical electrical smell during first cycles, this is normal
and disappears after a few cycles.
5019 100 00118
Loading...