Whirlpool AWT 5109 INSTRUCTION FOR USE

GB AWT 5109

	A. Programme Selection Knob	“Cold“
	B. Temperature Selection Knob
	C. “Spin Speed Selection” Knob
	D. “On/Off” Button

i : option / Yes: dosing required

1)

Do not use liquid detergents.

2)

For improved garment care, spin speed is restricted

3)

to 800 rpm in this programme.

For improved garment care, spin speed is null

A

B

C D

in this programme.

Max.

Detergents and Additives

Special options

Tempera-

Max.

Care

Load

Pre-

Main

Softener

Bleach

Rapid

Half

Intensive

Rinse

ture

Spin

Programme

Type of wash / Notes

wash

wash

Load

Rinse

Hold

Speed

Labels

kg

°C

rpm

Cotton with prewash

Heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

5,0

Yes 1)

Yes

i

i

–

i

i

i

Max. 90

1000

Synthetic with

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen,Trevira), polyamide

2,0

Yes 1)

Yes

i

–

–

i

i

i

Max. 60

800 2)

prewash

(Perlon, Nylon) or blends with cotton.

Delicate with prewash

Heavily soiled curtains and delicate clothing, dresses, skirts, shirts and blouses.

1,5

Yes 1)

Yes

i

–

–

–

–

i

Max. 40

800 2)

Cotton

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton

5,0

–

Yes

i

i

i

i

i

i

Max. 90

1000

and linen.

Coloured cotton

Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and

3,0

–

Yes

i

–

–

i

i

i

Max. 60

1000

linen.

Daily Mixed

Slightly to normally soiled textiles made of cotton and/or synthetic.

3,0

–

Yes

i

–

–

–

i

i

Max. 60

1000

Mixed Cotton /

Normally to heavily soiled blouses, shirts, overalls etc. made of polyester ( Diolen, Trevira),

2,0

–

Yes

i

–

–

i

i

i

Max. 60

800 2)

Synthetic

polyamide (Perlon, Nylon) or blends with cotton.

Synthetic

Normally soiled overalls ans sportswear made of cotton, polyester, polyamide and blends

1,5

–

Yes

i

–

i

i

i

i

Max. 60

800 2)

with cotton.

Delicate

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

1,5

–

Yes

i

–

–

–

–

i

Max. 40

800 2)

Wool

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

1,0

–

Yes

i

–

–

–

–

i

Max. 40

800 2)

If you select “Rinse Hold” do not leave items to soak for too long.

Handwash

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

1,0

–

Yes

i

–

–

–

–

i

Max. 30

– 3)

If you select “Rinse Hold” do not leave items to soak for too long. No spinning.

Rinse + Gentle

–

Programme for treating delicate laundry with starch or softener.

2,0

–

–

i

–

–

–

–

i

–

800 2)

Spin

Rinse + Spin

–

Programme for treating cotton or linen laundry with starch or softener.

5,0

–

–

i

–

–

–

–

i

–

1000

Spin

–

Programme to spin cotton or linen laundry intensively with maximum spin speed.

5,0

–

–

–

–

–

–

–

–

–

1000

Gentle Spin

–

Programme to spin delicate laundry gently with a restricted spin speed.

2,0

–

–

–

–

–

–

–

–

–

800 2)

Drain

–

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

–

–

–

–

–

–

–

–

–

–

–

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10217

CONSUMPTION DATA

	Temperature	Load	Water	Energy	Approx. Programme
Programme	Selector				Duration
	(°C)	(kg)	(l)	(kWh)	(hours : minutes)
Cotton	90	5,0	63*	1,80	2:05
Cotton	60	5,0	55	0,95	2:05
Cotton	40	5,0	55	0,55	2:05
Daily Mixed	40	3,0	49	0,48	1:00
Synthetic	60	2,0	56	0,80	1:30
Synthetic	40	2,0	56	0,40	1:30
Delicate	40	1,5	60	0,55	0:45
Wool	40	1,0	60	0,50	0:40
Handwash	30	1,0	60	0,30	0:50

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC 60456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The data on the “Energy Label” refer to the programme “Cotton 60°C”.

*To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

PREPARATION OF WASH CYCLE

1.Load the machine, close the drum doors and check that they are properly locked.

2.Add detergents and additives into the dispenser to no more then the “MAX” level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (if necessary)

3.Turn the programme selector knob to the desired programme.

4.Turn the temperature selector knob to the desired temperature.

5.Turn the spin speed selector knob to the desired spin speed. If the spin speed “0” is selected, the final spin is cancelled, but not the intermediate spins. The programme ends with a drain cycle.

SELECT THE DESIRED OPTION

Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.

“Rapid” button

•For fast, energy saving wash cycle.

•Ideally suited for small loads consisting of lightly soiled laundry.

“Half Load” button

•Can be used for small loads and lightly soiled laundry.

•Reduces the water consumption especially during the rinse.

“Intensive Rinse” button

•One rinse cycle is added to ensure a more intensive rinse.

•This option is particulary suitable for areas with very soft water, washing baby linen and people with detergents allergies.

“Rinse Hold” button

END OF WASH CYCLE

•The laundry remains in the last rinse water

without progressing to the final spin cycle to					• The programme selector knob is in the Stop
avoid creasing and prevent colours from fading.							position.
• This option is particularly recommended for the					1.		Press the “On/Off” button		to switch off
“Synthetic”	, “Delicate”		and “Daily				the machine.
Mixed”	programmes.				2.		Cancel the option.
• This function is particularly useful if you want to					3.		Turn the tap off.
postpone spinning to a later time, or if you want					4.		Wait for the lid to unlock (about 1 minute).
to drain only.					5.		Open the lid and the drun doors and unload
Note: The programme selector knob stops on				.			the machine.
Appliance in “Rinse Hold”		:
• Press the “Rinse Hold” button			again: the			CHANGE THE PROGRAMME DURING
programme will terminate automatically with						THE WASH CYCLE
the selected spin cycle.
					1.		Switch off machine by pressing the “On/Off”
• If you do not wish to spin the clothes, press the
“On/Off” button , turn the programme							button .
selector knob to the “Drain” programme				and	2.		Select the new programme.
press the “On/Off” button			again.		3.		Start programme by pressing the “On/Off”
							button	again.

PROGRAMME START

Turn on the tap and press the “On/Off” button The indicator light of the “On/Off” button lights up.

Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.

PAUSE/INTERRUPT A PROGRAMME

If, for any reason, you wish to interrupt the programme for a certain time and continue it later:

1.Press the “On/Off” button .

2.After the desired pause, press again the

“ON/Off” button .

CANCEL PROGRAMME

1.Switch off the machine by pressing the

“On/Off” button .

2.Set the programme selector to “Drain”.

3.Press the “On/Off” button again to start the “Drain” programme .

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10217