Whirlpool AWT 4080 INSTRUCTION FOR USE

AWT 4080

PROGRAMME TABLE

Prewash Cotton

Coloured cotton Rapid

Synthetic Rinse Long spin

Short spin

Programme Type of fabrics / Degree of soiling / Notes Max.

Cotton

with

prewash

Cotton

Coloured

Cotton

Rapid

Synthetic

Rinse+Spin

Heavily soiled, hard wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.). The max. load for heavily soiled laundry is 3.5 kg.

Averagely soiled, hard wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Lightly soiled textiles in cotton or linen blouses, shirts, dark coloured terry cloth, coloured linen articles, jeans, etc.

Lightly or averagely soiled blouses, shirts, etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or cotton blends.

Programme for treating wash with starch or softener. Terminates with an intensive spin cycle.

Delicate Wool Drain` Half load option Spin speed

reduction option Rinse Hold Option Cold

On/Off button

Load

4.5 Yes Yes

2.0

4.5

2.0

4.5

1) For improved garment care, spin speed is restricted.

2) Programme duration figures (guideline) are valid for maximum temperature wash with no special functions.

Detergent and Additives Options Temperature

Prewash Wash Softener

Bleach

Spin

speed

reduction

Half

Load

Rinse

Hold

❉❉❉ ❉ ❉

—

——

Yes

❉

—

❉ ❉

—

❉❉❉ ❉❉❉ ❉❉❉ ❉❉❉

Selector

°C

to 90

to 60

to 40

to 60

Programme

Duration

approx.

min 2)

130

115

100

Long Spin

Delicate

Wool

Rinse+Spin

Short Spin

Drain

Programme for intensive spin cycle. 4.5

Delicate curtains, dresses, shirts and blouses. 1.5

Only machine washable woollens with pure new wool label. If you select the special function “Rinse Hold” do not leave garments to soak for too long.

Programme for treating wash with starch or soft ener. Termina tes with a gentle spin cycle.

Programme for gentle spin cycle. 1.5

Drain only, without spin cycle. Alternative way of terminating programmes with “Rinse Hold” setting.

1.0

4.5

—————— —— —

———

—

——

———

N.B.: The excess of detergent in the dispenser could cause technical problems.

Yes

—

❉

—

❉

—— —

—

—— —

❉

to 40

to 30

❉

5019 100 12677

CONSUMPTION DATA

Programme Temperature

Selector

(°C)

Cotton 90 4.5 72 1.80 115

Cotton 60 4.5 69 1.04 115 Coloured cotton 60 2.0 66 0.80 100 Coloured cotton 40 2.0 54 0.40 100

Rapid + Half Load 40 2.5 49 0.50 85

Synthetic + Half Load 30 1.5 45 0.30 70

Delicate 40 1.5 70 0.65 55

Wool 40 1.0 70 0.55 45

Prewash cycle increases programme duration by approx. 15 minutes. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

Load

(kg)

Water

(l)

Energy

(kWh)

Programme

Duration

(min)

ADDING DETERGENT AND ADDITIVES

Add the detergent and the additives into the dispenser as follows:

• Programmes with pre- and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (water hardness 4)

Important:

• Be careful not to fill more than the

“MAX”

level mark.

• For programmes with prewash: do not use liquid detergents.

• For programmes without prewash from cold to 40° C it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1. Turn the

2. Turn the

3. Turn the

programme selector knob temperature knob spin speed selector

to the required temperature.

to the required setting.

clockwise to the desired programme.

PRESS ANY DESIRED SPECIAL OPTION BUTTON(S).

Spin Speed Reduction button “”

• Press the button to set the spin speed.

Note:

Every programme has an automatic maximum spin speed.

Half Load button “”

• Reduces water consumption in the cottons and easy care programmes, above all during the prewash and the rinse.

• Especially suitable for lightly soiled or small loads (reduce the detergent quantity).

Rinse Hold button “”

• The laundry remains in the last rinse water without progressing to the spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes Synthetic “” or Delicate “”.

• This function is particularly useful if you want to postpone spinning to a later time or when you do not wish to spin the clothes.

Note:

The programme selector knob stops on the position “”.

Terminate the programme:

• Press the Rinse Hold button again; the programme will terminate automatically with the spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme knob to the drain programme “” and push the “On/Off” button.

PROGRAMME START

Open the tap and press the “On/Off” button “”. The pilot lamp lights up.

DOOR LOCK

During the running programme the door cannot be opened.The door locks automatically in all programmes. If the programme is stopped or the electrical power supply is terminated, the door lock will open after approximately 1 minute.

PROGRAMME END

• The programme selector knob is at “Stop”.

1. Press the “On/Off” button “”

2. Cancel the special o p tions by pressing the appropriate buttons.

3. Turn the water supply tap off.

4. Wait for the door to unlock (about 1 minute).

5. Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1. Press the “On/Off” button to switch off the appliance.

2. Select the new programme, temperature and options.

3. Press the “On/Off” button to switch on the appliance.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Press the “On/Off” button to switch off the appliance.

2. Set the programme selector to drain “”.

3. Press the “On/Off” button to start the drain programme. Only open the door when the programme selector is at “Stop” and the door is unlocked (after approximately 1 minute).

5019 100 12677