Whirlpool AWT 4063 INSTRUCTION FOR USE

AWT 4063

PROGRAMME TABLE

Wool On/Off

Programme Type of fabrics / Degree of soiling / Notes Max.

Prewash

Prelavaggio

Cotton

Cotone

Coloured

Colorati

Rapid

Rapido

Synthetics

Sintetici

Rinse+Spin

Risciacquo +

Centrifuga

Spin

Centrifuga

Delicates

Delicati

Wool

Lana

Rinse+Spin

Risciacquo +

Centrifuga

Spin

Centrifuga

Drain

Scarico acqua

Heavily soiled, hard wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.). The max. load for heavily soiled laundry is 3.5 kg. Averagely soiled, hard wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Lightly soiled textiles in cotton or linen blouses, shirts, dark coloured terry cloth, coloured linen art icles , jeans, etc. Lightly soiled textiles in cotton or linen blouses, shirts, dark coloured terry cloth, coloured linen art icles , jeans, etc. Lightly or averagely soiled blouses, shirts, etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or cotton blends.

Programme for treating wash with starch or softener. Terminates with an intensive spin cycle.

Programme for intensive spin cycle. 5.0

Delicate curtains, dresses, skirts and blouses. 1.5 Only machine washable woollens with pure new wool label. If

you select the special function “Rinse Hold” do not leave garments to soak for too long.

Programme for treating wash with starch or softener. Terminates with a gentle rinse cycle.

Programme for gentle spin cycle. 1.5 Drain only, without spin cycle. Alternative way of terminating

programmes with “Rinse Hold” setting.

Load

5.0 Yes Yes

2.0

5.0

2.0

5.0

1.0

5.0

—————— —— — — —

Detergent and Additives Options Temperature

Pre-

wash

Wash Softener

Bleach

Intensive

Rinse

Delicate Rinse

Hold

Selector

°C

Cold to 90 700 600 to 700 130

Cold to 90 700 600 to 700 115

Cold to 60 700 450 to 700 100

Cold to 40 700 450 to 700 85

Cold to 60 700 450 to 700 70

❉

Cold 700 450 to 700 20

— —

—

Yes

——

❉❉❉ ❉❉

❉❉❉ ❉❉ ❉

❉ ❉

❉

— —

——

❉❉❉ ❉❉❉

❉❉

—— —

———— — —— — —

—

Yes

——

❉ ❉

❉

——

❉❉ ❉❉

—— —

Cold to 40

Cold to 30

❉

Cold

———— — —— —

1) For improved garment care, spin speed is restricted.

2) Programme duration figures (guideline) are valid for maximum temperature wash with no special functions.

Maximum Technical

Spin

Speed

rpm/min

700 450 to 700 10

600

Recommended

Spin Speed

rpm/min

100 to 400 55

100 to 400 45

100 to 400 15

100 to 400 5

Programme

Duration

approx.

min

N.B. The excess of detergent in the dispenser could cause technical problems.

5019 100 12619

CONSUMPTION DATA

Programme Temperature

Selector

(°C)

Cotton + Intensive Rinse 90 5.0 72 1.80 115

Cotton 60 5.0 59 1.15 115

Cotton + Intensive Rinse 60 2.0 66 0.80 100

Coloured 40 2.0 54 0.40 100

Rapid 40 2.0 54 0.50 85

Synthetics 30 1.5 54 0.30 70

Delicates 40 1.5 70 0.65 55

Wool 40 1.0 70 0.55 45

Prewash cycle increases programme duration by approx. 15 minutes. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

Load

(kg)

Water

(l)

Energy

(kWh)

Programme

Duration

(min)

ADDING DETERGENT AND ADDITIVES

Add the detergent and the additives into the chamber as follows:

• Programmes with pre- and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (water hardness 4)

Important:

• Be careful not to fill more than the

“MAX”

level mark.

• For programmes with prewash: do not use liquid detergents.

• For programmes without prewash from cold to 40° C it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1. Turn the

2. Turn the

3. Turn the

programme selector knob temperature knob spin speed selector

to the required temperature.

to the required setting.

clockwise to the desired programme.

PRESS ANY DESIRED SPECIAL OPTION BUTTON(S).

“Intensive Rinse” button

• The water level increases for improved rinsing efficiency.

• This option is particularly suitable for areas with very soft water washing baby linen

and helps people with allergies.

“Delicate” button

• In the case of fragile or delicate linen, this option shortens the time for which the drum rotates. The linen is treated more delicately and creasing and crumpling are reduced.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes Synthetics or Delicates.

• This function is particularly useful if you want to postpone spinning to a later time or

when you do not wish to spin the clothes.

Note:

The programme selector knob stops on the position “”.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme knob to the drain programme and push the On/Off button “”.

PROGRAMME START

Open the tap and press the On/Off button “”. The pilot lamp lights up.

DOOR LOCK

During the running programme the door cannot be opened.The door locks automatically in all programmes. If the programme is stopped or the electrical power supply is terminated, the door lock will open after approximately 1 minute.

PROGRAMME END

• The programme selector knob is at “Stop”.

1. Press the On/Off button “”.

2. Cancel the special options by pressing th e appropriate buttons.

3. Turn the water supply tap off.

4. Wait for the door to unlock (about 1 minute).

5. Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1. Press the On/Off button “” to switch off the appliance.

2. Select the new programme, temperature, spin speed and options.

3. Press the On/Off button “” to switch on the appliance.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Press the On/Off button “” to switch off the appliance.

2. Set the programme selector to “Drain”.

3. Press the On/Off button “” to start the drain programme. Only open the door when the programme selector is at “Stop” and the door is unlocked

(after approximately 1 minute).

5019 100 12619