Whirlpool AWOE 9701, AWOE 9700 INSTRUCTION FOR USE

GB PROGRAMME CHART

H

A. “Door open” indication
This washing machine is equipped with

automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

Programme

White Cotton /

Antibacterial

Cotton/

Coloured

Tempe-

rature

70 - 95 °C

20 - 60 °C

Care

Labels

C
D

Max.
Load

kg

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of

7.0

cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been tested following a

7.0

similar methodology to the NF EN 13697 standard of Nov. 2001.

Type of wash/Notes

}

E

F

A
B

I

L

K

J

F. “Start (Pause)” button
G. “Variable spin” button

H. Programme sequence indicator
I. “Reset/Drain” button
J. “Start delay” button
K. “Temperature” button

E. Programme selector

delay

L. Display

Pre-

wash

G

Detergents and additives Special options

Pre-

Main

Wash

Yes

Softener Start

❉❉❉❉ ❉ ❉❉

wash

❉

Clean+ Easy

ironing

Intensive

rinse

/

Variable

spin

Max
Spin

Speed

rpm

max.

Synthetics

Delicates

Wool

Handwash

Jeans

Big Items

Sport

SuperEco

Daily load

Speed 15

Rinse & Spin

Spin

optional / Yes : dosing required

❉

:

1)

For improved garment care, spin speed is restricted in this programme.

20 - 60 °C

20 - 40 °C
20 - 40 °C

20 - 40 °C
20 - 60 °C

20 - 60 °C

20 - 30 °C

20 - 60 °C

20 - 60 °C

20 - 30 °C

——
——

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

3.5

(Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

2.5

Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine

2.0

washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark Company for

2.0

handwashable wool.
Normally soiled cotton jeanswear and garments made of robust jeanslike material such as

7.0

trousers and jackets.
Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other

3.0

artificial fibres; sleeping bags, bathmats and similar items.
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.

This programme includes a prewash cycle – you can add detergent also to the prewash chamber.

3.5

Do not add any softener.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run

7.0

overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning
at night, set spin speed to “0” and start spin programme in the morning, or define programme
start with “Start Delay” accordingly.

Slightly to normally soiled textiles made of cotton and/or synthetics.

6.0

Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with

3.0

cotton.

Same as the last rinse and the final spin in the “Cotton” programme.

7.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

7.0

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

❉

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

—
——

❉❉❉❉ ❉ ❉❉
❉❉❉

❉❉
❉❉

❉❉❉❉
❉❉❉

—

❉❉

❉❉
❉❉

❉❉

—— —

———

—— — —
—— — —

——

——

——

❉

❉❉❉

—— —

——

❉❉❉

—— — —
—— —
—— — —

❉

Whirlpool is a registered trademark of Whirlpool USA

max.

❉

1000

❉

1000

400

max.

1000

max.

max.

max.

max.
max.
max.

1)

❉
❉

❉❉

❉❉

❉

❉❉

❉

5019 301 06254

1)

1)

1)

CONSUMPTION DATA

Programme

White Cotton / Antibacterial 95 7.0 74

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may va r y
with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*
**
***

Cotton

***

Cotton 40 7.0 69 0.75 2:05
Synthetics 60 3.5 46
Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool 40 2.0 60 0.60 0:45

Handwash 40 2.0 45 0.60 0:40

Jeans 40 7.0 86 0.75 2:21

Big Items 40 3.0 74 0.75 1:30

Sport 30 3.5 54 0.55 1:34

SuperEco 60 7.0 69 0.84 4:00

Daily load 40 6.0 73 0.60 1:00

Speed 15 30 3.0 30 0.20 0:15

The time indicated on the display can deviate from the valu es in the table, because it takes into account the operation conditi ons applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label.

Temp e rat u re

(°C)

60 7.0 54 1.19 2:20

ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent
as indicated on the front page and as described in the chapter
“Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

programme. The display shows the programme
duration in hours and minutes as well as the predefined
temperature. The

temperature

“Temperature” button.
lights up; in case you want to set another spin speed,

press the “Variable spin” button .

“Start (Pause)”

can be altered by pressing the

to the desired

button blinks.

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and option is not
possible, the lights switch off automatically. Unsuitable
combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for exam pl e sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.

• Do not use liquid detergent for the main wash when
activating the Prewash option.

“Clean +” button

• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.

• Choose temperature of 30 or 40°C and use with
maximum load.

• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together
with your detergent (only use powder detergent with this
option). Respect the manufacturer’s dosing instructions.

Load

Water

(kg)

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on

“Easy ironing” button

• Helps to make ironing easier.

• Increases the water quantity and the clothes are spun

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is

•If you select

Energy

(l)

(kWh)

2.10 2:10

**

0.85 1:35

**

oxygen basis.

not be used!

very gently.

soft water , washing baby linen and helping people with
allergies.

cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.

in the last rinse water without progressing to the final
spin cycle to avoid creasing and prevent colours from
changing.

-Select

- Do not leave the laundry to soak in the rinse hold

- The programme stops to “Rinse hold” when the

-To terminate the “Rinse hold” by draining the

- To terminate the programme by spinning the

“Rinse hold”

spinning to a later time or if you want to drain only.
for too long.
“Rinse hold” light in the programme sequence

indicator is on; the “Rinse hold” light of the
“Variable spin” button and the
button light blink.

water, without any spinning, press the

(Pause)”

laundry, press the “Variable spin” button to select
the desired spin speed and then the

(Pause)”

Approx. Programme Duration

(hours : minutes)

Chlorine or perborate bleaches must

“Rinse hold”

button .

button to start the spin cycle.

, the laundry remains

if you want to postpone

“Start (Pause)”

*

“Start

“Start

START DELAY

The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select a delay time up
to 23 hours; the light of the
button blinks.

• Press the
of the delay time begins. The light of the

(Pause)”

button will keep blinking until the programme starts.

• As soon as the programme starts, the start delay on
the display is replaced by the remaining programme
time, and the light of the “Start delay” button goes off.

• Once having pressed the
the number of hours preselected can be changed by
pressing and holding the “Start delay” button.

To cancel the “Start delay”
..before you press “Start (Pause)” :

• Turn the programme selector to another position or
press the

..after having pressed “Start (Pause)” :

• Press
from the display; press
start the selected programme immediately.

“Start (Pause)”

button is on; the light of the start delay

“Reset/Drain”

“Start (Pause)”

“Start (Pause)”

button ; the countdown

“Start (Pause)”

button .

- the delay time disappears

“Start (Pause)”

“Start

button ,

/

again to

PROGR AMME START

Open the tap and press
stops blinking and is on. The programme sequence
indicator shows the current programme phase, running
from left to right through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the
remaining time is newly calculated in certain programme
phases. If this is the case,

.

display

“Start (Pause)”

an animation appears on the

; the light

CHILD LOCK

Activating the child lock prevents children from starting a
wash cycle or changing the settings of a running programme.
The child lock cannot be activated or deactivated when the
programme selector is in the “Off/O” position. To activate
the child lock:

• Turn the programme selector to a programme
position, or run a programme as usual.

• Press the 2 buttons marked with the key
symbol simultaneously for at least 3 seconds; a
key-like symbol will shortly appear on the display to
indicate that the child lock is active.

Any time you try to change a programme setting with
active child lock, the display will shortly show the key-like
symbol. The programme setting cannot be changed
anymore; the only change possible is to switch the washer
off by turning the programme selector to the “Off/O”
position. To deactivate the child lock:

• Press again the 2 buttons marked with the key
symbol simultaneously for at least 3 seconds.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter
case refer to the Instructions for Use (“Removing the
Filter”).

PROGRAMME END

• The display shows “End” and the “Door open”
indication lights.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press

2. Select the new programme, temperature, any options

3. Press

“Start (Pause)”

the light blinks.
and another spin speed if you want.

“Start (Pause)”

the programme continues continues at the same
position where the previous programme was
interrupted. Do not add detergent for this
programme.

to pause the programme;

again. The light is on, and

RESET A RUNNING PROGRAMME BEFORE
THE END

The

“Reset/Drain”

programme before the end.

• Press the
least 3 seconds; “rES” appears on the display. Any
existing water is drained before the door can be
opened.

button cancels a

“Reset/Drain”

Whirlpool is a registered trademark of Whirlpool USA

/

button for at

/

5019 301 06254