Whirlpool AWOE 91200 INSTRUCTION FOR USE

30106292GB.fm Page 1 Thursday, June 11, 2009 12:05 PM

GB PROGRAMME CHART

A. Programme selector B. Display C. “Temperature” button

D. “Variable spin” button E. “Start delay” button

F. “Start (Pause)” button G. “Reset/Drain” button

H. “Favourites” button

Programme

White Cotton /

Antibacterial

Cotton

Synthetics

Delicates

Wool

Handwash /

Lingerie

Jeans

Big Items

Sport

SuperEco

Tempe-

rature

Care

Max

Load

Labels

70 - 95 °C 9.0

20 - 60 °C

20 - 40 °C 20 - 40 °C 2.0

20 - 40 °C 2.0

20 - 60 °C 7.0 20 - 60 °C

20 - 30 °C

20 - 60 °C 9.0

9.0

3.5

2.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

3.0

3.5

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry . The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool. Textiles made of silk, linen, wool and viscose marked as “handwashable”. Up to a temperature of 30°C, this cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended). This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool. Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets. Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other artificial fibers; sleeping bags, bathmats an d similar items. Normally soiled and sweaty sportswear made of cotton jersey or microfibers.

This programme includes a prewash cycle – you can add detergent also to the prewash chamber. Do not add any softener.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

}

K G

C D

E H

Detergents and additives Selectable options Start

Pre-

Main

wash

Yes

❉

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

❉

Yes

❉

Yes

❉

Yes

—

Softener Pre-

wash

❉❉❉ ❉ ❉ ❉ ❉

❉❉❉ ❉ ❉ ❉ ❉ ❉❉

—— — —

❉

—— — —

❉

❉❉❉ ❉❉

———

—— —

❉

Add garment Programme

J. “Child lock” indication K. “Detergent overdosage” indication L. Red failure indications

Clean + Easy

ironing

———

——

❉❉❉❉

I. Programme sequence indication

in process

Intensive

rinse

delay

Programme

Variable

spin

❉❉ ❉❉

❉❉

❉❉❉

finished

Spin

Max Spin

Speed

rpm

max.

1000 1000

400

max.

1000

max.

Daily load

Speed 15

Rinse & Spin

Spin

❉

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Black process 45.0° 150.0 LPI

20 - 60 °C

20 - 30 °C 3.0

—— ——

6.0 Slightly to normally soiled textiles made of cotton and/or synthetics. Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends

with cotton.

9.0 Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

9.0

programme.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

Yes

—

Yes

— ——

——

❉

—— — —

❉

—— —

❉

❉❉❉❉

❉❉❉

————— — —

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06292

❉❉

max.

max. max. max.

30106292GB.fm Page 2 Thursday, June 11, 2009 12:05 PM

CONSUMPTION DATA

Programme

Temp e ratu r e

(°C)

White Cotton / Antibacterial 95 9.0 87

Cotton

***

60 9.0 64 1.53 2:30

Cotton 40 9.0 82 0.80 2:15 Synthetics 60 3.5 46 Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool 40 2.0 60 0.60 0:45

Handwash / Lingerie 40 2.0 45 0.60 0:40

Jeans 40 7.0 95 0.85 2:31

Big Items 40 3.0 74 0.75 1:30

Sport 30 3.5 54 0.55 1:34

SuperEco 60 9.0 80 1.08 4:00

Daily load 40 6.0 73 0.60 1:00

Speed 15 30 3.0 30 0.20 0:15

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditi ons

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme; the light of the

“Start (Pause)”

spin speed

“Temperature” button or the “Variable spin” button .

indicated on the display can be altered by pressing the

button blinks. The

temperature

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder , for example “Vanis h”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis.

Chlorine or perborate bleaches must not be used!

Load

Water

(kg)

“Easy ironing” button

• Makes ironing easier by an increased water quantity and a very

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or

and

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but

• If you select “Rinse hold” , the laundry remains in the last

Energy

(l)

(kWh)

2.60 2:20

0.85 1:35

gentle spin.

for washing baby linen, and helps people with allergies.

intermediate spin peaks remain during rinse. The water is drained out only.

rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing. To activate the “Rinse hold”, press the “Variable spin” button repeatedly until the “Rinse hold” symbol on the display lights up.

- The wash programme stops to “Rinse hold” when the “Rinse hold” symbol on the display blinks; the light of

“Start (Pause)”

- To terminate the “Rinse hold” by draining the water, without any spinning, press the

- To terminate the “Rinse hold” by spinning the laundry, press the “Variable spin” button to select the desired spin speed and then

- Do not leave the laundry to soak for too long in the “Rinse hold”.

“Start (Pause)”

Approx. Programme Duration

(hours : minutes)

button blinks as well.

“Start (Pause)”

to start the spin cycle.

SAVE Y OUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and

button.

option(s), push and hold the least 3 seconds. The lamp next to

blinks and then lights up - the programme setting is saved. Next time you want to use your individual programme setting, select the programme, push the start by pushing If you want to replace the saved programme setting by another one, proceed as already described above.

“Start (Pause)”

“Favourites”

button for at

“Favourites”

button and

shortly

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature, spin speed and options.

• Press the Start delay button to select one of the delay time

steps between 0:30 and 23:00 hours.

•Press the

• The time delay indication disappears when the programme

To cancel the “Start delay” ..before you press the “Start (Pause)” button:

• Press the

..after having pressed the “Start (Pause)” button:

Press the start delay time disappears from the display. Or press

(Pause)”

“Start (Pause)”

The countdown of the delay time begins; the clock symbol next to

the delay time and the colon between hours and minutes blink.

starts and it is replaced by the remaining programme time.

“Reset / Drain”

time to “0:00” - the delay time disappears after a few seconds.

“Reset/Drain”

twice to start the selected programme immediately.

button .

button , or set the start delay

button for at leas t 3 seconds; the

“Start

“ADD GARMENT” INDICATION

Before starting a programme, the symbol lights to show that the door can be opened to add more washing. As soon as you press

“Start (Pause)”

programme and must on no account be forced open. In case you have to open it urgently during a running programme, refer to “Reset a running programme before the end”. If you try to start a wash programme and the door is not properly closed, the “Add garment” indication will blink.

, the door will lock until the end of the

PROGR AMME START

Open the tap and press the blinking

“Start (Pause)”

“Add garment” indication goes out, and the lit bubbles indicate that the programme is in process. In some phases, the remaining programme time is newly calculated - if this is the case, the “6 sense” indication on the display will fade, and the remaining programme time is replaced by an animation.

“Start (Pause)”

button light becomes constant. The

button ; the

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the “Temperature” and the “Variable spin” button simultaneously for at least 3 seconds. The “Child lock” symbol will shortly blink and then light up to indicate that the child lock is active.

The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock, proceed in the same way as for activating it.

RED FAILURE INDICATIONS

If one of the red failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

• The display shows “End”, and the “Programme finished”

indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

• If you do not turn the programme selector to the “Off / O” position, all lights of the control panel go out after a few minutes to save energy - only “End” will remain on the display.

DETERGENT OVERDOSAGE INDICA TION

The symbol will blink at the end of the programme if you used too much detergent. Use less detergent next time.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme, temperature, any options and

3. Press the

“Start (Pause)”

programme. The light blinks.

another spin speed if you want.

“Start (Pause)”

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the

button again. The new

RESET A RUNNING PROGRAMME BEFORE THE END

The

“Reset/Drain”

•Press the

animation appears on the display. Any existing water is drained out before the door can be opened.

button cancels a programme before the end.

“Reset/Drain”

button for at least 3 seconds; an

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06292

Black process 45.0° 150.0 LPI