Whirlpool AWOE 8712, AWOE 8812, AWO/D 8712 INSTRUCTION FOR USE
30106303GB.fm Page 1 Tuesday, June 30, 2009 11:54 AM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
Cotton /
Antibacterial
Cotton
Coloured
Synthetics
Tempe-
rature
70 - 95 °C
20 - 60 °C
20 - 60 °C
Care
Labels
C
D
Max
Load
- Respect the manufacturer’s recommendations on the care
label
kg
Normally to heavily soiled bed linen, table linen and underwear,
max.
towels, shirts etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates
bacteria, ensuring sanitization of your laundry . The bacteria removal
max.
efficiency has been tested following a similar methodology to the NF
EN 13697 standard of Nov . 2001.
Normally soiled blouses, shirts, overalls etc. made of polyester
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with
3.0
cotton.
Type of wash/Notes
H
E
}
F
E. Programme selector
F. “Start (Pause)” button
A
B
L
G. “Spin speed” button
H. Programme sequence indicator
I
I. “Reset” button
J. “Start delay” button
J K G
Detergents and additives Special options
Pre-
Main
wash
❉
❉
Softener Eco Pre-
wash
Yes
Yes
❉❉❉❉ ❉ ❉ ❉❉
❉❉❉❉ ❉ ❉ ❉❉
wash
K. “Temperature” button
L. Display
Start
delay
Easy
ironing
Intensive
rinse
Rinse
hold
Spin
speed
Max
Spin
Speed
rpm
max.
max.
Daily load
Chrono 30’
Delicates
Jeans
Lingerie
Wool
Handwash
Rinse & Spin
Spin
Gentle Spin
Drain
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted in this programme.
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
——
——
——
———
Slightly to normally soiled textiles made of cotton and/or
4.0
synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide
4.0
and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Normally soiled cotton jeanswear and garments made of robust
max.
jeanslike material such as trousers and jackets.
This cycle is particularly suitable to treat delicate lingerie (use of a
1.0
laundry net strongly recommended).
Only woollens, labelled with the Woolmark and identified as
machine washable.
1.0
This programme (40°C) is tested and approved by The Woolmark
Company for machine washable wool.
Textiles made of silk, linen, wool and viscose marked as
“handwashable”.
1.0
This programme (40°C) is tested and approved by The Woolmark
Company for handwashable wool.
Same as the last rinse and the final spin in the “Cotton” programme.
max.
In this programme spinning is intensive. Same as the spin cycle in the
max.
“Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the
1.0
“Wool” programme.
Drain only - no spinning. Alternative method of terminating programme after
“Rinse Hold”.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0620
Yes
—
Yes
—
Yes
❉
Yes
❉
Yes
—
Yes
—
Yes
—
——
——
❉
——
❉
—
❉
❉❉
❉❉❉❉
——
❉
——
❉
——
❉
——
❉
—— ———
—— ———
—— ———
❉❉ ❉❉❉
❉
❉
❉
❉
❉
❉
❉
❉
——
——
——
——
——
——
—
❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
———
———
—————
Whirlpool is a registered trademark of Whirlpool USA
max.
max.
1000
max.
400
1000
400
max.
max.
❉
❉
1000
5019 301 06303
1)
1)
1)
1)
1)
Black process 45.0° 150.0 LPI
30106303GB.fm Page 2 Tuesday, June 30, 2009 11:54 AM
PROGRAMME DA TA
***
Temp e ratu r e
(°C)
60 max. 54 1.19 2:20
Programme
Cotton / Antibacterial 95 max. 74
Cotton Coloured 60 max. 69 1.33 2:10
Cotton Coloured with “Eco”
Cotton Coloured 40 max. 69 0.75 2:05
Synthetics 60 3.0 46
Synthetics 40 3.0 42 0.40 1:20
Daily load 40 4.0 48 0.50 1:00
Quick wash 30 4.0 48 0.25 0:30
Delicates 30 1.5 60 0.50 0:45
Jeans 60 max. 86 0.80 2:26
Lingerie 30 1.0 45 0.45 0:40
Wool 40 1.0 60 0.55 0:45
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
**
***
Handwash 40 1.0 45 0.55 0:40
The time indicated on the display can deviate from the values in the table, because it takes into account the household
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the
2. The
3. The indication lamp of the predefined
programme selector
programme. The display shows the programme
duration in hours and minutes as well as the predefined
temperature. The
temperature
“Temperature” button .
lights up; in case you want to set another spin speed,
press the “Spin speed” button .
“Start (Pause)”
can be altered by pressing the
to the desired
button blinks.
spin speed
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective
indication lights up.
When the combination of programme and additional option is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
Load
Water
(kg)
• Do not use liquid detergent for the main wash when
“Easy ironing” button
• Reduces creasing by an increased water quantity and a
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
“Rinse hold” button
• The laundry remains in the last rinse water without
• This option is particularly recommended for the
• It is particularly useful if you want to postpone spinning
• If you select “Rinse hold” , do not leave the
Terminate the “Rinse hold” option :
• Press the
• If you do not wish to spin the clothes, turn the
Energy
(l)
(kWh)
2.10 2:10
**
0.80 1:35
**
activating the Prewash option.
very gentle spin.
soft water, for washing baby linen and for helping
people with allergies.
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
programmes “Synthetics”, “Daily wash” and “Delicates”.
to a later time, or if you want to drain only.
laundry to soak for too long.
The programme stops to “Rinse hold” at the
Note:
time the “Rinse hold” light in the programme
sequence indicator is on. The indication lamp next to
the
“Start (Pause)”
“Start (Pause)”
programme will terminate automatically with the final
spin cycle for the present wash programme.
programme selector to the “Drain” programme and
press the
“Start (Pause)”
Approx. Programme Duration
(hours : minutes)
button blinks.
button ; the
button .
*
“Spin speed” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
START DELAY
The “Start delay” allows to run the machine at the
consumer’s convenience. Do not use liquid detergent
when activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time
by 1 to 23 hours;
• Press the
The countdown of the delay time begins; the light of
the “Start delay” button and the dot on the display will
blink until the programme starts.
• The time delay indication disappears when the programme
starts and it is replaced by the remaining programme time.
• Once having pressed the
the number of hours preselected can be reduced by
pressing and holding the “Start delay” button. From 1
hour on, the delay time can also be reduced by minutes.
To cancel the “Start delay”
..before you press the “Start (Pause)” button :
• Turn the programme selector to another position or
press the
..after having pressed the “Start (Pause)” button :
• Press the
the start delay time disappears from the display.
“Start (Pause)”
“Reset”
“Reset”
button .
“Start (Pause)”
button .
button for at least 3 seconds -
button ,
PROGR AMME START
Open the taps and press the
The indication lamp next to the
lights up. The programme sequence indicator shows
the current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is
the case,
an animation appears on the display
“Start (Pause)”
“Start (Pause)”
button .
button
.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water taps; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water taps.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
programme. The light blinks.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
“Start (Pause)”
“Start (Pause)”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds;
“Reset”
“rES” appears on the display. Any existing water is
drained out before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06303
Black process 45.0° 150.0 LPI
Loading...