Whirlpool AWOE 8760, AWOE 8760B INSTRUCTION FOR USE

30106401GB.fm Page 1 Friday, June 4, 2010 9:02 AM

GB PROGRAMME CHART

1. Programme selector

2. “Temperature” button

3. “Spin” button with “Rinse hold”

4. “Start delay” button

5. “Soil level” button

6. “Dosing aid” button

7. “Start (Pause)” button

8. “Reset/Drain” button

2 3

465

Programme sequence indication “Soil level” indications

“Start delay” indication “Child lock” indication “Detergent overdosage” indication “Dosing aid” indication “Detergent calibration” indication Red failure indications

(depending on the model)

Tempe-

Programme

Mixed

Cotton

Synthetics

Delicates

Fabrics

Wool/Handwash

White

Light colours

Colours

Dark

SuperEco

AquaEco

Eco

Speed 15

Jeans

Big Items

Specials

Rinse & Spin

❉

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

rature

20 - 60 °C 6.0

20 - 95 °C 8.0

20 - 60 °C 3.5

20 - 40 °C 2.5

20 - 40 °C 2.0

20 - 60 °C 8.0

20 - 60 °C 5.5

20 - 60 °C 5.0

20 - 60 °C 8.0

20 - 40 °C 3.0

20 - 30 °C 3.0 20 - 60 °C 7.0

20 - 60 °C 3.0

——

Care

Labels

Max. Load

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load. If soil level requires, add oxygen-based stain removers.

Normally to heavily soiled towels, underwear , table and bed linen etc. made of cotton and linen.

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses. Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles

made of silk, linen, wool and viscose marked as handwashable.

This programme is tested and approved by The Woolmark Company for machine- and handwashable wool. Select spin speed according to the manufacturer's recommendations on the care label.

Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for dark garments with this programme.

Normally to heavily soiled and robust underwear, table and bed linen, towels and shirts made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount for 3kg laundry. Do not use softener.

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

Refresh programme. Use lowest recommended detergent amount.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.

Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other artificial fibres; sleeping bags, bathmats and similar items.

Rinse and intensive spin programme.

8.0

Same as the last rinse and the final spin in the “Cotton” programme.

- Respect the manufacturer’s recommendations on the care label

The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

Type of wa s h / N o t e s

Detergents and additives Selectable options Dosing

Pre-

Main

wash

Yes

—

Yes

❉

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

—

Yes

❉

Yes

❉

——

Softener Pre-

❉

❉❉❉❉❉❉❉❉❉❉

❉❉❉❉❉❉❉❉❉❉ ❉❉—❉

❉

❉❉—❉

❉❉—❉❉

❉

————— —

❉ ❉❉❉❉❉

❉❉—❉❉ ❉

Eco Soil

wash

——

level

Intensive

rinse

Easy

ironing

❉❉ ❉ ❉❉❉ ❉

——

——❉——

——

❉❉ ❉ ❉❉❉ ❉

——

—

——

❉❉

—

——— — —

— —

———

—

❉

Whirlpool is a registered trademark of Whirlpool USA

aid

Tum b le

fresh

❉❉❉ ❉

❉❉❉ ❉ ❉❉❉ ❉

—

❉

5019 301 06401

Start delay

Spin

Spin Max.

❉❉

Spin

Speed

rpm

max.

1000

max.

1000

max.

max. max.

1000

max.

Black process 45.0° 150.0 LPI

30106401GB.fm Page 2 Friday, June 4, 2010 9:02 AM

The Sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.

CONSUMPTION DATA

Programme

Mixed 40 6.0 73 0.60 1:00 Cotton 95 8.0 82 Cotton 60 8.0 59 1.36 2:20

Cotton with “Eco”

Cotton 40 8.0 77 0.75 2:05

Synthetics 60 3.5 46 Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool/Handwash 40 2.0 45 0.60 0:40

White 40 8.0 77 0.85 2:20

Light colours 40 5.5 70 0.50 1:20

SuperEco 60 8.0 80 1.08 4:00 AquaEco 40 3.0 19 0.45 1:00 Speed 15 30 3.0 30 0.20 0:15

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

Big Items 40 3.0 74 0.75 1:30

***

Dark 40 5.0 45 0.60 1:40

Jeans 40 7.0 95 0.80 2:21

Tem p e rat u r e

(°C)

60 8.0 59 1.04 4:00

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary). Turn the programme selector to the desired programme; the light of the blinks. The can be altered by pressing the “Temperature” button or the “Spin” button .

temperature

and

“Start (Pause)”

spin speed

indicated on the display

button

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. For certain programmes, an option may already be preset; if you want you can deselect it.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Eco” button

• With a modified temperature profile and a prolonged washing duration, the optimum combination of good washing result and lower energy consumption is achieved.

“Soil level” button

• Adapts the programme duration to the soil level of your laundry. Also influences the detergent quantity recommendation when using the “Dosing Aid” button.

= lightly soiled - = normally soiled - = heavily soiled

Not all soil levels are selectable for each programme.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.

Load

Water

(kg)

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very gentle spin.

“Tumble fresh”

• Select this option if you cannot unload the laundry soon after programme end, or if you tend to forget the laundry in your washing machine; it will help to keep your laundry fresh.

• The washing machine will start to tumble the laundry periodically about one hour after programme end.

• The light of the “Tumble fresh” button will blink while this function is active, and the display will show “0:01” with blinking colon.

• The periodic tumbling will last up to approximately 12 hours after the end of your wash programme, and you can stop it at any time by pressing the “Tumble fresh” button; it will last a while until you can open the door.

• After the “tumble fresh” period has run out, the display indicates “End”.

“Spin” button (incl. “Rinse hold” )

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

• If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing. To activate the “Rinse hold”, press the “Spin” button repeatedly until the “Rinse hold” symbol on the display lights up.

- The wash programme stops to “Rinse hold” when the

- To terminate the “Rinse hold” by draining the water,

- To terminate the “Rinse hold” by spinning the laundry, press

- Do not leave the laundry to soak for too long in the “Rinse hold”.

Energy

(l)

(kWh)

2.40 2:10

0.85 1:35

“Rinse hold” symbol on the display blinks; the light of

“Start (Pause)”

without any spinning, press the the “Spin” button to select the desired spin speed and then

“Start (Pause)”

Approx. Programme Duration

(hours : minutes)

button blinks as well.

“Start (Pause)”

to start the spin cycle.

button.

SET A START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature, spin speed and options.

• Press the Start delay button to select one of the delay time steps between 0:30 and 23:00 hours.

•Press the

• The time delay indication disappears when the programme

• If you use the

To cancel the “Start delay” ...before you press the “Start (Pause)” button:

• Press the

...after having started the programme:

“Start (Pause)”

The countdown of the delay time begins; the clock symbol next to the delay time and the colon between hours and minutes blink.

starts and it is replaced by the remaining programme time.

BEFORE pressing the of the selected delay time begins after having pressed the

“Start (Pause)”

separate Instructions for Use concerning the

time to “0:00” - the delay time disappears after a few seconds.

- Press the

disappears from the display. Press start the selected programme immediately.

“Dosing Aid”

“Reset/Drain”

“Start (Pause)”

button .

button: select the delay time

“Dosing Aid”

button for the second time (see

button , or set the start delay

button. The countdown

“Dosing Aid”

button - the delay time

“Start (Pause)”

again to

DETERGENT DOSING RECOMMENDATION

With the “Dosing Aid” button, you can make your washing machine indicate you the recommended detergent quantity for your wash load, depending on the soil level selected and the size of the load.

• Helps to save detergent and protect the environment and also sensitive skin by avoiding detergent overdosing.

• Before you use this function, you must adapt the washing machine to the dosing amounts which are recommended for the detergents you use. Also check if your region’s water hardness corresponds with the water hardness level “soft” of your washing machine - if not adapt it.

• Select programme, options and start delay BEFORE using the “Dosing Aid” button.

For any details, refer to the separate “Dosing Aid” Instructions for Use.

“DOOR OPEN” INDICATION

Before starting a programme, the symbol lights to show that the door can be opened to add more washing. As soon as you press

“Start (Pause)”

door will lock until the end of the programme. Do not try to open it by force; if you have to open it urgently during a running programme, refer to “Reset a running programme before the end”. If you try to start a wash programme and the door is not properly closed, the “Door open” indication will blink.

, the “Door open” indication goes off and the

PROGR AMME START

Open the tap and press the blinking

“Start (Pause)”

“Door open” indication goes off, and the wash symbol lights to indicate that the programme is in process. In some phases, the remaining programme time is newly calculated - if this is the case,

the “6

sense” indication on the display will fade, and the

remaining programme time is replaced by an animation.

“Start (Pause)”

button light becomes constant. The

button ; the

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the “Temperature” and the “Spin” button simultaneously for a few seconds. The “Child lock” symbol

will shortly blink and then light up to indicate that the

child lock is active.

The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock, proceed in the same way as for activating it.

RED FAILURE INDICATIONS

If one of the red failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

• The display shows “End”, and the “Programme finished” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

• If you do not turn the programme selector to the “Off/O” position, all lights of the control panel go out after a few minutes to save energy - only “End” will remain on the display.

DETERGENT OVERDOSAGE INDICA TION

The symbol will light up at the end of the programme if you used too much detergent. Use less detergent next time. If the symbol lights up and the display shows “Fod”, too much foam interrupted the wash process; refer to the “Troubleshooting Guide” in your Instructions for Use.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme, temperature, any options and

3. Press the

“Start (Pause)”

programme. The light blinks.

another spin speed if you want.

“Start (Pause)”

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the

button again. The new

RESET A RUNNING PROGRAMME BEFORE THE END

The

“Reset/Drain”

•Press the

animation appears on the display. The water is drained out; it may last some time until you can open the door.

button cancels a programme before the end.

“Reset/Drain”

button for at least 3 seconds; an

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06401

Black process 45.0° 150.0 LPI