Whirlpool AWOE 8562 INSTRUCTION FOR USE

30106402GB.fm Page 1 Friday, June 4, 2010 9:07 AM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Tempe-

Programme

Mixed

rature

20 - 60 °C

Care

Labels

C D

Max. Load

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load. If soil level

6.0

requires, add oxygen-based stain removers.

- Respect the manufacturer’s recommendations on the care label

Type of w a s h /Note s

}

E. Programme selector

A B

F. “Start (Pause)” button G. “Spin speed” button

(with “Rinse hold” )

H. Programme sequence indicator I. “Reset/Drain” button J. “Start delay” button K. “Temperature” button

Main wash

Yes

L. Display

Softener Pre-

wash

——

❉

Eco Easy

ironing

Intensive

rinse

❉❉❉❉

delay

Spin

speed

Spin

Max.

Spin

Speed

rpm

max.

Detergents and additives Selectable options Start

Pre-

wash

—

Cotton

Synthetics

Delicates

Fabrics

Wool/Handwash

White

Light colours

Colours

Eco

Specials

❉

Dark

SuperEco

AquaEco

Speed 15’

Jeans

Big Items

Rinse & Spin

optional / Yes : dosing required For improved garment care, spin speed is restricted in this programme.

20 - 95 °C

20 - 60 °C

20 - 40 °C

20 - 60 °C

20 - 40 °C

20 - 30 °C 20 - 60 °C

20 - 60 °C

——

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.

8.0

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide (Perlon,

3.5

Nylon) or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

2.5

Woollens, labelled wi th the Woolmark and identified as machine washable, as well as textiles made of silk, linen, wool and viscose marked as handwashable.

2.0

This programme is tested and approved by The Woolmark Company for machine- and handwashable wool. Select spin speed according to the manufacturer's recommendations on the care label.

Normally to heavily soiled and robust white cotton laundry.

8.0

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also

5.5

stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for dark

5.0

garments with this programme.

Normally to heavily soiled and robust underwear, table and bed linen, towels and shirts made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to

8.0

additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount

3.0

for 3kg laundry. Do not use softener.

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

3.0

Refresh programme. Use lowest recommended detergent amount.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.

7.0

Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other artificial fibres;

3.0

sleeping bags, bathmats and similar items. Rinse and intensive spin programme.

8.0

Same as the last rinse and the final spin in the “Cotton” programme.

The Wool/Handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

Yes

❉

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

❉

Yes

❉

——

❉❉❉❉ ❉❉❉

❉❉❉❉ ❉❉❉ ❉❉

❉

———— —

❉ ❉❉❉ ❉❉ ❉

—— —

—— — —

—— —

❉❉❉

—— — —

——

—— —

Whirlpool is a registered trademark of Whirlpool USA

❉❉❉ ❉❉❉

❉❉

❉❉ ❉❉

❉❉

5019 301 06402

max.

1000

max.

1000

max.

max. max.

1000

max.

Black process 45.0° 150.0 LPI

30106402GB.fm Page 2 Friday, June 4, 2010 9:07 AM

The Sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.

CONSUMPTION DATA

Programme

Mixed 40 6.0 73 0.60 1:00 Cotton 95 8.0 82 Cotton

***

Cotton 40 8.0 77 0.75 2:05

Synthetics 60 3.5 46 Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool/Handwash 40 2.0 45 0.60 0:40

White 40 8.0 77 0.85 2:20

Light colours 40 5.5 70 0.50 1:20

Dark 40 5.0 45 0.60 1:40 SuperEco 60 8.0 75 0.95 4:00 AquaEco 40 3.0 19 0.45 1:00

Speed 15’ 30 3.0 30 0.20 0:15

Jeans 40 7.0 95 0.80 2:21

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label (with separa tor in detergent dis penser rem oved for use of powder deterg ent).

Big Items 40 3.0 74 0.75 1:30

Tem p e r a t ure

(°C)

60 8.0 59 1.36 2:20

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary).

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

The display shows the programme duration in hours and minutes as well as the predefined temperature. The

button blinks.

(Pause)”

temperature

“Temperature” button.

case you want to set another spin speed, press the “Spin speed” button .

can be altered by pressing the

to the desired programme.

spin speed

lights up. In

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and option is not possible, the lights switch off automatically. Unsuitable combinations of options are deselected automatically. For certain programmes, an option may already be preset; you can deselect it if you want.

“Prewash” button

• Only for heavily soiled loads (f o r example sand, granular dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Eco” button

• With a modified temperature profile and a prolonged washing duration, the optimum combination of good washing result and lower energy consumption is achieved.

“Start

Load

Water

(kg)

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very gentle spin.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies.

“Spin speed” button (incl. “Rinse hold” )

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is cancelled, and the water is drained out only. However, intermediate spin phases remain during rinse.

•If you select last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

-Select

- Do not leave the laundry to soak in the rinse hold for too long.

- The programme stops to “Rinse hold” when the “Rinse

- To terminate the “Rinse hold” by draining the water, without

- To terminate the programme by spinning the laundry, press the

Energy

(l)

(kWh)

2.40 2:10

0.85 1:35

“Rinse hold”

later time or if you want to drain only.

hold” light in the programme sequence indicator is on. The

“Start (Pause)”

any spinning, press the

“Spin speed” button to select the desired spin speed and then the

“Start (Pause)”

Approx. Programme Duration

(hours : minutes)

, the laundry remains in the

if you want to postpone spinning to a

button light blinks.

“Start (Pause)”

button to start the spin cycle.

button .

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select a delay time up to 23 hours. The light of the

•Press the

• As soon as the programme starts, the start delay on the display

• Once having pressed the

To cancel the “Start delay” ...before you press “Start (Pause)” :

• Turn the programme selector to another position or press the

...after having pressed “Start (Pause)” :

•Press

“Start (Pause)”

the delay time begins. The light of the

is on. The light of the start delay button will keep blinking

until the programme starts.

is replaced by the remaining programme time, and the light of the “Start delay” button goes off.

number of hours preselected can be changed by pressing and holding the “Start delay” button.

“Reset/Drain”

“Start (Pause)”

the display. Press selected programme immediately.

“Start (Pause)”

button . The countdown of

“Start (Pause)”

button .

- the delay time disappears from

“Start (Pause)”

button blinks.

“Start (Pause)”

button , the

again to start the

button

PROGR AMME START

Open the tap and press blinking and is on. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,

an animation appears on the display

“Start (Pause)”

. The light stops

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the 2 buttons marked with the key symbol simultaneously for at least 3 seconds. A key-like symbol will shortly appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active child lock, the display will briefly show the key-like symbol. The programme setting cannot be changed anymore. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock:

• Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use. If the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap. If the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned. In the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• The display shows “End” and the “Door open” indi cation lights.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press

2. Select the new programme, temperature, any options and

3. Press

“Start (Pause)”

light blinks.

another spin speed if you want.

“Start (Pause)”

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

to pause the programme. The

again. The light is on, and the

RESET A RUNNING PROGRAMME BEFORE THE END

The

“Reset/Drain”

the end.

•Press the seconds. “rES” appears on the display. The water is drained out; it may last a while until you can open the door.

button cancels a programme before

“Reset/Drain”

button for at least 3

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06402

Black process 45.0° 150.0 LPI

Whirlpool AWOE 8562 INSTRUCTION FOR USE

Specifications and Main Features

Frequently Asked Questions

User Manual