Whirlpool AWOE 8514 INSTRUCTION FOR USE

30106472GB.fm Page 1 Friday, June 10, 2011 4:10 PM

GB PROGRAMME CHART

1. Programme selector

2. “Temperature” button

3. “Spin” button with “Rinse hold”

4. “Start delay” button

5. “Soil level” button

6. “Favourites” button

7. “Start (Pause)” button

8. “Reset/Drain” button

2 3

465

Programme sequence indication

“Soil level” indications

“Start delay” indication

“Child lock” indication

“Detergent overdosage” indication

Failure indications

(depending on the model)

Max.

Programme

Mixed cold - 60 °C 6.0

Cotton cold - 95 °C 8.0

Synthetics cold - 60 °C 3.5

Delicates cold - 40 °C 2.5

Fabrics

Wool/

Handwash

White cold - 60 °C 8.0

Light

colours

Colours

Dark cold - 60 °C 5.0

Super Silent cold - 60 °C 8.0

AquaEco cold - 40 °C 3.0

Eco

Speed 15 cold - 30 °C 3.0

Bedlinen cold - 95 °C

Big Items cold - 60 °C 3.0

Specials

Rinse & Spin

❉: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Temperature

cold - 40 °C 2.0

cold - 60 °C 5.5

——

Care

Labels

Load

3.5

8.0

Ty pe of wa s h /N o t es

Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.

Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc.) or their blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk, linen, wool and viscose marked as handwashable.

This programme is tested and approved by The Woolmark Company for machine- and handwashable wool. Select spin speed according to the manufacturer’s recommendations on the care label.

Normally to heavily soiled and robust white cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a special liquid detergent for dark garments with this programme.

Robust laundry made of cotton or linen.

Programme optimized for silent washing and spinning, for example during the night. If you want to avoid completely noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay ” accordingly.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount for 3kg laundry. Do not use softener.

Briefly worn clothing made of cotton, artificial fibres and blends with cotton.

Refresh programme. Use lowest recommended detergent amount.

White and coloured bedlinen made of cotton and synthetic fibres, or blends of both.

Reduces microbes and gently cleans, also delicate bedlinen, A thorough rinse phase helps to prevent detergent and pollen residues. Prefer powder detergent for this programme.

Blankets made of synthetic fibres; bedcovers filled with feathers, polyester or other artificial fibres; sleeping bags, bathmats and similar items.

Rinse and intensive spin programme.

Same as the last rinse and the final spin in the “Cotton” programme.

- Respect the manufacturer’s recommendations on the care label

The wool/handwash cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

Tu m b l e

fresh

Favourites Start

delay

Spin Max.

Detergents and additives

Prewash Main

Softener Clean + Rapid Soil

wash

Selectable options

Prewas h Intensive

level

rinse

Ye s

—

❉

—

❉

—

❉

❉ ——❉ — ❉❉ ❉❉ ❉

Ye s

❉❉❉❉❉❉❉❉❉ ❉

Ye s

❉❉❉❉❉❉❉❉❉ ❉

Ye s

❉ ——❉❉ — ❉❉❉ ❉

Ye s

❉ ——❉ ——❉❉❉ ❉

Ye s

❉❉— ❉ — ❉❉ ❉❉ ❉

Ye s

❉❉— ❉❉ — ❉❉❉ ❉

Ye s

❉ — ❉❉ ❉ ❉ ❉ ❉ ❉ ❉

Ye s

❉ ——❉ — ❉❉ ❉❉ ❉

Ye s

——————❉❉❉ ❉

Ye s

❉ ———— — ❉❉❉ ❉

Ye s

❉ ——❉❉ ❉ ❉ ❉ ❉ ❉

Ye s

❉ ——❉❉ ❉ ❉ ❉ ❉ ❉

—— ❉ ———— ❉❉ ❉❉ ❉

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06472

Spin

Speed

rpm

max.

1000

max.

1000

max.

1000

max.

Black process 45,0° 150,0 LPI

30106472GB.fm Page 2 Friday, June 10, 2011 4:10 PM

CONSUMPTION DATA

Programme

Mixed 40 6.0 67 0.58 1:00 — Cotton 95 8.0 82** 2.40 2:20 — Cotton* 60 8.0 59 0.98 4:00 2:20 Cotton* 60 4.0 42 0.78 3:10 Cotton 40 8.0 78 0.85 3:15 2:05 Cotton* 40 4.0 42 0.63 3:00

Synthetics 60 3.5 48** 0.95 1:55 1:14 Synthetics 40 3.5 45 0.53 1:40 0:59

Delicates 30 2.5 60 0.40 0:45 —

Wool/Handwash 40 2.0 49 0.63 0:40 —

White 40 8.0 77 0.80 2:20 —

Light colours 40 5.5 70 0.50 1:20 —

Dark 40 5.0 45 0.50 1:40 1:15

Super Silent 60 8.0 75 0.95 4:00 —

AquaEco 40 3.0 19 0.45 1:00 — Speed 15 30 3.0 30 0.20 0:15 —

Bedlinen 60 3.5 60 1.30 2:00 —

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.

* Reference programmes for Energy Label. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. *** Automatic adaptation of programme duration after detection of wash load.

Big Items 40 3.0 74 0.75 1:30 —

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

Te m p e r a t ur e

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme. The light of the “Start (Pause)” button blinks. The temperature and spin speed indicated on the display can be altered by pressing the “Temperature” button or the “Spin” button .

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. For certain programmes, an option may already be preset. If you want you can deselect it.

“Clean +” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• May prolong the programme by up to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!

“Rapid” button

• Enables quicker washing by shortening the programme duration.

• Recommendable for only lightly soiled laundry.

Load

(kg)

Wat er

Energy

(l)

(kWh)

“Soil level” button

• Adapts the programme duration to the soil level of your laundry.

= lightly soiled - = normally soiled - = heavily soiled

Not all soil levels are selectable for each programme.

“Prewash” button

• Adds an additional prewash cycle to the wash programme selected; prolongs the programme by about a quarter of an hour.

• Recommended for heavily soiled laundry (e.g. with sand or granular dirt).

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.

“Tumble fresh”

• Select this option if you cannot unload the laundry soon after programme end, or if you tend to forget the laundry in your washing machine. It will help to keep your laundry fresh.

• The washing machine will start to tumble the laundry periodically about one hour after programme end.

• The light of the “Tumble fresh” button will blink while this function is active, and the display will show “0:01” with blinking colon.

• The periodic tumbling will last up to approximately 12 hours after the end of your wash programme, and you can stop it at any time by pressing the “Tumble fresh” button. It will last a while until you can open the door.

• After the “tumble fresh” period has run out, the display indicates “End”.

Approx. Programme Duration

(hours : minutes)

without “Rapid” with “Rapid”

***

“Spin” button (incl. “Rinse Hold” )

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled, and the water is drained out only. However, intermediate spin phases remain during rinse.

• If you select “Rinse hold” , the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colours from changing. To activate the “Rinse hold”, press the “Spin” button repeatedly until the “Rinse hold” symbol on the display lights up.

- The wash programme stops to “Rinse hold” when the

“Rinse hold” symbol on the display blinks. The light of “Start (Pause)” button blinks as well.

- To terminate the “Rinse hold” by draining the water,

without any spinning, press the “Start (Pause)” button.

- To terminate the “Rinse hold” by spinning the laundry, press

the “Spin” button to select the desired spin speed and then “Start (Pause)” to start the spin cycle.

- Do not leave the laundry to soak for too long in the “Rinse hold”.

SET A START DELAY

Th e “S tar t de lay ” al low s to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature, spin speed and options.

• Press the Start delay button to select a delay time up to 23 hours.

• Press the “Start (Pause)” button . The countdown of the delay time begins. The clock symbol next to the delay time and the colon between hours and minutes blink.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

To cancel the “Start delay” ...before you press the “Start (Pause)” button:

• Press the “Reset/Drain” button , or set the start delay time to “0:00” - the delay time disappears after a few seconds.

...after having started the programme:

- Press the “Start (Pause)” button - the delay time

disappears from the display. Press “Start (Pause)” again to start the selected programme immediately.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used a gain by just pushing on e button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the “Favourites” button for at least 3 seconds. The lamp over “Favourites” briefly blinks and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, briefly push the “Favourites” button and start by pushing “Start (Pause)” . If you want to replace the saved programme setting by another one, proceed as already described above.

“DOOR OPEN” INDICATION

Before starting a programme, the symbol lights to show that the door can be opened to add more washing. As soon as you press “Start (Pause)”, the “Door open” indication goes off and the door will lock until the end of the programme. Do not try to open it by force. If you have to open it urgently during a running programme, refer to “Reset a running programme before the end”. If you try to start a wash programme and the door is not properly closed, the “Door open” indication will blink.

PROGRAMME START

Open the tap and press the “Start (Pause)” button . The blinking “Start (Pause)” button light becomes constant. The “Door open” indication goes off, and the wash symbol lights to indicate that the programme is in process. In some phases, the remaining programme time is newly calculated - if this is the case,

sense” indication on the display will fade, and the

the “6 remaining programme time is replaced by an animation.

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the “Temperature” and the “Spin” button simultaneously for a few seconds. The “Child lock” symbol

will briefly blink and then light up to indicate that the

child lock is active.

The programme setting cannot be changed anymore. The only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock, proceed in the same way as for activating it.

FAILURE INDICATIONS

If one of the failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

• The display shows “End”, and the “Programme finished” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

• If you do not turn the programme selector to the “Off/O” position, all lights of the control panel go out after a few minutes to save energy - only “End” will remain on the display.

DETERGENT OVERDOSAGE INDICATION

The symbol will light up at the end of the programme if you used too much detergent. Use less detergent next time. If the symbol lights up and the display shows “Fod”, too much foam interrupted the wash process. Refer to the “Troubleshooting Guide” in your Instructions for Use.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start (Pause)” button to pause the

programme. The light blinks.

2. Select the new programme, temperature, any options and

another spin speed if you want.

3. Press the “Start (Pause)” button again. The new

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE END

The “Reset/Drain” button cancels a programme before the end.

•Press the “Reset/Drain” button for at least 3 seconds.

An animation appears on the display. The water is drained out. It may last some time until you can open the door.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06472

Black process 45,0° 150,0 LPI