Whirlpool AWO/D AS 128 W, AWO/D AS 148 W INSTRUCTION FOR USE

30106077GB.fm Page 1 Monday, July 30, 2007 11:00 AM

GB PROGRAMME CHART

A. “On/Off” button B. Programme selection buttons C. Option buttons D. “Temperature” button E. “Start delay” button F. “Variable spin” button G. “Start/Pause” button H. “Drain/Reset (3sec)” button I. Display

Programme

Cotton

(Anti-bacterial)

Synthetics

Tempe-

rature

20 - 95 °C

20 - 60 °C

Care

Labels

Max

Load

- For temperature selection, respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria,

8.0

ensuring sanitization of your laundry . The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov.

2001. Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

3.5

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Type of wash/Notes

Detergents and additives Special options Start

Pre-

wash

❉

Main wash

Yes

J. Programme sequence indication

}

K. “Door open” indication L. “Child lock” indication

Your washing machine is equipped with

automatic safety functions which detect

K M

and diagnose faults at an early stage and react appropriately, e.g.:

D E F

M. “Water tap closed” indication N. “Clean pump” indication O. “Service” indication

Softener Big

items

—

❉

Steam

stain

removal

Steam Saniti-

sation

Pre-

Intensive

wash

rinse

❉❉❉❉❉❉❉

Rinse

hold

delay

❉❉ ❉ ❉❉❉❉❉❉

Variable

spin

Spin

Max Spin

Speed

rpm

max.

1000

Daily load

Quick wash

(30 min)

Delicates

Handwash &

Wool

Steam Refresh

Spin

Rinse & Spin

Drain

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Only selectable within the temperature range of 40 to 60°C.

20 - 60 °C

20 - 30 °C 20 - 40 °C

20 - 40 °C

20 - 60 °C

—

—— ——

———

Slightly to normally soiled textiles made of cotton and/or synthetics.

6.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends

6.0

with cotton. Curtains and delicate clothing, dresses skirts, shirts and blouses.

2.5

Textiles made of silk, linen, wool and viscose marked as “handwashable”, or woollens labelled with the Woolmark and identified as machine washable.

2.0

This programme (40°C) is tested and approved by The Woolmark Company for machine washable and handwashable wool.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy

8.0

rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Clean and dry laundry items made of cotton and/or synthetics which were already used.

Refreshes, reduces smells, moderates creasing and makes the items ready to wear

1.0

or use within 20 minutes. After programme end, immediately put the laundry on hangers for 10 minutes before using. During this programme “St” appears on the display.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

8.0

programme. Same as the last rinse and the final spin in the “Cotton” programme.

8.0

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. Press “Drain/Reset (3sec)” and then “Start/Pause” to start the “Drain” programme.

— —

❉

—

Yes

Yes Yes

Yes

—— ——

❉

—— ———

❉

—— —

❉

—— ———

❉

—— ——

❉

———— — ————

———— — ———— ——

—— ——

❉

———— — ———————

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.

M0702

❉❉❉❉

❉❉❉

—

❉❉❉ ❉❉❉

❉❉❉❉

❉

❉❉

❉❉❉❉

Whirlpool is a registered trademark of Whirlpool USA

max.

1000

400

max.

——

max. max.

5019 301 06077

Black process 45.0° 100.0 LPI

30106077GB.fm Page 2 Monday, July 30, 2007 11:00 AM

CONSUMPTION DATA

Programme

Cotton (Anti-bacterial) 95 8.0 82

Cotton

***

Cotton 40 8.0 77 0.85 2:05 Synthetics 60 3.5 48 Synthetics 40 3.5 44 0.55 1:20 Daily load 40 6.0 79 0.70 1:00

Quick wash (30 min) 30 6.0 72 0.35 0:30

Delicates 30 2.5 60 0.45 0:50 Handwash / Wool 40 2.0 45 0.65 0:40 Handwash / Wool 30 2.0 45 0.35 0:36

Steam Refresh — 1.0 0.5 0.20 0:10

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

Tem p era t ure

(°C)

60 8.0 69 1.36 2:20

60 8.0 75 0.95 4:00

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Push the

2. Select the

3. The

“On/Off”

signals that the washer is switched on. corresponding programme button; it is marked by a

blue light.

temperature

display can be altered by pressing the “Temperature” button or the “Variable spin” button.

button . The blue light circle

desired programme

and

spin speed

by pushing the

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Big Items” button

• Select this option for washing big lau ndry items such as blankets made of synthetic fibres, bed covers filled with feathers or artificial fibres, sleeping bags , bathmats and similar.

“Steam stain removal” button

• Treats the laundry with hot steam during the wash cycle in order to help removing stains.

• Selectable for laundry made of cotton and/or synthetics within temperature range of 40 to 60°C.

“Steam sanitisation” button

• Eliminates bacteria and helps sanitizing the laundry.

• Appropriate for cotton and/or synthetic laundry items with care label within temperature range of 40 to 60°C.

• Prolongs the programme by approx. half an hour to an hour, depending on the load size.

Load

(kg)

indicated on the

Water

Energy

(l)

(kWh)

2.40 2:10

0.95 1:35

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to soak for too long.

The programme stops to “Rinse hold” at the time

Note:

the “Rinse hold” symbol on the display lights up. The blue light under the

Terminate the “Rinse hold” option:

• P ress the will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, push the

“Drain/Reset (3sec)”

button to start the Drain programme.

Pause”

Approx. Programme Duration

(hours : minutes)

“Start/Pause”

button ; the programme

button and then the

button flashes.

“Start/

“Variable spin” button

• Every programme has a predefined spin speed.

• P ress the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature, spin speed and options.

• P ress the “Start delay” button to select the delay time up to 23 hours.

• Press the The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes flash.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the the number of hours preselected can be reduced by pressing and holding the “Start delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start delay” ..before you press the “Start/Pause” button:

• Select another programme or pre ss the

(3sec)”

..after having pressed the “Start/Pause” button:

• Press the seconds - the start delay time disappears from the display.

“Start/Pause”

button.

“Drain/Reset (3sec)”

button .

“Start/Pause”

button for at least 3

button ,

“Drain/Reset

PROGR AMME START

Open the tap and press the The blue light under the The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

“Start/Pause”

button .

button is on.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

CHILD LOCK

You can lock the buttons of the control panel against improper use (e.g. by children).

• P ress the temperature and the spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up.

• To unlock the buttons again: proceed in the same way.

RED INDICATIONS ON THE DISPLAY

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

PROGRAMME END

• The symbols of the programme sequence indicator

are dark, and the “Door open” symbol lights up.

1. Switch the machine off by pushing

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

“On/Off”

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

programme. The light flashes.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start/Pause”

button to pause the

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Drain/Reset (3sec)”

before the end.

• Press the

seconds. Any existing water is drained out before the door can be opened. Caution! The washing might still be hot.

“Drain/Reset (3sec)”

Whirlpool is a registered trademark of Whirlpool USA

button cancels a programme

button for at least 3

5019 301 06077

Black process 45.0° 100.0 LPI