Whirlpool AWO/D 8840, AWO/D 8830 INSTRUCTION FOR USE

30106091GB.fm Page 1 Wednesday, September 12, 2007 6:16 PM

GB PROGRAMME CHART

A. “On/Off” button B. Programme selection buttons C. Option buttons D. “Favourite” button E. “Temperature” button F. “Start delay” button G. “Variable spin” button H. “Start/Pause” button I. “Drain/Reset” button J. Display

Tempe-

Programme

Cotton /

Antibacterial

Cotton

Synthetics

rature

70 - 95 °C 50 - 60 °C 20 - 40 °C

20 - 60 °C

Care

Labels

D E F G

Max

Load

- For temperature selection, respect the manufacturer’s

recommendations on the care label

Normally to heavily soiled bed linen, table linen and

6.0

underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your

6.0

laundry . The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697

5.0

standard of Nov. 2001. Normally soiled blouses, shirts, overalls etc. made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon)

2.5

or blends with cotton.

Type of wash/Notes

Detergents and additives Special options Start Pre-

wash

❉

}

Main

Softener Eco Easy

wash

Yes

❉❉ ❉ ❉❉❉

L N

}

ironing

K. Programme sequence indication

L. “Door open” indication M. “Buttons locked” indication

Your washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

N. “Water tap closed” indication O. “Clean pump” indication P. “Service” indication

Spin

Variable

spin

❉

Pre-

wash

Intensive

rinse

Rinse

hold

delay

❉

Max Spin

Speed

rpm

max.

1000

Daily load

Quick wash

(30 min.) Delicates

Wool

Handwash

Jeans

Spin

Rinse & Spin

Drain

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Do not use liquid detergent when activating the “Start Delay”.

Do not use liquid detergent for the main wash when activating the “Prewash” option.

20 - 60 °C

20 - 30 °C

20 - 40 °C

20 - 60 °C

—— ——

———

3.0

1.5

1.0

5.0

6.0

Slightly to normally soiled textiles made of cotton and/ or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

Same as the last rinse and the final spin in the “Cotton” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. Press “Reset/Drain” and then “Start/Pause” to start the “Drain” programme.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.

—

❉

—

❉

Yes

—

❉

————

❉

——

❉

————

❉

————

❉

❉❉

❉

—

❉

❉❉

❉

—

❉

—

❉

————— ——— ——

———

❉

❉❉❉ ❉

❉

❉ ❉

❉

❉❉

max.

1000

400

max. max.

max.

————— ——————

Whirlpool is a registered trademark of Whirlpool USA

M0619

5019 301 06091

Black process 45.0° 100.0 LPI

30106091GB.fm Page 2 Wednesday, September 12, 2007 6:16 PM

CONSUMPTION DATA

Programme

Temperature

(°C)

Cotton / Antibacterial 95 6.0 59

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

1.90 2:00

Cotton 60 6.0 56 1.14 2:10

Cotton with “Eco”

***

60 6.0 51 1.02 2:20

Cotton 40 5.0 53 0.65 2:00

Synthetics 60 2.5 50

0.80 1:35

Synthetics 40 2.5 46 0.40 1:20 Daily load 40 3.0 41 0.50 1:00

Quick wash (30 min.) 30 3.0 41 0.30 0:30

Delicates 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Jeans 40 5.0 70 0.65 2:15

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Push the

2. Select the

3. The

“On/Off”

signals that the washer is switched on. corresponding programme button; it is marked by a

blue light.

temperature

display can be altered by pressing the “Temperature” button or the “Variable spin” button .

button . The blue light circle

desired programme

and

spin speed

by pushing the

indicated on the

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Prewash” button

• Only for heavily so i led lo ads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is pa rt i cul ar ly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is part i cul ar ly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rins e ho ld”, do not le av e the la undry to soak for too long.

The programme stops to “Rinse hold” at the

Note:

time the “Rinse hold” symbol on the display lights up. The blue light under the flashes.

Terminate the “Rinse hold” option:

• Press the will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, push the “Drain/ Reset” button and then the button to start the Drain programme.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Start/Pause”

button ; the programme

“Start/Pause”

button

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the button for at least 3 seconds. The lamp next to

“Favourites”

programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the button and start by pushing

If you want to replace the saved programme setting by another one:

• Push the programme button, select temperature, spin speed and options as desired and then press and hold the

“Favourites”

previously saved programme setting will be replaced by the new one.

shortly flashes and then lights up - the

“Start/Pause”

button for at least 3 seconds. The

“Favourites”

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature, spin speed and options.

• Press the “Start Delay” button to select the delay time up to 23 hours.

• Press the The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes flash.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start Delay” ..before you press the “Start/Pause” button:

• Select another programme or press the

Reset”

..after having pressed the “Start/Pause” button:

• Press the disappears from the display.

“Start/Pause”

button.

“Drain/Reset”

button .

“Start/Pause”

button - the start delay time

button ,

“Drain/

PROGR AMME START

Open the tap and press the The blue light under the The programme sequence indicator shows the current programme phase, running from top to bottom through Wash, Rinse, Spin/Drain.

“Start/Pause”

button .

button is on.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

LOCK BUTTONS

You can lock the buttons of the control panel against improper use (e.g. by children).

• Press the temperature and the spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up.

• To unlock the buttons again: proceed in the same way.

RED INDICATIONS ON THE DISPLAY

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

PROGRAMME END

• The symbols of the programme sequence indicator

are dark, and the “Door open” symbol lights up.

1. Switch the machine off by pushing

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

“On/Off”

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

programme. The light flashes.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start/Pause”

button to pause the

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Drain/Reset”

the end.

• Press the

Any existing water is drained out before the door can be opened.

button cancels a programme before

“Drain/Reset”

Whirlpool is a registered trademark of Whirlpool USA

button for at least 3 seconds.

5019 301 06091

Black process 45.0° 100.0 LPI