Whirlpool AWO/D 8717 GULDSEGL INSTRUCTION FOR USE

30106126GB.fm Page 1 Tuesday, November 27, 2007 4:49 PM

GB PROGRAMME CHART

A. “On/Off” button B. Programme selection buttons C. Option buttons D. “Favourite” button E. “Temperature” button F. “Start delay” button G. “Variable spin” button H. “Start/Pause” button I. “Drain/Reset” button J. Display

Tempe-

Programme

Cotton /

Antibacterial

Cotton Bomuld

Synthetics Syntetisk

Daily load Dagligvask

Quick wash Quickvask

Delicates Skåneprogram

Wool Uld

Handwash Håndvask

Jeans Jeans

Spin Centrifugering

Rinse & Spin

Drain Tømning

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Do not use liquid detergent when activating the “Start Delay”.

Do not use liquid detergent for the main wash when activating the “Prewash” option.

Bomuld

Skyl &

Centrifugering

rature

70 - 95 °C

20 - 60 °C

20 - 30 °C

20 - 40 °C

20 - 60 °C

—— ——

———

Care

Labels

Max

Load

7.0

3.5

5.0

2.5

2.0

7.0

D E F G

Type of wash/Notes

- For temperature selection, respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

Same as the last rinse and the final spin in the “Cotton” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. Press “Drain/Reset” and then “Start/Pause” to start the “Drain” programme.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.

K. Programme sequence indication

}

Detergents and additives Special options Start

Pre-

Main

wash

❉

Yes

—

Yes

—

Yes

—

Yes

—

Yes

❉

————— — — — ——

KL N

}

Softener Eco

Øko

Strygelet

L. “Door open” indication M. “Buttons locked” indication

Your washing machine is equipped with automatic safety functions which detect and

diagnose faults at an early stage and react appropriately, e.g.:

N. “Water tap closed” indication O. “Clean pump” indication P. “Service” indication

Easy

ironing

Pre-

wash

For-

vask

Intensive

rinse

Ekstra

skyl

Rinse

hold

Skylle-

stop

delay

Udskudt

start

)

Variable

spin

Centr.

❉❉❉ ❉ ❉ ❉ ❉ ❉

—

❉

————

❉

——

❉

————

❉

————

❉

❉❉❉ ❉

—

❉

❉❉❉❉

❉❉❉

—

❉

❉❉❉

—

❉❉❉

❉❉

———

❉

❉❉❉❉

————— — — —— — —

Whirlpool is a registered trademark of Whirlpool USA

M0512

5019 301 06126

Spin

Max Spin

Speed

rpm

max.

1000

max.

1000

400

max. max. max.

Black process 45.0° 100.0 LPI

30106126GB.fm Page 2 Tuesday, November 27, 2007 4:49 PM

CONSUMPTION DATA

Programme

Cotton / Antibacterial 95 7.0 70

Cotton 60 7.0 65 1.33 2:10

Cotton with “Eco”

Cotton 40 7.0 65 0.75 2:05 Synthetics 60 3.5 48 Synthetics 40 3.5 44 0.55 1:20 Daily load 40 5.0 66 0.60 1:00

Quick wash 30 5.0 60 0.30 0:30

Delicates 30 2.5 60 0.45 0:50

Wool 40 2.0 60 0.65 0:45

Handwash 40 2.0 45 0.65 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

Jeans 40 7.0 85 0.75 2:20

***

Tem p e ratu r e

(°C)

60 7.0 60 1.19 2:20

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Push the

2. Select the

3. The

“On/Off”

signals that the washer is switched on. corresponding programme button; it is marked by a

blue light.

temperature

display can be altered by pressing the “Temperature” button or the “Variable spin” button.

button . The blue light circle

desired programme

and

spin speed

by pushing the

indicated on the

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Prewash” button

• Only for heavily soiled load s (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

Load

Water

(kg)

• Do not use liquid detergent for the main wash when

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is parti cularly suitable for areas with very

“Rinse hold” button

• The laundry remains in the last rinse water without

• This option is particularly recommended for the

• It is particularly useful if you want to postpone spinning

• If you select “Rinse hold”, do not leav e the laundry to

Terminate the “Rinse hold” option:

• Press the

• If you do not wish to spin the clothes, push the “Drain/

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

Energy

(l)

(kWh)

2.10 2:10

0.95 1:35

activating the Prewash option.

soft water or for washing baby linen, and helps people with allergies.

progressing to the final spin cycle to avoid creasing and prevent colours from changing.

programmes “Synthetics”, “Daily load” and “Delicates”. to a later time, or if you want to drain only. soak for too long.

The programme stops to “Rinse hold” at the time

Note:

the “Rinse hold” symbol on the display lights up. The blue light under the

will terminate automatically with the final spin cycle for the present wash programme.

Reset” button and then the button to start the Drain programme.

cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Start/Pause”

Approx. Programme Duration

(hours : minutes)

“Start/Pause”

button flashes.

button ; the programme

“Start/Pause”

SAVE YOUR FAV OURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the button for at least 3 seconds. The lamp next to

“Favourites”

programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the button and start by pushing

If you want to replace the saved programme setting by another one:

• Push the programme button, select temperature, spin speed and options as desired and then press and hold the

“Favourites”

saved programme setting will be replaced by the new one.

shortly flashes and then lights up - the

“Start/Pause”

button for at least 3 seconds. The previously

“Favourites”

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature, spin speed and options.

• Press the “Start Delay” button to select the delay time up to 23 hours.

• Press the The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes flash.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start Delay” ..before you press the “Start/Pause” button :

• Select another programme or press the

Reset”

..after having pressed the “Start/Pause” button:

• Press the

- the start delay time disappears from the display.

“Start/Pause”

button.

“Drain/Reset”

button .

“Start/Pause”

button for at least 3 seconds

button ,

“Drain/

PROGR AMME START

Open the tap and press the The blue light under the The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

“Start/Pause”

button .

button is on.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

LOCK BUTTONS

You can lock the buttons of the control panel against improper use (e.g. by children).

• Press the temperature and the spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up.

• To unlock the buttons again: proceed in the same way.

RED INDICATIONS ON THE DISPLAY

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

PROGRAMME END

• The symbols of the programme seque n c e indic at or

are dark, and the “Door open” symbol lights up.

1. Switch the machine off by pushing

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

“On/Off”

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

programme. The light flashes.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start/Pause”

button to pause the

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Drain/Reset”

the end.

• Press the

seconds. Any existing water is drained out before the door can be opened.

button cancels a programme before

“Drain/Reset”

Whirlpool is a registered trademark of Whirlpool USA

button for at least 3

5019 301 06126

Black process 45.0° 100.0 LPI

Whirlpool AWO/D 8717 GULDSEGL INSTRUCTION FOR USE

Specifications and Main Features

Frequently Asked Questions

User Manual