Whirlpool AWO/D 8409, AWO/D 8419 INSTRUCTION FOR USE

30106296GB.fm Page 1 Thursday, June 4, 2009 12:42 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Max

Programme

Cotton /

Antibacterial

40 - 60 - 95 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Lingerie 30’

30 °C

Rinse & Spin

Spin Centrif.

Drain Desagüe/Drenag.

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Algod.

40 - 60 - 95 °C

60 °C

Sintéticos

30 - 40 - 60 °C

Delicados

30 - 40 °C

40 °C

30 °C

Lana/lã

Frío - 40 °C

A mano/40’

mão

40 °C

Lingerie 30’

30 °C

Aclar./enx.

& Centrif.

Care

Labels

Load

- For temperature selection, respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

8.0

Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and/or linen.

Offers highest economy in energy consumption by prolonged wash duration. Ideal to

8.0

be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.

— —

——

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

3.0

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.

4.0 Slightly to normally soiled textiles made of cotton and/or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and

4.0

blends with cotton. Only woollens, labelled with the Woolmark and identified as machine

1.0

washable.

1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. This programme is particularly suitable to treat delicate lingerie (use of a

1.0

laundry net strongly recommended).

8.0

Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

8.0

programme. Water is drained only without any spinning.

C D

Type of wash/Notes

}

E. Programme selector F. “Start (Pause)” button

A B

G. “Variable spin” button H. Programme sequence indicator

and Start delay indicators

Detergents and additives Special options

Pre-

Main

wash

❉

—

❉

—

Softener

wash

Yes

—— —— —

—— —

Start

delay

Inicio

diferido

❉❉❉❉ ❉ ❉ ❉

❉❉

❉❉❉❉ ❉ ❉ ❉

❉❉❉

❉❉

❉❉ ❉❉

❉ ❉

I. “Reset” button J. “Start delay” button

Pre-

wash

Prelav.

——

Intensive

rinse

Aclar./enx.

Intensivo

❉

———

——

❉❉❉

—— — —

—— — — ——

❉

—— — — —— — — ——

Whirlpool is a registered trademark of Whirlpool USA

Easy

ironing

—

Variable

spin

Centrif.

Max Spin

Speed

rpm

max.

❉

max.

1000

max.

1000

max.

400

max. max.

❉

❉ ❉ ❉

5019 301 06296

Black process 45.0° 150.0 LPI

30106296GB.fm Page 2 Thursday, June 4, 2009 12:42 PM

CONSUMPTION DATA

Programme

Cotton /Antibacterial 95 8.0 82

Cotton

Cotton 40 8.0 77 0.75 2:05

SuperEco 60 8.0 75 0.95 4:00 Synthetics 60 3.0 46 Synthetics 40 3.0 42 0.40 1:20

Delicates 30 1.5 60 0.50 0:45 Daily load 40 4.0 48 0.50 1:00

Quick wash 30 4.0 48 0.25 0:30

Wool 40 1.0 60 0.55 0:45

Handwash 40 1.0 45 0.55 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* **

Lingerie 30 1.0 45 0.45 0:36

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.

Temp e r ature

(°C)

60 8.0 64 1.36 2:30

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

Close the door and turn the programme selector to the desired programme and temperature. The indication lamp next to the

“Start (Pause)”

button flashes.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the prewash option.

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

Load

(kg)

Water

(l)

• Selectable for programmes “Cotton ” and “Synthetics”; choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive f or stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• P rolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain re movers an d bleaches on oxygen basis.

not be used!

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water , washing baby linen and helping people with allergies.

“Easy ironing” button

• Helps to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

Energy

(kWh)

2.40 2:10

0.80 1:35

Approx. Programme Duration

(hours : minutes)

Chlorine or perborate bleaches must

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• P ress the “Start delay” button to select the delay time by 1, 3, 6, 9 or 12 hours.

• Press the The indication next to the “Start delay” button flashes and goes off when the programme starts.

• Once having pressed the countdown of the time delay begins. When the programme starts, the start delay indicator light goes off and is replaced by the programme sequence indication.

•After the the number of hours preselected can be reduced by pressing again the “Start Delay” button.

To cancel the “Start delay” ..before you press the “Start (Pause)” button:

• Turn the programme selector to another position or press the

..after having pressed the “Start (Pause)” button:

• Press the start delay indicator light goes out.

“Start (Pause)”

“Reset”

button.

“Start (Pause)”

button has been pressed,

button.

button for at least 3 seconds - the

button, the

PROGR AMME START

Open the tap and press the indication lamp next to the up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

When the programme phase is finished, the corresponding indication goes out.

“Start (Pause)”

button. The

button lights

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start (Pause)”

button to pause the

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. Any

“Reset”

existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06296

Black process 45.0° 150.0 LPI