Whirlpool AWO/D 8228, AWO/D 8208 W INSTRUCTION FOR USE
30106095GB.fm Page 1 Thursday, September 20, 2007 6:02 PM
GB PROGRAMME CHART
A. “On/Off” button
B. Programme selection buttons
C. Option buttons
D. “Favourite” button
E. “Temperature” button
F. “Start delay” button
G. “Variable spin” button
H. “Start/Pause” button
I. “Drain/Reset” button
J. Display
Programme
Cotton
Cotton
Synthetics
Bawełniane
Bawełniane
Syntetyczne
Tempe-
rature
70 - 95 °C
50 - 60 °C
20 - 40 °C
20 - 60 °C
Care
Labels
D E F G
Max
Load
- For temperature selection, respect the manufacturer’s
kg
recommendations on the care label
7.0
Normally to heavily soiled bed linen, table linen and
7.0
underwear, towels, shirts etc. made of cotton and linen.
6.0
Normally soiled blouses, shirts, overalls etc. made of
polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or
2.5
blends with cotton.
Type of wash/Notes
H
A
B
I
Detergents and additives Special options Start
Pre-
wash
3)
❉
3)
❉
C
Main
wash
Yes
Yes
K. Programme sequence indication
L N
J
}
K
}
´
´
´
´
L. “Door open” indication
M. “Buttons locked” indication
O
Your washing machine is equipped with
P
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:
M
N. “Water tap closed” indication
O. “Clean pump” indication
P. “Service” indication
2)
Softener Eco
Eco
Easy
ironing
Bez
zagnieceń
Pre-
wash
Wstępne
Intensive
rinse
Intensywne
płukanie
Rinse
hold
Stop
płukanie
delay
Opóźnienie
startu 2)
❉❉ ❉ ❉ ❉ ❉ ❉ ❉
❉❉ ❉ ❉ ❉ ❉ ❉ ❉
Variable
spin
Prędkość
wirowani
Spin
a
Max
Spin
Speed
rpm
max.
1000
1)
Daily load
Quick wash
Delicates
Wool
Handwash
(Lingerie)
Gentle Spin
Intensive Spin
Rinse & Spin
Drain
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Do not use liquid detergent when activating the “Start Delay”.
3)
Do not use liquid detergent for the main wash when activating the “Prewash” option.
Codzienne
Program szybki
(30 min)
Delikatne
Wełniane
Pranie ręczne
(Bielizna)
Delikatne
wirowanie
Wirowanie
Płukanie i
wirowanie
Wypompowanie
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
20 - 40 °C
——
——
——
———
Slightly to normally soiled textiles made of cotton and/or
3.0
synthetics.
Shortly worn outer clothing made of cotton, polyester,
3.0
polyamide and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and
1.5
blouses.
Only woollens, labelled with the Woolmark and identifi ed as
machine washable.
1.0
This programme (40°C) is tested and approved by The
Woolmark Company for machine washable wool.
Textiles made of silk, linen, wool and viscose marked as
“handwashable”.
Up to a temperature of 30°C, this cycle is particularly
suitable to treat delicate lingerie (use of a laundry net
1.0
strongly recommended).
This programme (40°C) is tested and approved by The
Woolmark Company for handwashable wool.
In this programme spinning is gentle. Same as the spin cycle in
1.0
the “Wool” programme.
In this programme spinning is intensive. Same as the spin cycle
7.0
in the “Cotton” programme.
Same as the last rinse and the final spin in the “Cotton”
7.0
programme.
Drain only - no spinning. Alternative method of terminating
programme after “Rinse Hold”. Press “Reset/Drain” and then
“Start/Pause” to start the “Drain” programme.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for
the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are
washed according to the instructions on the garment label and those issued in this programme chart.
Yes
—
Yes
—
3)
Yes
❉
Yes
—
Yes
—
—
❉
—— — —
❉
——
❉
—— — —
❉
—— — —
❉
❉
—
❉
❉❉❉❉
❉❉❉
—
❉❉❉
❉❉❉
❉❉❉
—— —— — — — —
—— —— — — — —
——
—— —
❉
❉❉❉❉
❉❉
❉❉
max.
max.
1000
1000
400
1000
max.
max.
1)
—— —— — — — — — — —
Whirlpool is a registered trademark of Whirlpool USA
M0702
5019 301 06095
1)
1)
1)
Black process 45.0° 100.0 LPI
30106095GB.fm Page 2 Thursday, September 20, 2007 6:02 PM
CONSUMPTION DATA
Programme
Temperatu r e
(°C)
Cotton 95 7.0 70
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
2.10 2:10
*
Cotton 60 7.0 65 1.33 2:20
Cotton with “Eco”
***
60 7.0 60 1.19 2:30
Cotton 40 6.0 62 0.75 2:05
Synthetics 60 2.5 50
0.80 1:35
**
Synthetics 40 2.5 46 0.40 1:20
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.30 0:30
Delicates 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Handwash (Lingerie) 30 1.0 45 0.40 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The time indicated on the display can deviate from the values in the table, because it takes into account the household
*
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
1. Push the
“On/Off”
button . The blue light
circle signals that the washer is switched on.
2. Select the
desired programme
by pushing the
corresponding programme button; it is marked
by a blue light.
3. The
temperature
and
spin speed
indicated on
the display can be altered by pressing the
“Temperature” button or the “Variable spin”
button.
SELECT ANY DESIRED OPTION
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Easy ironing” button
• Can be used together with “Cotton”,
“Synthetics” and “Daily load” programmes to
make ironing easier.
• Increases the water quantity and the clothes are
spun very gently.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the Prewash option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water or for washing baby linen, and
helps people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only .
• If you select “Rinse hold”, do not leave the laundry
to soak for too long.
The programme stops to “Rinse hold” at
Note:
the time the “Rinse hold” symbol on the display
lights up. The blue light under the
button flashes.
Pause”
“Start/
Terminate the “Rinse hold” option:
• Press the
“Start/Pause”
button ; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, push the
“Drain/Reset” button and then the
“Start/Pause”
button to start the Drain programme.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
SAVE YOUR FAV O URITE PR OGRAMMES
If there is a programme setting which you use
frequently, the appliance offers the possibility to
save one setting for each programme so that it can
be used again by just pushing one button.
• Select the desired programme, temperature, spin
speed and option(s), push and hold the
“Favourites”
lamp next to
button for at least 3 seconds. The
“Favourites”
shortly flashes and
then lights up - the programme setting is saved.
Next time you want to use your individual
programme setting, select the programme, push the
“Favourites”
Pause”
button and start by pushing
.
If you want to replace the saved programme
setting by another one:
• Push the programme button, select temperature,
spin speed and options as desired and then press
and hold the
“Favourites”
button for at least 3
seconds. The previously saved programme setting
will be replaced by the new one.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature, spin speed and
options.
• Press the “Start Delay” button to select the delay
time up to 23 hours.
• Press the
“Start/Pause”
button .
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.
•The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the
“Start/Pause”
, the number of hours preselected can be
reduced by pressing and holding the “Start
Delay” button. From 1 hour on, the delay time
can also be reduced by minutes.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Select another programme or press the
button.
Reset”
..after having pressed the “Start/Pause” button:
• Press the
“Drain/Reset”
button - the start
delay time disappears from the display.
PROGR AMME START
Open the tap and press the
The blue light under the
“Start/Pause”
“Start/Pause”
button .
button
is on. The programme sequence indicator shows
the current programme phase, running from top to
bottom through Wash, Rinse, Spin/Drain.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
symbol lights to show that the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
“Start/
button
“Drain/
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
LOCK BUTTONS
You can lock the buttons of the control panel against
improper use (e.g. by children).
• Press the temperature and the spin speed button
simultaneously and hold them for at least 3
seconds. The key symbol on the display lights up.
• To unlock the buttons again: proceed in the same way.
RED INDICATIONS ON THE DISPLAY
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
PROGRAMME END
• The symbols of the programme sequence
indicator are dark, and the “Door open”
symbol lights up.
1. Switch the machine off by pushing
“On/Off”
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause
the programme. The light flashes.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The
new programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Drain/Reset”
button cancels a programme
before the end.
• Press the
“Drain/Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06095
.
Black process 45.0° 100.0 LPI
Loading...