Whirlpool AWO/D 8210 INSTRUCTION FOR USE
30106429GB.fm Page 1 Friday, October 22, 2010 6:33 PM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
C
D
H
}
E
F
A
B
E. Programme selector
F. “Start (Pause)” button
G. “Variable spin” button
I
H. Programme sequence indicator
I. “Reset” button
J. “Start delay” button
J K
G
K. Time display
Programme
Cotton /
Antibacterial
40 - 60 - 95 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Eco Cotton
60 °C
40 - 60 - 95 °C
30 - 40 - 60 °C
30 - 40 °C
40 °C
30 °C
- 40 °C
40 °C
60 °C
Care
Labels
Max.
Load
- Respect the manufacturer’s recommendations on the care label
kg
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your
8.0
laundry. The bacteria removal efficiency has been tested following a similar methodology to
the NF EN 13697 standard of Nov. 2001.
Normally soiled blouses, shirts, overalls etc. made of polyester (
3.0
(Perlon, Nylon) or blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Slightly to normally soiled textiles made of cotton and/or synthetics.
4.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
4.0
Only woollens, labelled with the Woolmark and identified as machine washable.
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0
Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen, towels etc.
The extended programme duration enables economic energy and water consumption while
8.0
maintaining good washing results.
Type of wash/Notes
Diolen, Trevira), polyamide
Detergents and additives Special options
Pre-
Main
wash
❉
❉
❉
—
—
—
—
—
wash
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Ye s
Softener
❉❉ ❉ ❉ ❉ ❉ ❉ ❉
❉❉ ❉ ❉ ❉ ❉ ❉ ❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
Start
delay
Clean + Pre-
—
wash
❉
——
Easy
ironing
——
❉❉❉❉
—— — —
—— — —
—— — —
—— —
Intensive
rinse
Rinse
hold
Var ia ble
spin
❉❉
❉❉
❉❉
❉❉
❉❉❉
Max.
Spin
Speed
rpm
max.
max.
1000
max.
max.
1000
400
max.
1)
1)
1)
Rinse & Spin
Spin
Gentle Spin
Drain
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted in this programme.
Black process 45.0° 150.0 LPI
—
—
—
—
8.0
8.0
8.0
8.0
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain only - no spinning. Alternative method of terminating programm
e after “Rinse Hold”.
——
❉❉
———
———
———
—— —
—— — — —
❉
—— — — —
❉
—— — — — — —
❉
❉❉❉
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06429
max.
max.
❉
1000
1)
❉
30106429GB.fm Page 2 Friday, October 22, 2010 6:33 PM
CONSUMPTION DATA
Programme
Cotton / Antibacterial 95 8.0 82
Cotton
***
Cotton 40 8.0 77 0.75 2:05
Synthetics 60 3.0 46
Synthetics 40 3.0 42 0.40
Delicates 30 1.5 60 0.50 0:45
Daily load 40 4.0 48 0.50
Quick wash 30 4.0 48 0.25
Wool 40 1.0 60 0.55
Handwash 40 1.0 45 0.55
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect
to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can deviate from the values in
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference Programme for Energy Label.
Eco Cotton 60 8.0 59 1.04 4:00
Te m p e r a t u r e
(°C)
60 8.0 59 1.52 3:30
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for Use.
1. Turn the
2. The
3. The indication lamp of the predefined
programme selector
and temperature.
time display
programme (in hours and minutes), and the
indication lamp blinks.
shows the duration of the chosen
to the desired programme
“Start (Pause)”
spin speed
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.
“Clean +” button
• Choose this option if you use an in-wash additive for stain removal
(powder, for example “Vanish”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.
• Selectable for programmes “Cotton” and “Synthetics”. Choose
temperature of 30 or 40°C and use with maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain removers and bleaches on oxygen
basis.
Chlorine or perborate bleaches must not be used!
Load
Wat er
(kg)
the table, because it takes into account the household conditions applicable at that time.
lights up.
Energy
(l)
(kWh)
2.40 2:10
**
0.80 1:35
**
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when activating
the “Prewash” option.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and “Daily
load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
water, washing baby linen and helps people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and prevent
colours from changing.
• This option is particularly recommended for the programmes
“Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning to a
later time, or if you want to drain only.
• If you select “Rinse hold” do not leave the laundry items to
soak for too long.
The programme stops to “Rinse hold” at the time the “Rinse
Note:
hold” light in the programme sequence indication is on. The
indication lamp next to the
Terminate the “Rinse hold” option :
• Press the
“Start (Pause)”
terminate automatically with the final spin cycle for the present
wash programme.
Approx. Programme Duration
(hours : minutes)
“Start (Pause)”
button . The programme will
*
1:20
1:00
0:30
0:45
0:40
button blinks.
• If you do not wish to spin the clothes, turn the programme
selector to the “Drain” programme and press the
button .
(Pause)”
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled but
intermediate spin peaks remain during rinse. The water is
drained out only.
“Start
START DELAY
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time by 1 to
23 hours.
•Press the
• The time delay indication disappears when the programme
• Once having pressed the
To cancel the “Start delay”
...before you press the “Start (Pause)” button :
• Turn the programme selector to another position or press the
...after having pressed the “Start (Pause)” button :
•Press the
“Start (Pause)”
The countdown of the delay time begins. The “Start delay”
indication lamp and the dot on the display will keep blinking
until the programme starts.
starts and it is replaced by the remaining programme time.
number of hours preselected can be reduced by pressing again
the “Start delay” button.
button .
“Reset”
“Reset”
start delay time disappears from the time display.
button .
“Start (Pause)”
button for at least 3 seconds - the
button , the
PROGRAMME START
Open the tap and press the
indication lamp of the
programme sequence indicator shows the current programme
phase, running from left to right through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is the
case, an animation appears on the time display.
“Start (Pause)”
“Start (Pause)”
button . The
button lights up. The
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to
show that the door can be opened. As long as a wash programme
is running, the door remains locked and must on no account be
forced open. In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an
electrical component. Refer to the “Troubleshooting Guide” in your
Instructions for Use. If the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water
tap. If the indication still lights up, refer to the “Troubleshooting
Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is
kinked or the filter must be cleaned. In the latter case refer to the
Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator are off,
and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
2. Select the new programme (with temperature), any options
3. Press the
“Start (Pause)”
programme. The light blinks.
and another spin speed if you want.
“Start (Pause)”
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
button to pause the
button again. The new
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
•Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds. “rES”
“Reset”
appears on the display. Any existing water is drained out
before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06429
Black process 45.0° 150.0 LPI
Loading...