Whirlpool AWO/D 8011 INSTRUCTION FOR USE

30106178GB.fm Page 1 Tuesday, April 29, 2008 1:44 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

C D

}

A B

E. Programme selector F. “Start (Pause)” button G. “Variable spin” button H. Programme sequence indicator

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

Cotton /

Antibacterial

40 - 60 - 95 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

40 - 60 - 95 °C

Sintéticos

30 - 40 - 60 °C

Delicados

30 - 40 °C

40 °C

30 °C

Lana/lã

Frio - 40 °C

Care

Labels

Max

Load

- For temperature selection, respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of

7.0 your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.0

polyamide (Perlon, Nylon) or blends with cotton.

1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.

4.0 Slightly to normally soiled textiles made of cotton and/or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with

4.0

cotton.

1.0 Only woollens, labelled with the Woolmark and identified as machine washable.

Type of wash/Notes

Detergents and additives Special options

Pre-

Main

wash

❉

—

Softener

wash

Yes

Start

delay

Inicio

diferido

❉❉❉❉❉❉ ❉

❉❉❉

❉❉

I. “Reset” button J. “Start delay” button

Pre-

wash

Prelava.

—

——

and Start delay indicators

Cold wash

Lava.

frío

Rinse

hold

Paro cuba

llena/cheia

Variable

spin

Centrif.

❉❉ ❉

Max Spin

Speed

rpm

max.

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin

Spin Centrif.

Gentle Spin Centrif. Suave

Drain

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted to 400 rpm in these programmes.

Black process 45.0° 100.0 LPI

40 °C

Lingerie

30 °C

Aclarar/enx.

& Centrif.

Desagüe/

Drenag.

— —

— ——

1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”.

This cycle is particularly suitable to treat delicate lingerie (use of a laundry net

1.0

strongly recommended).

7.0

Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

7.0

programme.

1.0

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Water is drained only without any spinning.

Yes

—

Yes

— ——

❉❉

❉❉ ❉❉

—— — —— —

——

❉❉ ❉

——— ————

❉

————

❉

❉❉

❉ ❉

400

max.

max. max.

———————— — —

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06178

30106178GB.fm Page 2 Tuesday, April 29, 2008 1:44 PM

CONSUMPTION DATA

Programme

Cotton / Antibacterial 95 7.0 74

Cotton 40 6.0 62 0.75 2:05 Cotton

Synthetics 60 3.0 46 Synthetics 40 3.0 42 0.40 1:20

Delicates 30 1.5 60 0.50 0:45

Daily load 40 4.0 48 0.50 1:00

Quick wash 30 4.0 48 0.25 0:30

Wool 40 1.0 60 0.55 0:45

Handwash 40 1.0 45 0.55 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* **

Lingerie 30 1.0 45 0.45 0:40

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.

Temp e r a ture

(°C)

60 7.0 54 1.19 2:20

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Close the door and turn the programme selector to the desired programme and temperature. The indication lamp next to the

“Start (Pause)”

button flashes.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the prewash option.

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Selectable for pr ogrammes “Cotton” and “Synthetics”; choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for st ain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

Load

(kg)

Water

(l)

• P rolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain re movers an d bleaches on oxygen basis.

not be used!

“Cold wash” button

• Water is heated only up to 20°C.

• Suitable for delicate laundry items with wash temperature recommendation of max. 30°C on the care label.

• Selectable only on the lowest temperature step of each programme.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse Hold”, do not leave the laundry items to soak for too long.

Note:

time the “Rinse Hold” light in the programme sequence indication is on. The indication lamp next to the

(Pause)”

Terminate the “Rinse hold” option:

• P ress the will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the

Energy

(kWh)

2.10 2:10

0.80 1:35

The programme stops to “Rinse hold” at the

button flashes.

“Start (Pause)”

Approx. Programme Duration

(hours : minutes)

Chlorine or perborate bleaches must

button; the programme

“Start (Pause)”

button.

“Start

“Variable spin” button

• Every programme has a predefined spin speed.

• P ress the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1, 3, 6, 9 or 12 hours.

• Press the The indication next to the “Start Delay” button flashes and goes off when the programme starts.

• Once having pressed the countdown of the time delay begins. When the programme starts, the start delay indicator light goes off and is replaced by the programme sequence indication.

•After the the number of hours preselected can be reduced by pressing again the “Start Delay” button.

To cancel the “Start Delay” ..before you press the “Start (Pause)” button:

• Turn the programme selector to another position or press the

..after having pressed the “Start (Pause)” button:

• Press the start delay indicator light goes out.

“Start (Pause)”

“Reset”

button.

“Start (Pause)”

button has been pressed,

button.

button for at least 3 seconds - the

button, the

PROGR AMME START

Open the tap and press the indication lamp next to the up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phase is finished, the corresponding indication goes out.

“Start (Pause)”

button. The

button lights

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start (Pause)”

button to pause the

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

•Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. Any existing

“Reset”

water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06178

Black process 45.0° 100.0 LPI