Whirlpool AWO/D 8008 INSTRUCTION FOR USE
30106124aGB.fm Page 1 Wednesday, January 23, 2008 12:22 PM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
C
D
H
J
E
F
E. Programme selector
F. “Start/Pause” button
A
B
I
G
G. “Variable spin” button
H. Programme sequence indicator
and Start delay indicators
I. “Reset” button
J. “Start delay” button
Max
Programme
Cotton /
Antibacterial
40 - 60 - 95 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
Rinse & Spin
Spin Centrif.
Gentle Spin Centrif. Suave
Drain Desagüe/Drenag.
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted to 400 rpm in these programmes.
Algod.
40 - 60 - 95 °C
Sintéticos
30 - 40 - 60 °C
Delicados
30 - 40 °C
Diario
40 °C
Rápido
30 °C
Lana/lã
Frio - 40 °C
A mano/mão
40 °C
Lingerie
30 °C
Aclarar/enx.
& Centrif.
Care
Labels
—
—
—
——
Load
- For temperature selection, respect the manufacturer’s recommendations on the care
label
kg
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
7.0
Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of
your laundry. The bacteria removal efficiency has been tested following a similar
methodology to the NF EN 13697 standard of Nov. 2001.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
3.0
polyamide (Perlon, Nylon) or blends with cotton.
1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.
4.0 Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with
4.0
cotton.
1.0 Only woollens, labelled with the Woolmark and identified as machine washable.
1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”.
This cycle is particularly suitable to treat delicate lingerie (use of a laundry net
1.0
strongly recommended).
7.0
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
7.0
programme.
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Water is drained only without any spinning.
Type of wash/Notes
Detergents and additives Special options Max
Pre-
Main
wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Softener
❉ ❉❉❉❉ ❉ ❉
❉ ❉❉❉❉ ❉ ❉
❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
wash
❉
❉
❉
—
—
—
—
—
——
—— —
—— —
Start
diferido
delay
Inicio
❉
❉
Pre-
Eco
Eco
Cold
wash
Lava.
wash
Prelava.
—
——
——
——
——
——
———
Rinse
hold
Paro cuba
frío
llena/cheia
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉
——— —
——— —
Variable
spin
Centrif.
Spin
Speed
rpm
max.
max.
max.
max.
max.
max.
1)
400
1)
400
max.
max.
❉
max.
❉
———————— — —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06124/A
Black process 45.0° 100.0 LPI
30106124aGB.fm Page 2 Wednesday, January 23, 2008 12:22 PM
CONSUMPTION DATA
Programme
Temp e r at ur e
(°C)
Cotton / Antibacterial 95 7.0 74
Load
(kg)
Water
(l)
*
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
2.10 2:10
Cotton 60 7.0 69 1.33 2:10
Cotton with “Eco”
**
Synthetics 60 3.0 46
60 7.0 54 1.19 2:20
0.80 1:35
*
Synthetics 40 3.0 42 0.40 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 40 4.0 48 0.50 1:00
Quick wash 30 4.0 48 0.25 0:30
Wool 40 1.0 60 0.55 0:45
Handwash 40 1.0 45 0.55 0:40
Lingerie 30 1.0 45 0.45 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*
Reference Programme for Energy Label.
**
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
Close the door and turn the programme selector to the
desired programme and temperature. The indication
lamp next to the
“Start/Pause”
button flashes.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch
off automatically. Unsuitable combinations of
options are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the prewash option.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Cold wash” button
• Water is heated only up to 20°C.
• Suitable for delicate laundry items with wash
temperature recommendation of max. 30°C on
the care label.
• Selectable only on the lowest temperature step
of each programme.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only .
• If you select “Rinse Hold”, do not leave the
laundry items to soak for too long.
The programme stops to “Rinse hold” at
Note:
the time the “Rinse Hold” light in the programme
sequence indication is on. The indication lamp
next to the
“Start/Pause”
button flashes.
Terminate the “Rinse hold” option:
• Press the
“Start/Pause”
button; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the
“Start/Pause”
button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent
when activating the “Start Delay”.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the
“Start/Pause”
button.
The indication next to the “Start Delay” button
flashes and goes off when the programme starts.
• Once having pressed the
“Start/Pause”
button,
the countdown of the time delay begins. When
the programme starts, the start delay indicator
light goes off and is replaced by the programme
sequence indication.
• After the
“Start/Pause”
button has been pressed,
the number of hours preselected can be reduced
by pressing again the “Start Delay” button.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another
position or press the
“Reset”
button.
..after having pressed the “Start/Pause” button:
• Press the
“Reset”
button for at least 3 seconds -
the start delay indicator light goes out.
PROGR AMME START
Open the tap and press the
indication lamp next to the
“Start/Pause”
“Start/Pause”
button. The
button
lights up. The programme sequence indicator shows
the current programme phase, running from left to
right through Wash, Rinse, Spin/Drain.
When the programme phase is finished, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show that the door can be opened. As
long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The new
programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Reset”
button cancels a programme before
the end.
• Press the
“Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06124/A
Black process 45.0° 100.0 LPI
Loading...