Whirlpool AWO/D 7830 INSTRUCTION FOR USE

30105969GB.fm Page 1 Thursday, October 19, 2006 3:26 PM

GB AWO/D 7830 PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

C D

JBK G

E. Programme selector F. “Start/Pause” button G. “Variable spin” button

H. Programme sequence indicator

I. “Reset” button J. “Start delay” button

K. “Temperature” button L. Display

Programme Temperature

White Cotton

Cotton

Synthetics

Daily load

Quick wash

Delicates

Wool

Handwash

70 - 95 °C

50 - 60 °C 20 - 40 °C

20 - 60 °C

20 - 30 °C

20 - 40 °C

Care

Labels

Max

Load

- For temperature selection, respect the manufacturer’s

recommendations on the care label

6.0

Normally to heavily soiled bed linen, table linen and underwear,

6.0

towels, shirts etc. made of cotton and linen.

5.0

Normally soiled blouses, shirts, overalls etc. made of polyester

2.5

(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics.

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide

3.0

and blends with cotton. Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Only woollens, labelled with the woolmark and identified as

1.0

machine washable. Textiles made of silk, linen, wool and viscose marked as

1.0

“handwashable”.

Type of wash/Notes

Detergents and additives Special options

Pre-

Main

wash

❉

—

❉

— —

Softener Eco Pre-

Wash

Yes

❉❉❉❉ ❉ ❉❉❉

❉

❉ ❉

——

—— —

—— ——

Start

wash

delay

❉❉ ❉❉❉

❉

❉❉

❉ ❉

Easy

ironing

Intensive

—— ——

rinse

Rinse

Variable

hold

spin

❉❉ ❉❉

Max Spin

Speed

rpm

max.

1000

1 pos. below

max.

1000

400

Rinse & Spin

Spin

Gentle Spin

Drain

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Black process 45.0° 100.0 LPI

—— —— —— ——

Same as the last rinse and the final spin in the “Cotton” programme.

6.0

In this programme spinning is intensive. Same as the spin cycle in the

6.0

“Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the

1.0

“Wool” programme. Drain only - no spinning. Alternative method of terminating programme

—

after “Rinse Hold”.

—— —— — —— —— — ——

❉

——

❉ ❉ ❉

—

❉❉❉

——— ———

❉ ❉

—— — ——— — — ——

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05969

max.

1000

—

30105969GB.fm Page 2 Thursday, October 19, 2006 3:26 PM

CONSUMPTION DATA

Temperature

Programme

(°C)

White Cotton 95 6.0 59

Load

(kg)

Water

(l)

Energy

Approx. Programme

Duration

(kWh)

(hours : minutes)

1.90 2:00

Cotton 60 6.0 56 1.14 2:10

Cotton with “Eco”

***

60 6.0 51 1.02 2:30

Cotton 40 5.0 53 0.65 2:00

Synthetics 60 2.5 50

0.80 1:35 Synthetics 40 2.5 46 0.40 1:20 Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.30 0:30

Delicates 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household

conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

programme selector

to the desired programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The

“Start/Pause”

button flashes.

2. The

temperature

can be altered by pressing

the “Temperature” button.

3. The indication lamp of the predefined

spin speed

lights up; in case you want to set another spin speed, press the “Variable spin” button .

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only .

• If you select “Rinse hold”, do not leave the laundry to soak for too long.

The programme stops to “Rinse hold” at

Note:

the time the “Anticrease” light in the programme sequence indicator is on. The indication lamp next to the

“Start/Pause”

button flashes.

Terminate the “Rinse hold” option :

• Press the

“Start/Pause”

button ; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” p rogramme and press the

“Start/Pause”

button .

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours;

• Press the

“Start/Pause”

button . The indication light next to the “Start Delay” button lights up and the countdown of the delay time begins. The dot between hours and minutes of the delay time indicated flashes.

•The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the

“Start/Pause”

button

, the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced in steps of 10 minutes.

To cancel the “Start Delay” ..before you press the “Start/Pause” button :

• Turn the pro gramme selector to another position or press the

“Reset”

button .

..after having pressed the “Start/Pause” button :

• Press the “Reset” button for at least 3 seconds - the start delay time disappears from the display.

PROGR AMME START

Open the tap and press the

“Start/Pause”

The indication lamp next to the

“Start/Pause”

button .

button

lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,

appears on the display

an animation

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

“Start/Pause”

button to pause

the programme. The light flashes.

2. Select the new programme, temperature, any options and another spin speed if you want.

3. Press the

“Start/Pause”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Reset”

button cancels a programme

before the end.

• Press the

“Reset”

button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05969

Black process 45.0° 100.0 LPI