Whirlpool AWO/D 7300/1 W, AWO/D 7500/1 W INSTRUCTION FOR USE

30106175GB.fm Page 1 Tuesday, April 22, 2008 10:03 AM

GB PROGRAMME CHART

A.“On/Off” button

B.Programme selection buttons

C.Option buttons

D.“Favourite” button

E.“Temperature” button

F.“Start delay” button

G.“Variable spin” button

H.“Start/Pause” button

I.“Drain/Reset” button

J.Display

H	B J L K
	}

			C	}
					M
D	A	I			E F

K. Programme sequence indication

N	L. “Door open” indication
O M. “Buttons locked” indication
P	Your washing machine is equipped with
	automatic safety functions which detect
	and diagnose faults at an early stage
	and react appropriately, e.g.:
G	N. “Water tap closed” indication
	O. “Clean pump” indication
	P. “Service” indication

														Max	Type of wash/Notes	Detergents and additives							Special options				Start	Spin
Programme		Tempe-			Care									Load		Pre-	Main	Softener			Eco	Easy		Pre-	Intensive	Rinse	delay 2)	Variable	Max
																wash	wash					ironing		wash	rinse	hold		spin	Spin
		rature		Labels											- For temperature selection, respect the manufacturer’s
																													Speed
														kg	recommendations on the care label
																													rpm
Cotton /		70 - 95 °C												7.0	Normally to heavily soiled bed linen, table linen and underwear, towels, shirts
Antibacterial
															etc. made of cotton and linen.	3)	Yes												max.
		50 - 60 °C												7.0	At a temperature of 80°C or more, this programme eliminates bacteria, ensuring
Cotton															sanitization of your laundry. The bacteria removal efficiency has been tested
		20 - 40 °C												6.0	following a similar methodology to the NF EN 13697 standard of Nov. 2001.
Synthetics		20 - 60 °C												2.5	Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),	3)	Yes												1000 1)
															polyamide (Perlon, Nylon) or blends with cotton.
Daily load		20 - 60 °C												3.0	Slightly to normally soiled textiles made of cotton and/or synthetics.	—	Yes				—			—					max.
Quick wash		20 - 30 °C												3.0	Shortly worn outer clothing made of cotton, polyester, polyamide and blends	—	Yes				—	—		—	—				max.
															with cotton.
Delicates		20 - 40 °C												1.5	Curtains and delicate clothing, dresses skirts, shirts and blouses.	3)	Yes				—	—			—				1000 1)
Wool		20 - 40 °C												1.0	Only woollens, labelled with the Woolmark and identified as machine washable.	—	Yes				—	—		—	—				1000 1)
															This programme (40°C) is tested and approved by The Woolmark Company for
															machine washable wool.
															Textiles made of silk, linen, wool and viscose marked as “handwashable”.
Handwash		20 - 40 °C												1.0	Up to a temperature of 30°C, this cycle is particularly suitable to treat delicate	—	Yes				—	—		—	—				400 1)
(Lingerie)															lingerie (use of a laundry net strongly recommended).
															This programme (40°C) is tested and approved by The Woolmark Company for
															handwashable wool.
															Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
															made of cotton and/or linen.
SuperEco		20 - 60 °C												7.0	Offers highest economy in energy consumption by prolonged wash duration. Ideal to	—	Yes				—	—		—					max.
															be run overnight to additionally profit from the more favourable energy rates. To avoid
															noise of spinning at night, set spin speed to “0” and start spin programme in the
															morning, or define programme start with “Start Delay” accordingly.
Intensive Spin		—			—									7.0	In this programme spinning is intensive. Same as the spin cycle in the “Cotton”	—	—	—			—	—		—	—	—			max.
															programme.
Rinse & Spin		—			—									7.0	Same as the last rinse and the final spin in the “Cotton” programme.	—	—				—	—		—					max.
Drain		—			—									—	Drain only - no spinning. Alternative method of terminating programme after “Rinse	—	—	—			—	—		—	—	—	—	—	—
															Hold”. Press “Reset/Drain” and then “Start/Pause” to start the “Drain” programme.

:

1)

2)

3)

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes. Do not use liquid detergent when activating the “Start Delay”.

Do not use liquid detergent for the main wash when activating the “Prewash” option.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for	Whirlpool is a registered trademark of Whirlpool USA
the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are
washed according to the instructions on the garment label and those issued in this programme chart. M0702	5019 301 06175

Black process 45.0° 100.0 LPI

30106175GB.fm Page 2 Tuesday, April 22, 2008 10:03 AM

CONSUMPTION DATA

	Programme	Temperature	Load	Water	Energy	Approx. Programme Duration
		(°C)	(kg)	(l)	(kWh)	(hours : minutes)*
	Cotton / Antibacterial	95	7.0	70**	2.10	2:10
	Cotton	60	7.0	65	1.33	2:20
	Cotton with “Eco”***	60	7.0	60	1.19	2:30
	Cotton	40	6.0	62	0.75	2:05
	Synthetics	60	2.5	50**	0.80	1:35
	Synthetics	40	2.5	46	0.40	1:20
	Daily load	40	3.0	41	0.50	1:00
	Quick wash	30	3.0	41	0.30	0:30
	Delicates	30	1.5	60	0.50	0:45
	Wool	40	1.0	60	0.50	0:45
	Handwash	40	1.0	45	0.50	0:40
	Handwash (Lingerie)	30	1.0	45	0.40	0:40
	SuperEco	60	7.0	62	0.84	4:00

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***Reference Programme for Energy Label.

						“Intensive rinse” button
	ADD DETERGENTS, CLOSE THE DOOR
						• More water is added and rinse cycle is prolonged.
	AND SELECT THE PROGRAMME
						• This option is particularly suitable for areas with very
	Add detergent as indicated on the front page and as
						soft water or for washing baby linen, and helps people
	described in the chapter “Detergent and Additives” in
						with allergies.
	your Instructions for Use.
	1.	Push the “On/Off” button		. The blue light circle		“Rinse hold” button
		signals that the washer is switched on.				• The laundry remains in the last rinse water without
	2. Select the desired programme by pushing the					progressing to the final spin cycle to avoid creasing and
		corresponding programme button; it is marked by a				prevent colours from changing.
		blue light.
						• This option is particularly recommended for the
	3.	The temperature and spin speed indicated on the
						programmes “Synthetics”, “Daily load” and “Delicates”.
		display can be altered by pressing the “Temperature”
						• It is particularly useful if you want to postpone spinning
		button	or the “Variable spin” button		.
						to a later time, or if you want to drain only.
	SELECT ANY DESIRED OPTION					• If you select “Rinse hold”, do not leave the laundry to
	When the combination of programme and additional					soak for too long.
	option(s) is not possible, the indication lights switch off					Note: The programme stops to “Rinse hold” at the
	automatically. Unsuitable combinations of options are					time the “Rinse hold” symbol		on the display lights
	deselected automatically.					up. The blue light under the “Start/Pause” button
	“Eco” button					flashes.
	• With a modified temperature profile and a slightly
						Terminate the “Rinse hold” option			:
		prolonged washing duration, the optimum
						• Press the “Start/Pause” button			; the programme
		combination of excellent washing result and even
						will terminate automatically with the final spin cycle for
		lower energy consumption is achieved.
						the present wash programme.
	“Easy ironing” button
	• Can be used together with “Cotton”, “Synthetics” and					• If you do not wish to spin the clothes, push the “Drain/
		“Daily load” programmes to make ironing easier.				Reset” button and then the “Start/Pause”
	• Increases the water quantity and the clothes are spun					button	to start the Drain programme.
		very gently.				“Variable spin” button
	“Prewash” button					• Every programme has a predefined spin speed.
	• Only for heavily soiled loads (for example sand,
						• Press the button to set another spin speed.
		granular dirt) sensible. Increases the cycle time by
						• If spin speed “0” is selected, the final spinning is
		approximately 15 min.
						cancelled but intermediate spin peaks remain during
	• Do not use liquid detergent for the main wash when
						rinse. The water is drained out only.
		activating the Prewash option.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

•Select the desired programme, temperature, spin

speed and option(s), push and hold the “Favourites” button for at least 3 seconds. The lamp next to

“Favourites” shortly flashes and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the “Favourites” button and start by pushing “Start/Pause” .

If you want to replace the saved programme setting by another one:

•Push the programme button, select temperature, spin

speed and options as desired and then press and hold

the “Favourites” button for at least 3 seconds. The previously saved programme setting will be replaced by the new one.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

•Select programme, temperature, spin speed and options.

•Press the “Start Delay” button to select the delay time up to 23 hours.

•Press the “Start/Pause” button .

The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes flash.

•The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

•Once having pressed the “Start/Pause” button , the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1

hour on, the delay time can also be reduced by minutes.

To cancel the “Start Delay”

..before you press the “Start/Pause” button:

•Select another programme or press the “Drain/ Reset” button .

..after having pressed the “Start/Pause” button:

•Press the “Drain/Reset” button - the start delay time disappears from the display.

PROGRAMME START

Open the tap and press the “Start/Pause” button . The blue light under the “Start/Pause” button is on. The programme sequence indicator shows the current programme phase, running from top to bottom through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a

wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

LOCK BUTTONS

You can lock the buttons of the control panel against improper use (e.g. by children).

•Press the temperature and the spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up.

•To unlock the buttons again: proceed in the same way.

RED INDICATIONS ON THE DISPLAY

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

PROGRAMME END

•The symbols of the programme sequence indicator are dark, and the “Door open” symbol lights up.

1.Switch the machine off by pushing “On/Off” .

2.Close the water tap.

3.Open the door and unload the machine.

4.Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to pause the programme. The light flashes.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

The “Drain/Reset” button cancels a programme before the end.

•Press the “Drain/Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06175

Black process 45.0° 100.0 LPI