Whirlpool AWO/D 7450 INSTRUCTION FOR USE

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

Max. Load

Programme

Care

Labels

Cotton

Antibacterial

95 °C

Cotton

40 - 60 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin

Spin Essorage

Drain Vidange

i : option / Yes : dosing required

1) For improved garment care spin speed is restricted in these programmes.

Coton

95 °C

Coton

40 - 60 °C

60 °C

Synthétique

30 - 40 - 60 °C

Délicat

30 - 40 °C

40 °C

Chrono

30 °C

Laine

Froid - 40 °C

Lavage main

40 °C

Lingerie

30 °C

Rinçage &

Essorage

–

– –

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or

7.0

stains, you can add an oxygenbased bleach additive which can be used at 95°C. This

programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.

7.0 made of cotton and linen.

Heavily soiled and robust laundry made of cotton, synthetics and their blends.

Economical energy consumption by prolonged wash duration - ideal to be run overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting

7.0

the spin speed to “0” and start spin programme in the morning, or by defining programme start with “Start delay” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose

3.0 etc.) or their blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and

4.0

their blends. Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

4.0

Brief programme to refresh your laundry.

Only woollens with a felt-free finish, labelled with the woolmark and identified as

1.0 machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

Care programme with a very gentle spin.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

Care programme with a very gentle spin.

7.0 Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

7.0

programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

Type of wash / Notes

- respect the manufacturer's recommendations on the care label

E G

Detergents and Additives Special options Max

Pre-

wash

Wash

– Yes

– –

– – – – –

Main

Yes

Pre-

Rapid

Rapide

–

Start delay

Départ

différé

i i

Softener

wash

Pré-

lavage

i i

i i i i i i i i i i

– –

i i i i

i i

– –

E. Programme selector

F. “Start (Pause)” button

G. Spin speed selector

H. Programme sequence indicator

I. “Reset” button

J. “Start delay” button

K. Time display

Clean+ Cold

–

– –

– – – – –

wash

Lavage

froid

–

i i

Intensiv

Rinçage

intensif

Easy

ironing

Anti-

Rinse

hold

Arrêt cuve

pleine

rinse

froissage

i i i i

–

i i

i i i i i

– –

i i

i i i i i

– –

i i

–

i i

Variable

spin

Essorage

variable

– – – – – – –

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01288

Spin

Speed

rpm

Max.

1000

Max.

1000

400

Max.

CONSUMPTION DATA

Programme

Cotton/Antibacterial 95 7.0 74* 2.10 2:10 -

Cotton ** 60 7.0 54 1.05 4:00 2:30 Cotton ** 60 3.5 40 0.85 3:00 ***

Cotton 40 7.0 69 0.80 3:15 2:15 Cotton ** 40 3.5 40 0.65 3:00 *** Super Eco 60 7.0 69 0.84 4:00 Synthetics 60 3.0 50* 0.80 1:35 1:14 Synthetics 40 3.0 46 0.50 1:20 0:59

Delicates 30 1.5 60 0.50 0:45 -

Daily load 40 4.0 45 0.50 1:00 -

Quick wash 30 4.0 45 0.40 0:30 -

Wool 40 1.0 60 0.50 0:45 -

Handwash 40 1.0 45 0.50 0:40 -

Lingerie 30 1.0 45 0.40 0:36 -

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). *

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ** Reference programmes for Energy Label. *** Automatic adaptation of programme duration after detection of wash load

Temperature

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the programme selector to the desired programme and temperature.

2. The time display shows the duration of the chosen programme (in hours and minutes), and the “Start (Pause)” indication lamp is flashing.

3. The indication lamp of the predefined spin speed lights up.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lamp lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Rapid” button

• Enables quicker washing by shortening the

programme duration.

• Recommendable for small loads or only lightly soiled

laundry.

Load

(kg)

Water

(l)

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Use with the maximum load.

• Add an appropriate amount of in-wash additive for

stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• May prolongs the programme by up to 15 minutes

• Appropriate for use of stain removers and bleaches

on oxygen basis. Chlorine or perborate bleaches must not be used! “Cold wash” button

• Water is heated only up to 20°C.

• Suitable for delicate laundry items with wash

temperature recommendation of max. 30° on the care label.

• Mainly selectable on the lowest temperature step of the programmes only. “Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with allergies.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

Energy

(kWh)

without “Rapid”

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

“Rinse hold” button

• The laundry remains in the last rinse water without pregressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave items to soak for too long.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme

and press the “Start(Pause)” button. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” lights in the preogramme sequence indication is on. The indication lamp next to the “Start(Pause)” button flashes.

Terminate the “Rinse hold” option:

• Press the “Start(Pause)” button; the programme

will terminate automatically with the final spin cycle for the present wash programme.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay

time by 1 to 23 hours.

• Press the “Start(Pause)” button.

The countdown of the delay time begins; the “Start delay” indication lamp and the dot on the display will keep blinking until the programme starts.

• The time delay indication disappears when the

programme starts and it is replaced by the remaining programme time.

• Once having pressed the “Start(Pause)” button,

the number of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay” ..before you press the “Start(Pause)” button:

• Turn the programme selector to another position or

press the “Reset” button.

..after having pressed the “Start(Pause)” button:

• Press the “Reset” button for at least 3 seconds - the

start delay time disappears from the time display.

PROGRAMME START

Open the tap and press the “Start(Pause)” button. The indication lamp next to the “Start(Pause)” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start(Pause)” button to pause the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “Start(Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press the “Reset” button for at least 3 seconds; “0:00” appears on the display. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01288