Whirlpool AWO/D 7127 INSTRUCTION FOR USE
30106139GB.fm Page 1 Tuesday, January 8, 2008 11:01 AM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
C
D
H
}
A
B
E. Programme selector
F. “Start/Pause” button
G. Spin speed selector
H. Programme sequence indicator
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Max
Programme
Cotton
40 - 60 - 95 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
Rinse & Spin
Spin Centrifuga
Short Spin Centrifuga breve
Drain Scarico acqua
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
Cotone
40 - 60 - 95 °C
Sintetici
30 - 40 - 60 °C
Delicati
30 - 40 °C
40 °C
30 °C
Lana
A freddo - 40 °C
Lavaggio a mano
40 °C
Lingerie
30 °C
Risciacquo &
Centrifuga
Care
Labels
Load
- For temperature selection, respect the manufacturer’s recommendations on
the care label
kg
Normally to heavily soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria,
7.0
ensuring sanitization of your laundry. The bacteria removal efficiency has
been tested following a similar methodology to the NF EN 13697 standard
of Nov. 2001.
—
—
—
——
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
3.0
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.
4.0 Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide and
4.0
blends with cotton.
Only woollens, labelled with the Woolmark and identified as machine
1.0
washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0
If you select “Rinse Hold” do not leave items to soak for too long. A very
gentle spin is used in this programme.
This programme is particularly suitable to treat delicate lingerie (use of a
1.0
laundry net strongly recommended).
7.0
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
7.0
programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
1.0
programme.
Drain only - no spinning. Alternative method of terminating programme after
“Rinse Hold”.
Type of wash/Notes
I. “Reset” button
E
I
F
JK
Detergents and additives Special options
Pre-
Main
wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Softener
❉❉❉❉❉❉❉❉
❉❉❉❉❉❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
wash
❉
❉
❉
—
—
—
—
—
——
———
———
G
Start
delay
Avvio
ritardato
❉
❉
J. “Start delay” button
K. Time display
Eco
Pre-
Easy
wash
Eco
Pre-
lavaggio
—
❉
——
Intensive
ironing
Stiro
Risciacquo
facile
intensivo
——
❉❉❉❉
—— — —
—— — —
—— — —
—— — —
—— —
Rinse
rinse
hold
Anti
piega
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉❉
—— — — —
—— — — —
Variable
spin
Centrifuga
variabile
❉
❉
Max
Spin
Speed
rpm
max.
1000
1000
max.
max.
1000
400
400
max.
max.
1000
1)
1)
1)
2)
2)
1)
——————— —— — —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06139
Black process 45.0° 100.0 LPI
30106139GB.fm Page 2 Tuesday, January 8, 2008 11:01 AM
CONSUMPTION DATA
Programme
Temperature
(°C)
Cotton 95 7.0 74
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
2.10 2:10
*
Cotton 60 7.0 69 1.33 2:10
Cotton with “Eco”
***
60 7.0 54 1.19 2:20
Cotton 40 7.0 69 0.75 2:05
Synthetics 60 3.0 46
0.80 1:35
**
Synthetics 40 3.0 42 0.40 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 40 4.0 48 0.50 1:00
Quick wash 30 4.0 48 0.25 0:30
Wool 40 1.0 60 0.55 0:45
Handwash 40 1.0 45 0.55 0:40
Lingerie 30 1.0 45 0.45 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
*
applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in your Instructions for Use.
1. Turn the
programme selector
to the desired
programme and temperature.
2. The
time display
shows the duration of the
chosen programme (in hours and minutes), and
the “Start/Pause” indication lamp is flashing.
3. The
indication lamp
of the predefined spin
speed lights up.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption can be achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
“Easy ironing” button
• Can be used together with “Cotton ”, “Synthetics”
and “Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are
spun very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only .
The programme stops to “Rinse hold” at
Note:
the time the “Rinse hold” light in the programme
sequence indication is on. The indication lamp
next to the
“Start/Pause”
button flashes.
Terminate the “Rinse hold” option:
• Press the
“Start/Pause”
button; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
•If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the
“Start/Pause”
button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the
delay time by 1 to 23 hours;
• Press the
“Start/Pause”
button.
The indication light next to the “Start Delay” button
lights up and the countdown of the delay time begins.
•The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the
“Start/Pause”
button,
the number of hours preselected can be reduced
by pressing again the “Start Delay” button.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another
position or press the
“Reset”
button.
..after having pressed the “Start/Pause” button:
• Press the
“Reset”
button for at least 3 seconds - the
start delay time disappears from the time display .
PROGR AMME START
Open the tap and press the
“Start/Pause”
The indication lamp next to the
“Start/Pause”
button.
button lights up. The programme sequence indicator
shows the current programme phase, running from
left to right through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme
time. Due to variations in load and temperature of
inlet water, the remaining time is newly calculated in
certain programme phases. If this is the case, an
animation appears on the time display.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show that the door can be opened. As
long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use;
if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Reset”
button cancels a programme before
the end.
• Press the
“Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06139
Black process 45.0° 100.0 LPI
Loading...