Whirlpool AWO/D 711 INSTRUCTION FOR USE

GB AWO/D 711

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B.“Service” indication

C.“Water tap closed” indication

D.“Clean pump” indication

PROGRAMME CHART

C A D B

G

H

EF

E.Programme selector

F.“Start/Pause” button

G.Programme sequence indicator

H.“Reset” button

				Type of wash / Notes	Max.	Detergents and Additives			Special options		Spin
			Care		Load	Pre-	Main	Softener	Cold	Spin speed	Speed
	Programme					wash	Wash		wash	reduction
			Labels
									Lavado	Centrif.
				- for temperature selection, respect the manufacturer's recommendations on the care label	kg				en frío	500 rpm	rpm
	Cotton	Algodón		Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen,			Yes 1)
	with prewash				5.0	Yes		i	–	i	1000
				underwear, shirts etc.).
	95 °C	95 °C
	Cotton	Algodón		Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.	5.0	–	Yes	i	i 2)	i	1000
	40 - 60 - 95 °C	40 - 60 - 95 °C
	Synthetics	Sintéticos		Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or			Yes 1)
	with prewash				2.5	Yes		i	–	i	1000
				blends with cotton.
	60 °C	60 °C
	Synthetics	Sintéticos		Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon)	2.5	–	Yes	i	i 2)	i	1000
				or blends with cotton.
	30 - 40 - 60 °C	30 - 40 - 60 °C
	Delicates	Delicados		Curtains and delicate clothing, dresses, skirts, shirts and blouses.	1.5	–	Yes	i	i	i	1000
	30 °C	30 °C
	Quick wash	Rápido		Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.	3.0	–	Yes	i	i	i	1000
	30 °C	30 °C
	Wool	Lana		Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.	1.0	–	Yes	i	i	i	1000
	Cold - 40 °C	Frío - 40 °C
	Handwash	A mano		Textiles made of linen, silk, wool and viscose marked as “handwashable”.	1.0	–	Yes	i	i	–	400 3)
	40 °C	40 °C
	Lingerie	Lingerie		This cycle is particularly suitable to treat delicate lingerie (use of laundry net strongly recommended).	1.0	–	Yes	i	i	–	400 3)
	30 °C	30 °C
	Rinse & Spin	Aclarar y Centrifugado	–	Same as the last rinse and the final spin in the “Cotton” programme.	5.0	–	–	i	–	i	1000
	Spin	Centrif. Intensivo	–	In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.	5.0	–	–	–	–	i	1000
	Gentle Spin	Centrif. Suave	–	In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.	1.0	–	–	–	–	i	1000
	Drain	Desagüe	–	Water is drained only without any spinning.	–	–	–	–	–	–	–
i :	option / Yes : dosing required
1)	Do not use liquid detergent.							Whirlpool is a registered trademark of Whirlpool USA.
2)	Cold wash option is selectable only for the lowest temperature step of the programme.								5019 301 10352
3)

For improved garment care spin speed is restricted to 400 rpm in this programme.

CONSUMPTION DATA

	Temperature	Load	Water	Energy	Approx. Programme
Programme					Duration
	(°C)	(kg)	(l)	(kWh)	(hours : minutes)
Cotton	95	5.0	49*	1.90	2:00
Cotton**	60	5.0	44	0.85	2:20
Cotton	40	5.0	44	0.60	2:00
Synthetics	60	2.5	50*	0.70	1:30
Synthetics	40	2.5	45	0.55	1:15
Delicates	30	1.5	50	0.50	0:45
Quick wash	30	3.0	40	0.40	0:30
Wool	40	1.0	55	0.60	0:45
Handwash	40	1.0	45	0.60	0:40
Lingerie	30	1.0	45	0.50	0:40

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergents as indicated on the front page and as described in your Instructions for Use. Close the door and turn the programme selector to the desired programme and temperature. The indication lamp next to the “Start/Pause” button flashes.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Cold wash” button

•With this option, water is heated only up to 20ºC.

•Suitable for delicate laundry items with wash temperature recomendation of max. 30ºC on the care label.

•Selectable only on the lowest temperature step of each programme.

“Spin speed reduction 500” button

•Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

•When the programme phrase is finised, the corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long

as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a

running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

•All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1.Turn the programme selector to the “Off/O” position.

2.Close the water tap.

3.Open the door and unload the machine.

4.Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to pause the programme. The light flashes.

2.Select the new programme (with temperature), any options and another spin speed if you want.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

•Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 10352