Whirlpool AWO/D 6928 User Manual

30106367GB.fm Page 1 Friday, March 26, 2010 2:28 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

C D

}

E. Programme selector F. “Start (Pause)” button

A B

J K

G. “Variable spin” button H. Programme sequence indicator I. “Reset” button J. “Start delay” button K. Time display

Max

Programme

Cotton

40 - 60 - 95 °C

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Eco Cotton

60 °C

Rinse & Spin

Spin

Drain

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted in this programme.

Care

Labels

— — —

Load

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made

7.0

of cotton and linen.

Normally to heavily soiled and robust bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers high economy in energy consumption by prolonged washing duration. Ideal to be run

7.0

overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.0

polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Slightly to normally soiled textiles made of cotton and/or synthetics.

4.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

4.0

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for

1.0

machine washable wool. Textiles made of linen, silk, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark Company for

1.0

handwashable wool. Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen, towels etc.

The extended programme duration enables economic energy and water consumption while

7.0

maintaining good washing results. Same as the last rinse and the final spin in the “Cotton” programme.

7.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

7.0

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

7.0

Type of wash/Notes

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “handwash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0620

Detergents and additives Special options

Pre-

Main

Softener

wash

Ye s

❉

Ye s

—

Ye s

❉

Ye s

❉

Ye s

—

Ye s

—

Ye s

—

Ye s

—

Ye s

—

—— ——— ———

Start

delay

❉❉ ❉ ❉ ❉ ❉ ❉ ❉

❉❉

———

❉❉ ❉ ❉ ❉ ❉ ❉ ❉

❉❉

—

——

——— —

———

——— ——— ——

❉

——— ————

❉

Pre-

wash

❉

Easy

ironing

Intensive

rinse

Rinse

hold

Var iable

Spin

❉❉❉

——

❉❉

❉❉❉❉

❉❉

❉❉❉

❉

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06367

Max Spin

Speed

rpm

max.

1000

max.

1000

400

max.

max. max.

Black process 45.0° 150.0 LPI

30106367GB.fm Page 2 Friday, March 26, 2010 2:28 PM

CONSUMPTION DATA

Programme

Cotton 95 7.0 74 Cotton 60 7.0 54 1.19 2:20 Cotton 40 7.0 69 0.75 2:05

Synthetics 60 3.0 46 Synthetics 40 3.0 42 0.40 1:20

Delicates 30 1.5 60 0.50 0:45

Daily load 40 4.0 48 0.50 1:00

Wool 40 1.0 60 0.55 0:45

Handwash 40 1.0 45 0.55 0:40

Eco Cotton

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time.

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***

Reference Programme for Energy Label.

***

Te m p e r a t u r e

(°C)

60 7.0 69 0.84 4:00

30 4.0 48 0.25 0:30

60 7.0 54 0.91 4:00

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the programme and temperature.

2. The programme (in hours and minutes), and the

(Pause)”

3. The indication lamp of the predefined

programme selector

time display

shows the duration of the chosen

indication lamp blinks.

to the desired

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Clean+” button

• Choose this option if you use an in-wash additive for

stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Selectable for programmes “Cotton” and “Synthetics”; choose

temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain

removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

Load

(kg)

“Start

lights up.

Wat er

Energy

(l)

(kWh)

2.10 2:10

0.80 1:35

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis.

not be used!

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very gentle spin.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave the laundry items to soak for too long.

The programme stops to “Rinse hold” at the

Note:

time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the

(Pause)”

button blinks.

Approx. Programme Duration

(hours : minutes)

Chlorine or perborate bleaches must

“Start

Terminate the “Rinse hold” option:

• Press the will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Start (Pause)”

button; the programme

button.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time by 1 to 23 hours;

• Press the The countdown of the delay time begins; the “Start delay” indication lamp and the dot on the display will keep blinking until the programme starts.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the number of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay” ...before you press the “Start (Pause)” button:

• Turn the programme selector to another position or press the

...after having pressed the “Start (Pause)” button:

• Press the disappears from the display. Press if you want to start the selected programme immediately.

“Start (Pause)”

“Reset”

“Start (Pause)”

button.

“Start (Pause)”

button.

button - the delay time

button, the

“Start (Pause)”

again

PROGRAMME START

Open the tap and press the indication lamp of the The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinsse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“Start (Pause)”

button. The

button lights up.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the programme. The light blinks.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start (Pause)”

button to pause the

button again. The new

RESET A RUNNING PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds;

“Reset”

“rES” appears on the display. The water is drained out; it may last a while until you can open the door.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06367

Black process 45.0° 150.0 LPI