Whirlpool AWO/D 6890, AWO/D 6736 W, AWO/D 6891 INSTRUCTION FOR USE
30106169GB.fm Page 1 Thursday, April 24, 2008 9:22 AM
GB PROGRAMME CHART
A. “Door open” indication
H
}
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
Tempe-
rature
Care
Labels
Max
Load
kg
- Respect the manufacturer’s recommendations on the care label.
C
D
Type of wash/Notes
E
F
E. Programme selector
F. “Start/Pause” button
A
B
G. “Spin” button
H. Programme sequence indicator
I. “Reset” button
I
J L
K
Detergents and additives Special options
Pre-
Main
wash
Softener Eco Pre-
wash
G
J. “Start delay” button
K. “Temperature” button
L. Display
wash
Start
delay
Easy
ironing
Intensive
rinse
Rinse
hold
Spin
Max
Spin
Speed
rpm
White Cotton
Cotton
Synthetics
Daily load
Quick wash
Delicates
Wool
Handwash
Rinse & Spin
Spin
Gentle Spin
Drain
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted in these programmes.
70 - 95 °C
20 - 60 °C
20 - 60 °C
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
20 - 40 °C
——
——
——
——
6.0
Normally to heavily soiled bed linen, table linen and underwear,
towels, shirts etc. made of cotton and linen.
5.0
Normally soiled blouses, shirts, overalls etc. made of polyester
2.5
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
3.0 Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothing made of cotton, polyester , polyamide and
3.0
blends with cotton.
1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.
Only woollens, labelled with the Woolmark and identified as machine
washable.
1.0
This programme (40°C) is tested and approved by The Woolmark
Company for machine washable wool.
Textiles made of linen, silk, wool and viscose marked as
“handwashable”.
1.0
This programme (40°C) is tested and approved by The Woolmark
Company for handwashable wool.
6.0
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the
6.0
“Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the
1.0
“Wool” programme.
Drain only - no spinning. Alternative method of terminating programme
6.0
after “Rinse Hold”.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for
the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are
washed according to the instructions on the garment label and those issued in this programme chart. M0620
Yes
❉
Yes
❉
Yes
—
Yes
—
Yes
❉
Yes
—
Yes
—
——
❉❉❉❉ ❉ ❉❉❉
❉❉❉❉ ❉ ❉❉❉
——
❉
——
❉
—
❉
❉
❉
❉
❉❉
——
——
——
—— — ——
—— — ——
—— — ——
max.
1000
❉❉ ❉❉❉
❉
❉
❉
❉
❉
❉
❉
——
——
——
——
—
❉❉❉
❉❉
❉❉
❉❉
❉❉
———
———
—————
Whirlpool is a registered trademark of Whirlpool USA
max.
max.
1000
1000
400
max.
max.
❉
❉
1000
5019 301 06169
1)
1)
1)
1)
1)
Black process 45.0° 100.0 LPI
30106169GB.fm Page 2 Thursday, April 24, 2008 9:22 AM
CONSUMPTION DATA
Programme
Temperature
(°C)
White Cotton 95 6.0 59
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
1.90 2:00
*
Cotton 60 6.0 49 1.14 2:10
Cotton with “Eco”
***
60 6.0 49 1.02 2:20
Cotton 40 5.0 56 0.70 2:00
Synthetics 60 2.5 50
0.80 1:35
**
Synthetics 40 2.5 46 0.50 1:20
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Delicates 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The time indicated on the display can deviate from the values in the table, because it takes into account the household
*
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the
programme. The display shows the programme
duration in hours and minutes as well as the
predefined temperature. The
2. The
“Temperature” button.
3. The indication lamp of the predefined
lights up; in case you want to set another spin speed,
press the “Spin” button .
programme selector
blinks.
temperature
can be altered by pressing the
to the desired
“Start/Pause”
spin speed
button
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective
indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Prewash” button
• Only for heavily so i led lo ads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash when
activating the Prewash option.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
“Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun
very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helps people with
allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and “Delicates”.
• It is particularly useful if you want to postpone spinning
to a later time, or if you want to drain only.
• If you select “Rins e ho ld”, do not le av e the la undry to
soak for too long.
The programme stops to “Rinse hold” at the
Note:
time the “Rinse hold” light in the programme sequence
indicator is on. The indication lamp next to the
button blinks.
Pause”
Terminate the “Rinse hold” option :
• Press the
will terminate automatically with the final spin cycle for
the present wash programme.
“Start/Pause”
button ; the programme
“Start/
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selec ted, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
“Start/Pause”
button .
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the “Start Delay”.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay time
by 1 to 23 hours;
• Press the
The indication light next to the “Start Delay” button
lights up and the countdown of the delay time begins.
The dot between hours and minutes of the indicated
delay time as well as the light of the start delay button
will keep blinking until the programme starts.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
number of hours preselected can be reduced by pressing
and holding the “Start Delay” button. From 1 hour on,
the delay time can also be reduced by minutes.
To cancel the “Start Delay”
..before you press the “Start/Pause” button :
• Turn the programme selector to another position or
press the
..after having pressed the “Start/Pause” button :
• Press the
the start delay time disappears from the display.
“Start/Pause”
“Reset”
“Reset”
button .
“Start/Pause”
button .
button for at least 3 seconds -
button , the
PROGR AMME START
Open the tap and press the
The indication lamp next to the
lights up. The programme sequence indicator shows
the current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is
the case,
an animation appears on the display
“Start/Pause”
“Start/Pause”
button .
button
.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
programme. The light blinks.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
“Start/Pause”
“Start/Pause”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds.
“Reset”
Any existing water is drained out before the door can
be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06169
Black process 45.0° 100.0 LPI
Loading...