Whirlpool AWO/D 6770 INSTRUCTION FOR USE
30106144GB.fm Page 1 Tuesday, February 26, 2008 6:49 PM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Max
Programme
Cotton /
Antibacterial
40 - 60 - 95 °C
Care
Labels
40 - 60 - 95 °C
Load
kg
7.0
C
D
Type of wash/Notes
- For temperature selection, respect the manufacturer’s recommendations on the
care label
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of
your laundry. The bacteria removal efficiency has been tested following a similar
methodology to the NF EN 13697 standard of Nov. 2001.
H
E
}
F
E. Programme selector
F. “Start/Pause” button
A
B
G. “Spin” button
H. Programme sequence indicator
I. “Reset” button
I
JK
Detergents and additives Special options
Pre-
Main
wash
Yes
Softener Start
❉❉❉❉ ❉ ❉ ❉ ❉
wash
❉
G
Eco Pre-
delay
J. “Start delay” button
K. Time display
Easy
wash
ironing
Intensive
rinse
Rinse
hold
Spin
Max
Spin
Speed
rpm
max.
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
Rinse & Spin
Spin
Short Spin
Drain
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted in these programmes.
30 - 40 - 60 °C
30 - 40 °C
40 °C
30 °C
- 40 °C
40 °C
30 °C
—
—
—
——
Normally soiled blouses, shirts, overalls etc. mad e of pol ye ster (Diolen, Trevira),
3.0
polyamide (Perlon, Nylon) or blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Slightly to normally soiled textiles made of cotton and/or synthetics.
4.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with
4.0
cotton.
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for
1.0
machine washable wool.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for
handwashable wool.
1.0
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is
used in this programme.
This programme is particularly suitable to treat delicate lingerie (use of a laundry net
1.0
strongly recommended).
Same as the last rinse and the final spin in the “Cotton” programme.
7.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
7.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
1.0
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
Yes
❉
Yes
❉
Yes
—
Yes
—
Yes
—
Yes
—
Yes
—
——
———
———
❉❉❉❉ ❉ ❉ ❉ ❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉
❉
—
❉
——
—— — —
—— — —
—— — —
—— — —
—— —
—— — — —
—— — — —
——
—————— — — — — —
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “handwash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0620
max.
❉❉
❉❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉❉
Whirlpool is a registered trademark of Whirlpool USA
1000
max.
max.
1000
400
400
max.
max.
❉
❉
1000
5019 301 06144
1)
1)
1)
1)
1)
Black process 45.0° 100.0 LPI
30106144GB.fm Page 2 Tuesday, February 26, 2008 6:49 PM
CONSUMPTION DATA
Programme
Cotton / Antibacterial 95 7.0 74
Cotton 60 7.0 69 1.33 2:10
Cotton with “Eco”
Cotton 40 7.0 69 0.75 2:05
Synthetics 60 3.0 46
Synthetics 40 3.0 42 0.40 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 40 4.0 48 0.50 1:00
Quick wash 30 4.0 48 0.25 0:30
Wool 40 1.0 60 0.55 0:45
Handwash 40 1.0 45 0.55 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
**
***
Lingerie 30 1.0 45 0.45 0:40
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label.
***
Temperatu r e
(°C)
60 7.0 54 1.19 2:20
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the
programme and temperature.
2. The
programme (in hours and minutes), and the
Pause”
3. The
programme selector
time display
indication lamp is flashing.
indication lamp
lights up.
shows the duration of the chosen
of the predefined spin speed
to the desired
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption can be achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
“Start/
Load
Water
(kg)
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” an d
• Increases the water quantity and the clothes are spun
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
“Rinse hold” button
• The laundry remains in the last rinse water without
• This option is particularly recommended for the
• It is particularly useful if you want to postpone spinning
Terminate the “Rinse hold” option :
• Press the
• If you do not wish to spin the clothes, turn the
Energy
(l)
(kWh)
2.10 2:10
**
0.80 1:35
**
“Daily load” programmes to make ironing easier.
very gently.
water, washing baby linen and helps people with allergies.
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
programmes “Synthetics”, “Daily load” and “Delicates”.
to a later time, or if you want to drain only.
The programme stops to “Rinse hold” at the
Note:
time the “Rinse hold” light in the programme sequence
indication is on. The indication lamp next to the
button flashes.
Pause”
“Start/Pause”
will terminate automatically with the final spin cycle for
the present wash programme.
programme selector knob to the “Drain” programme
and press the
Approx. Programme Duration
(hours : minutes)
button ; the programme
“Start/Pause”
button .
*
“Start/
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
START DELAY
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time
by 1 to 23 hours;
• Press the
The indication light next to the “Start delay” button
lights up and the countdown of the delay time begins.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
the number of hours preselected can be reduced by
pressing again the “Start delay” button.
To cancel the “Start delay”
..before you press the “Start/Pause” button :
• Turn the programme selector to another position or
press the
..after having pressed the “Start/Pause” button :
• Press the
the start delay time disappears from the time display.
“Start/Pause”
“Reset”
“Reset”
button .
“Start/Pause”
button .
button for at least 3 seconds -
button ,
PROGR AMME START
Open the tap and press the
The indication lamp next to the
lights up. The programme sequence indicator shows
the current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme time.
Due to variations in load and temperature of inlet water,
the remaining time is newly calculated in certain
programme phases. If this is the case, an animation appears
on the time display.
“Start/Pause”
“Start/Pause”
button .
button
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
programme. The light flashes.
2. Select the new programme (with temperature), any
options and another spin speed if you want.
3. Press the
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
“Start/Pause”
“Start/Pause”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
end.
• Press the
button cancels a programme before the
“Reset”
button for at least 3 seconds.
“Reset”
Any existing water is drained out before the door can
be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06144
Black process 45.0° 100.0 LPI
Loading...