Whirlpool AWO/D 63205, AWO/D 65205 INSTRUCTION FOR USE
GB
PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
C
D
E
H
A
B
I
F
J
Detergents and Additives Special options Max
Programme
Cotton/ Antibacterial
95 °C
Cotton
40 - 60 °C
SuperEco
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
Care
Labels
40-60-95 °C
60 °C
30-40-60 °C
30 - 40 °C
40 °C
30 °C
- 40 °C
40 °C
30 °C
Max.
Load
kg
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
6.0
Selecting “Cotton 95°, this programme eliminates bacteria, ensuring sanitization of your
laundry. The bacterial removal efficiency has been tested following a similar methodology to
the NF EN 13697 standard of Nov. 2001
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash duration. Ideal to be run
6.0
overnight to additionally profit from the more favourable energy rates.
To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the
morning, or define programme start with “Start Delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
2.5
polyamide (Perlon, Nylon) or blends with cotton.
- respect the manufacturer's recommendations on the care label
Type of wash / Notes
1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.
3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes
3.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. – Yes
Only woollens labelled with the woolmark and identified as machine washable.
1.0
This programme (40°) is tested and approved by The Woolmark Company for machine
washable wool.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0
This programme (40°) is tested and approved by The Woolmark Company for hand-washable
wool.
This programme is particurarly suitable to treat delicate lingerie (use of laundry net
1.0
strongly recommended).
Rinse & Spin – 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – –
Spin – 6.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – –
Drain – – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”. – – –
: option / Yes : dosing required
1)
For improved garment care spin speed is restricted in these programmes.
The wool and handwash cycles of this machnes have been tested and approved by The Woolmark Company for the
washing of Woolmark garments labeled as “machine wash” or “hand wash” provided that the garments are washed
according to the instructions on the garment label and those issued in this programme chart.
M0619
K
Pre-
wash
– Yes
– Yes
– Yes
– Yes
Main
Wash
Yes
Yes
Yes
E. Programme selector
F. “Start/Pause” button
G. Spin speed selector
H. Programme sequence indicator
I. “Reset” button
J. “Start delay ” button
G
Softener Start
delay
K. Time display
Clean+ Pre-
– – –
–
– –
– – – –
– – – –
– – – –
– – – –
– – –
– – – – –
– – – – – – –
Easy
wash
ironing
Intensive
rinse
Rinse
hold
– –
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01112
Variable
spin
Spin
Speed
rpm
Max.
Max.
1000
1000
Max.
Max.
1000
400
400
Max.
Max.
1)
1)
1)
1)
1)
CONSUMPTION DATA
Programme
Cotton / Antibacterial 95 6.0 59** 1.90 2:00
Cotton *** 60 6.0 49 1.02 2:20
Cotton 40 6.0 54 0.65 2:00
Super Eco 60 6.0 51 0.72 4:00
Synthetics 60 2.5 50** 0.70 1:30
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50 0:45
Daily load 40 3.0 45 0.45 1:00
Quick wash 30 3.0 40 0.40 0:30
Wool
Handwash 40 1.0 45 0.60 0:40
Lingerie 30 1.0 45 0.50 0:36
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Temperature
(°C)
40 1.0 55 0.60 0:45
Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the
programme selector to the desired
programme and temperature.
time display shows the duration of the
2. The
chosen programme (in hours and minutes), and
the “Start/Pause
3. The indication lamp of the predefined
” indication lamp is blinking.
spin speed
lights up.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch
off automatically. Unsuitable combinations of options
are deselected automatically.
“Clean+” button
• Choose this option if you use an in-wash additive
for stain removal (powder, for example “Vanish”)
- it will optimize the additive’s efficiency to get
better wash performance and stain removal.
• Selectable for programmes “
“Synthetics”;
choose temperature of 30 or 40°C
Cotton” and
and use with maximum load.
• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option).
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
(hours : minutes)*
• Prolongs the programme by approx. 10 to 15
minutes.
• Appropriate for use of stain removers and
bleaches on oxygen basis. Chlorine or perborate
bleaches must not be used!
“Prewash”
button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the “Prewash” option.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics”
and “Daily load” programmes to make ironing
easier.
• Increases the water quantity and the clothes are
spun very gently.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
•
It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
Duration
Respect the manufacturer’s dosing instructions.
• If you select “Rinse hold” do not leave items to
soak for too long.
Note:
The programme stops to “Rinse hold” at
the time the “Rinse hold” lights in the programme
sequence indication is on. The indication lamp
next to the “Start/Pause”
button blinks.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause”
“Variable spin”
button
button.
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
START DELAY
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
Do not use liquid detergent
when activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay
time by 1 to 23 hours.
• Press the “Start/Pause” button.
The countdown of the delay time begins; the
“Start delay ” indication lamp and the dot on the
display will keep blinking until the programme
starts.
• The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the “Start/Pause” button,
the number of hours preselected can be reduced
by pressing again the “Start delay ” button.
To cancel the “Start delay”
...before you press the “Start/Pause” button:
• Turn the programme selector to another position
or press the “Reset”
button.
...after having pressed the “Start/Pause” button:
• Press the “Reset” button for at least 3 seconds
- the start delay time disappears from the time
display
PROGRAMME START
.
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause”
button lights up. The programme sequence indicator
shows the current programme phase, running from
left to right through Wash, Rinse, Spin/Drain.
The time display shows the remaining programme
time. Due to variations in load and temperature of
inlet water, the remaining time is newly calculated
in certain programme phases. If this is the case, an
animation appears on the time display.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show the the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel (Reset)
a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for
Use”; if the fault persists, contact our After Sales
Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap: if the indications still lights
up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned:
in the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before
the end.
• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door
can be opened.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01112
Loading...