Whirlpool AWO/D 6127, AWO/D 6107 INSTRUCTION FOR USE

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

Care

Labels

Max. Load

Cotton

95°C

Cotone

95°C

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be

7.0

used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.

Cotton

60 - 40 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin

Spin Centrifuga

Gentle Spin Centrifuga breve

Drain Scarico acqua

i : option / Yes : dosing required

1) For improved garment care spin speed is restricted in these programmes.

Cotone

60 - 40 °C

Sintetici

30 - 40 - 60 °C

Delicati

30 - 40 °C

40 °C

Rapido

30 °C

Lana

a freddo - 40 °C

Lavaggio a mano

40 °C

Lingerie

30 °C

Risciacquo &

Centrifuga

7.0

3.0

1.5

4.0

1.0

– 7.0

– 1.0

– –

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends. Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry.

Only woollens, labelled with the Woolmark and identified as machine washable.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme is particurarly suitable to treat delicate lingerie (use of laundry net strongly recommended).

Same as the last rinse and the final spin in the “Cotton” programme.

Intensive spin. Same as the spin cycle in the “Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

Type of wash / Notes

- respect the manufacturer's recommendations on the care label

Detergents and Additives

Pre-

wash

–

– –

– – –

Main

Wash

Yes

E. Programme selector

F. “Start(Pause)” button

G. Spin speed selector

H. Programme sequence indicator and Start delay indication

I. “Reset” button

J. “Start delay” button

Softener Start

ritardato

i i

i i i i i i i

i i

delay

Avvio

Rapid

Rapido

Special options

Pre-

Intensive

wash

lavaggio

–

– –

– – –

– –

– – – –

– – – – – –

risnse

Pre-

Risciacquo

intensivo

i i i i

Rinse

hold

Anti

piega

–

i i i

i i

Spin

Centri-

fuga

variabile

Max.

Spin

Speed

rpm

Max.

1000

Max.

1000

400

Max.

1000

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01294

CONSUMPTION DATA

Programme

Cotton

Cotton ** Cotton **

Cotton

Cotton ** Synthetics Synthetics

Delicates

Daily load

Quick wash

Wool

Handwash

Lingerie

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the

home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). *

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Reference programmes for Energy Label.

*** Automatic adaptation of programme duration after detection of wash load

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

dd detergents as indicated on the front page and as

Temperature

(°C)

95 7.0 74* 2.10 2:10 60 7.0 54 1.05 4:00 2:30 60 3.5 40 0.85 3:00 *** 40 7.0 69 0.80 3:15 2:15 40 3.5 40 0.65 3:00 *** 60 3.0 50* 0.80 1:35 1:14 40 3.0 46 0.50 1:20 0:59 30 1.5 60 0.50 0:45 40 4.0 45 0.50 1:00 30 4.0 45 0.40 0:30 40 1.0 60 0.50 0:45 40 1.0 45 0.50 0:40 30 1.0 45 0.40 0:36 -

described in the chapter “Detergent and Additives” in your Instructions for Use.

•

Turn the programme selector to the desired

programme and temperature.

•

The “Start(Pause)” indication lamp is blinking

and the indication lamp of the predefined spin

speed lights up.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Rapid” button

• Enables quicker washing by shortening the

programme duration.

• Recommendable for small loads or only lightly

soiled laundry.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash

Load

(kg)

Water

(l)

Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without pregressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone

• If you select “Rinse hold” do not leave items to

soak for too long. Note: The programme stops to “Rinse hold” at

sequence indication is on. The indication lamp next to the “

Terminate the “Rinse hold” option:

• will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “

Energy

(kWh)

without “Rapid”

spinning to a later time, or if you want to drain only

the time the “Rinse hold” lights in the preogramme

Press the “

Start(Pause)

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

Start(Pause)

” button blinks.

” button; the programme

Start(Pause)

” button.

when activating the “Prewash” option.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay

time by 1, 3, 6, 9 or 12 hours.

• Press the “

Start(Pause)

” button.

The indication neto to the “Start delay” button lights up and goes off when the programme starts.

• Once having pressed the “

Start(Pause)

the countdown of the time delay begins. When the programme starts, the start delay indicator lights goes off and is replaced by the programme sequence indications.

• After the “

Start(Pause)

button has been pressed, the number of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay” ..before you press the “

Start(Pause)

” button:

• Turn the programme selector to another position or press the “Reset” button.

..after having pressed the “

Start(Pause)

• Press the “Reset” button for at least 3 second

- the start delay indicator light goes out.

PROGRAMME START

Open the tap and press the “ The indication lamp next to the “

Start(Pause)

button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

• When the programme phrase is finised, the

corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

” button,

” button:

” button.

”

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “

Start(Pause)

” button to pause the

programme. The light blinks.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “

Start(Pause)

” button again.

The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds. Any existing water is drained out. It may last some time until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01294