Whirlpool AWO/D 6109 INSTRUCTION FOR USE

PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

Cotton

with prewash

95 °C

Cotton

40 - 60 - 95 °C

Synthetics

with prewash

60 °C

Synthetics

30 - 40 - 60 °C

Algod.

95 °C

Algod.

40 - 60 - 95 °C

Sintéticos

60 °C

Sintéticos

30 - 40 - 60 °C

Care

Labels

A B

Max. Load

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen,

5.0

table linen, underwear, shirts etc.).

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of

6.0

cotton and linen.

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

2.5

(Perlon, Nylon) or blends with cotton.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

2.5

polyamide (Perlon, Nylon) or blends with cotton.

- respect the manufacturer's recommendations on the care label

Type of wash / Notes

E. Programme selector

F. “Start/Pause” button

G. Programme sequence indicator

H. “Reset” button

Detergents and Additives Special options

Main

Pre-

wash

Yes Yes

– Yes

Yes Yes

– Yes

Softener Half load

Wash

Carga

  

Rinse hold

Paro cuba

llena/cheia

Max. Spin

Speed

rpm

Max.

Delicates

30 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

30 - 40 °C

Rinse & Spin Aclar./enx. & Centrif.

Spin Centrif.

Gentle Spin Centrif. Suave

Drain Desagüe/Drenag.

 : option / Yes : dosing required

Do not use liquid detergent.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Delicados

30 °C

Rápido

30 °C

Lana/lã

Frío - 40 °C

A mano/mão

30 - 40 °C

1.5

3.0

1.0

– 5.0

– 1.0

– –

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

– Yes

– –

– – – – – Max.

– – – – – –



Whirlpool is a registered trademark of Whirlpool USA.

–



Max.

400

Max.

5019 301 01155

CONSUMPTION DATA

Programme

Temperature

Load

Water

Energy

Approx. Programme

Duration

(°C)

(kg)

(l)

(kWh)

(hours : minutes)

Cotton 95 6.0 59 * 1.90 2:00

Cotton ** 60 6.0 49 1.02 2:20

Cotton 40 6.0 54 0.65 2:00

Synthetics 60 2.5 50 * 0.70 1:30

Synthetics 40 2.5 45 0.55 1:15

Delicates 30 1.5 50 0.50 0:45

Quick wash 30 3.0 40 0.40 0:30

Wool

40 1.0 55 0.60 0:45

Handwash 40 1.0 45 0.60 0:40

Handwash 30 1.0 45 0.50 0:36

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ** Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergents as indicated on the front page and as described in your Instructions for Use. Close the door and turn the programme selector to the desired programme and temperature. The indication lamp next to the “Start/Pause” button flashes.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Half load” button

• Reduces water consumption, above all during rinsing.

• Suitable for lightly soiled laundry and small loads (max. 3 kg).

“Rinse hold” button

• The laundry remains in the last rinse water

without pregressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave items to soak for too long. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” lights in the programme sequence indication is on. The indication lamp next to the “Start/Pause”

button blinks.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the

programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button

PROGRAMME START

Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/

Pause”

button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste

water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence

indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01155