Whirlpool AWO/D 6100 COMFORT, AWO/D 6120COMF. INSTRUCTION FOR USE
GB
PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Care
Programme
Cotton
40 - 60 - 95 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
40 - 60 - 95 °C
30 - 40 - 60 °C
30 - 40 °C
40 °C
30 °C
- 40 °C
40 °C
30 °C
Labels
H
C
D
A
B
I
E
Max.
Load
kg
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
6.0
cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
2.5
(Perlon, Nylon) or blends with cotton.
1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.
3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes
3.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. – Yes
1.0 Only woollens labelled with the woolmark and identified as machine washable. – Yes
1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. – Yes
This programme is particurarly suitable to treat delicate lingerie (use of laundry net strongly
1.0
recommended).
- Respect the manufacturer's recommendations on the care label
Type of wash / Notes
F
Detergents and Additives Special options Max
Prewash
Wash
– Yes
G
Main
Softener Prewash Intensive
Yes
Yes
Yes
E. Programme selector
F. “Start/Pause” button
G. “Variable spin” button
H. Programme sequence indicator
I. “Reset” button
rinse
–
– –
– –
– –
– –
Rinse
hold
–
Variable
spin
Spin Speed
rpm
Max.
1)
1000
1)
1000
Max.
Max.
1)
1000
1)
400
1)
400
Rinse & Spin – 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – –
Spin – 6.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – – – – –
Gentle Spin – 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. – – – – – –
Drain – – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”. – – – – – – – –
: option / Yes : dosing required
1)
For improved garment care spin speed is restricted in these programmes.
–
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01099
Max.
Max.
1000
1)
CONSUMPTION DATA
Programme
Cotton 95 6.0 59 * 1.90 2:00
Cotton ** 60 6.0 49 1.02 2:20
Cotton 40 6.0 54 0.65 2:00
Synthetics 60 2.5 50 * 0.70 1:30
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50 0:45
Daily load 40 3.0 45 0.45 1:00
Quick wash 30 3.0 40 0.40 0:30
Wool
Handwash 40 1.0 45 0.60 0:40
Lingerie 30 1.0 45 0.50 0:36
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
*
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
Turn the
programme and temperature.
The
indication lamp of the predefined spin speed lights up.
Push the button(s) of any option(s) desired - the
respective indication lamp lights up. When the
combination of programme and additional option(s)
is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
programme selector to the desired
“Start/Pause” indication lamp is blinking and the
SELECT ANY DESIRED OPTION
Temperature
(°C)
40 1.0 55 0.60 0:45
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
(hours : minutes)
“Intensive rinse” button
• More water is added and rinse cycle is
prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain
only.
Duration
• If you select “Rinse hold” do not leave items to
“Prewash”
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the “Prewash” option.
button
soak for too long.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp
next to the “Start/Pause” button blinks.
Terminate the “Rinse hold” option:
•
Press the “Start/Pause” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause”
button.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
PROGRAMME START
Open the tap and press the “Start/Pause”
button. The indication lamp next to the “Start/
Pause” button lights up. The programme
sequence indicator shows the current programme
phase, running from left to right through Wash,
Rinse, Spin/Drain.
When the programme phrase is finised, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show the the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open
it during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be
caused by a fault in an electrical component.
Refer to the “Troubleshooting Guide” in your
“Instructions for Use”; if the fault persists, contact
our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap: if the indications still lights
up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether
the drain hose is kinked or the filter must be
cleaned: in the latter case refer to the Instructions
for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again.
The new programme continues at the same
position where the previous programme was
interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before
the end.
• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the
door can be opened.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01099
Loading...