Whirlpool AWO/D 4720/P, AWO/D 4520/P INSTRUCTION FOR USE

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

PROGRAMME CHART

C D

E. Programme selector

F. “Start/Pause” button

A B

G. Spin speed selector

H. Programme sequence indicator

I. “Reset” button

J. “Start delay” button

K. Time display

Programme

Care

Labels

Max. Load

- respect the manufacturer's recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels,

Cotton

40 - 60 - 95 C

Bawełniane

40 - 60 - 95 C

shirts etc. made of cotton and linen.

6.0

With heavily soiled laundry the additional “Prewash” option can be selected as well.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and/or linen.

Super Eco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

Spin Wirowanie

Drain Wypompowanie

 : option / Yes : dosing required

For improved garment care spin speed is restricted in this programme.

Super Eco

60 °C

Syntetyczne

30 - 40 - 60 °C

Delikatne

30 - 40 °C

Codzienne

40 °C

Program szybki

30 °C

Wełniane

zimna woda - 40 °C

Pranie rêczne

30 - 40 °C

Płukanie i wirowanie

– 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – –

– 6.0

– –

Offers highest economy in energy consumption by prolonged wash duration. Ideal

6.0

to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly. Use with maximum load.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

2,5

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes

Shortly worn outer clothing made of cotton, polyester, polyamide and

3.0 blends with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and

1.0 identified as machine washable.

1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. – Yes

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.

Type of wash / Notes

Detergents and Additives Special options Max

Pre-

Main

wash

Wash

Yes



– Yes

Yes



Yes



– Yes

– – –

Softener Start

Opóźnienie

delay

startu

Clean+

Pre-

wash

Pranie

wstêpne

zanieceń

       

 

– – –

       

 



–



– –

– – – –

– – –

– – – – –

– – – – – – –

Intensive

Easy

ironing

Bez

p³ukanie

rinse

Super

Rinse

hold

Stop

p³ukanie

Variable

spin

Wirowanie

  

– –

 

   

 

  

Whirlpool is a registered trademark of Whirlpool USA.

Spin

Speed

rpm

Max.

1000

Max.

1000

400

Max.



5019 301 01092

CONSUMPTION DATA

Programme

Cotton 95 6.0 59 ** 1.90 2:00

Cotton *** 60 6.0 49 1.02 2:20

Cotton 40 6.0 54 0.65 2:00

SuperEco 60 6.0 51 0.72 4:00 Synthetics 60 2.5 50 ** 0.70 1:30 Synthetics 40 2.5 45 0.55 1:15

Delicates 30 1.5 50 0.50 0:45 Daily load 40 3.0 45 0.45 1:00

Quick wash 30 3.0 40 0.40 0:30

Wool Handwash 40 1.0 45 0.60 0:40 Handwash 30 1.0 45 0.50 0:36

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. **

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*** Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Temperature

(°C)

40 1.0 55 0.60 0:45

Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the programme and temperature.

2. The chosen programme (in hours and minutes), and the “Start/Pause

3. The indication lamp of the predefined spin speed

programme selector to the desired

time display shows the duration of the

” indication lamp blinks.

lights up.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lamp lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash”

• Only for heavily soiled loads (for example sand,

button

granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”)

- it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Selectable for programmes “Cotton” and

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

(hours : minutes)*

Synthetics”; choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

•

Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate

bleaches must not be used!

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics”

and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water

without pregressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”,“Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave items to

soak for too long.

Duration

Note: The programme stops to “Rinse hold” at the time the “Rinse hold” lights in the preogramme sequence indication is on. The indication lamp next to the “Start/Pause” button blinks.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme

will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause”

“Variable spin”

button

button.

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. when activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay

time by 1 to 23 hours.

• Press the “Start/Pause” button. The countdown

Do not use liquid detergent

of the delay time begins; the “Start delay” indication lamp and the dot on the display will keep blinking until the programme starts.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the “Start/Pause” button, the number of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay” ...before you press the “Start/Pause” button:

• Turn the programme selector to another position or press the “Reset” .

..after having pressed the “Start/Pause” button:

button.

• Press the “Reset” button for at least 3 seconds

- the start delay time disappears from the time display

PROGRAMME START

Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light blinks.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “Start/Pause” programme continues at the same position where

button again. The new

the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01092