Whirlpool AWO/D42200/1, AWO/D 42100/1, AWO/D 42000/1 W INSTRUCTION FOR USE

30106237GB.fm Page 1 Tuesday, January 13, 2009 3:26 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication

D. “Clean pump” indication

Max

Programme

Cotton /

Antibacterial

95 °C

Cotton

60 °C

Cotton

40 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin

Spin

Drain

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted to 1000 rpm in this programme.

For improved garment care, spin speed is restricted to 400 rpm in this programme.

95 °C

60 °C

40 °C

60 °C

30 - 40 - 60 °C

30 - 40 °C

40 °C

30 °C

- 40 °C

40 °C

30 °C

Care

Labels

— — ——

Load

- For temperature selection, respect the manufacturer’s recommendations on the care label

6.0

Normally to heavily soiled bed linen, table linen and underwear , towels, shirts etc. made of cotton and linen. Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your laundry . The

7.0

bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

5.0

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and/or linen.

Offers highest economy in energy consumption by prolonged wash duration. Ideal to be run overnight to

6.0

additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,

2.5

Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Slightly to normally soiled textiles made of cotton and/or synthetics.

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

3.0

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

1.0

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

1.0

If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.

This programme is particularly suitable to treat delicate lingerie (use of a laundry net strongly

1.0

recommended).

Same as the last rinse and the final spin in the “Cotton” programme.

7.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

7.0

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

C D

Type of wash/Notes

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0620

}

E. Programme selector F. “Start (Pause)” button

A B

J K

Detergents and additives Special options

Pre-

Main wash

Yes

Softener

❉❉❉❉ ❉ ❉❉❉

❉❉

❉❉❉❉ ❉ ❉❉❉

❉❉

❉❉ ❉❉

❉❉

wash

❉

—

❉

—

— —

—— —— — —— —

Start

delay

❉ ❉

G. Spin speed selector H. Programme sequence indicator

I. “Reset” button J. “Start delay” button K. Time display

Eco Pre-

wash

Easy

ironing

Intensive

—— —

—

❉

——

❉❉❉❉

—— — —

—— — — —— — —

—— — —— — — — —— — — — — —

Whirlpool is a registered trademark of Whirlpool USA

Rinse

Variable

rinse

hold

spin

❉❉❉

❉❉

❉❉ ❉❉

❉❉❉

❉

5019 301 06237

Max Spin

Speed

rpm

max.

1000

max.

1000

400

max. max.

Black process 45.0° 150.0 LPI

30106237GB.fm Page 2 Tuesday, January 13, 2009 3:26 PM

CONSUMPTION DATA

Programme

Cotton / Antibacterial 95 6.0 59

Cotton 60 6.0 49 1.14 2:10

Cotton with “Eco”

Cotton 40 5.0 56 0.70 2:00 SuperEco 60 6.0 49 0.72 4:00 Synthetics 60 2.5 50 Synthetics 40 2.5 46 0.50 1:20

Delicates 30 1.5 60 0.50 0:45

Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.40 0:30

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* **

***

Lingerie 30 1.0 45 0.40 0:40

The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label.

***

Temp e r a t u r e

(°C)

60 7.0 54 1.19 2:20

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the programme and temperature.

2. The programme (in hours and minutes), and the

(Pause)”

3. The lights up.

programme selector

time display

indication lamp

shows the duration of the chosen

indication lamp is flashing.

of the predefined spin speed

to the desired

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

• With a modified temperature profile and a slightly

prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption can be achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by approximately 15 min.

“Start

Load

Water

(kg)

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” an d

• Increases the water quantity and the clothes are sp un

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Rinse hold” button

• The laundry remains in the last rinse water without

• This option is particularly recommended for the

• It is particularly useful if you want to postpone spinning

Terminate the “Rinse hold” option :

• Press the

• If you do not wish to spin the clothes, turn the

Energy

(l)

(kWh)

1.90 2:00

0.80 1:35

“Daily load” programmes to make ironing easier.

very gently.

water, washing baby linen and helps people with allergies.

progressing to the final spin cycle to avoid creasing and prevent colours from changing.

programmes “Synthetics”, “Daily load” and “Delicates”.

to a later time, or if you want to drain only.

The programme stops to “Rinse hold” at the

Note:

time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the

(Pause)”

programme will terminate automatically with the final spin cycle for the present wash programme.

programme selector knob to the “Drain” programme and press the

button flashes.

“Start (Pause)”

Approx. Programme Duration

(hours : minutes)

button ; the

“Start (Pause)”

button .

“Start

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time by 1 to 23 hours;

• Press the The indication light next to the “Start delay” button lights up and the countdown of the delay time begins.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the

by pressing again the “Start delay” button.

To cancel the “Start delay” ..before you press the “Start (Pause)” button :

• Turn the programme selector to another position or press the

..after having pressed the “Start (Pause)” button :

• Press the the start delay time disappears from the time display.

“Start (Pause)”

, the number of hours preselected can be reduced

“Reset”

button .

“Start (Pause)”

button .

button for at least 3 seconds -

button

PROGR AMME START

Open the tap and press the The indication lamp next to the

lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“Start (Pause)”

button .

button

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start (Pause)”

button to pause the

button again. The

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds.

“Reset”

Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06237

Black process 45.0° 150.0 LPI