Whirlpool AWO/D 10661 INSTRUCTION FOR USE

30106177GB.fm Page 1 Monday, April 28, 2008 9:40 AM

GB

A.“On/Off” button

B.Programme selection buttons

C.Option buttons

D.“Favourite” button

E.“Temperature” button

F.“Start delay” button

G.“Variable spin” button

H.“Start/Pause” button

I.“Drain/Reset” button

J.Display

			Tempe-		Max
				Care	Load
			rature
	Programme
				Labels
					kg
	Cotton /	3DPXNOX	70 - 95 °C		7.0
	Antibacterial	$QWLEDNWHUL\HO
	Cotton	3DPXNOX	20 - 60 °C		7.0
	Synthetics	6HQWHWLNOHU	20 - 60 °C		3.5
	Daily load	*•QO•N oDPDúÕU	20 - 60 °C		5.0
	Quick wash	+Õ]OÕ \ÕNDPD	20 - 30 °C		5.0
	(30 min.)	GDN
	Delicates	1DULQOHU	20 - 40 °C		2.5
	Wool	<•QO•OHU	20 - 40 °C		2.0
	Handwash	(OGH \ÕNDPD	20 - 40 °C		2.0
	(Lingerie)	%D\DQ Lo oDPDúÕUÕ
	SuperEco		20 - 60 °C		7.0
	Spin	6ÕNPD	—	—	7.0
	Rinse & Spin	'XUXODPD 6ÕNPD	—	—	7.0
	Drain	%RúDOWPD	—	—	—
: optional / Yes : dosing required
1)	For improved garment care, spin speed is restricted in these programmes.
2)	Do not use liquid detergent when activating the “Start Delay”.
3)	Do not use liquid detergent for the main wash when activating the “Prewash” option.

PROGRAMME CHART

	H	B			J L	K
				}	}
			C
					M
D		I			E	F
		A

	K. Programme sequence indication
N	L. “Door open” indication
O M. “Buttons locked” indication
P	Your washing machine is equipped with
	automatic safety functions which detect
	and diagnose faults at an early stage
	and react appropriately, e.g.:
G	N. “Water tap closed” indication
	O. “Clean pump” indication
	P. “Service” indication

Type of wash/Notes

Detergents and additives

Special options

Start

Spin

delay

Pre-

Main

Softener

Eco

Easy

Pre-

Intensive

Rinse

Variable

Max

- For temperature selection, respect the manufacturer’s

wash

wash

ironing

wash

rinse

hold

spin

Spin

(NR

.ROD\

gQ

<R÷XQ

6XGD

*HFLNPHOL

6ÕNPD

Speed

recommendations on the care label

•W•OHPH

\ÕNDPD

GXUXODPD

EHNOHWPH

EDúODWPD

+Õ]Õ

rpm

Normally to heavily soiled bed linen, table linen and underwear,

towels, shirts etc. made of cotton and linen.

At a temperature of 80°C or more, this programme eliminates

3)

Yes

max.

bacteria, ensuring sanitization of your laundry. The bacteria removal

efficiency has been tested following a similar methodology to the

NF EN 13697 standard of Nov. 2001.

Normally soiled blouses, shirts, overalls etc. made of polyester

3)

Yes

1000 1)

(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics.

—

Yes

—

—

max.

Shortly worn outer clothing made of cotton, polyester, polyamide

—

Yes

—

—

—

—

max.

and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

3)

Yes

—

—

—

1000 1)

Only woollens, labelled with the Woolmark and identified as

machine washable.

—

Yes

—

—

—

—

1000 1)

This programme (40°C) is tested and approved by The Woolmark

Company for machine washable wool.

Textiles made of silk, linen, wool and viscose marked as

“handwashable”.

Up to a temperature of 30°C, this cycle is particularly suitable to

—

Yes

—

—

—

—

400 1)

treat delicate lingerie (use of a laundry net strongly recommended).

This programme (40°C) is tested and approved by The Woolmark

Company for handwashable wool.

Slightly to normally soiled bed linen, table linen and underwear,

towels, shirts etc. made of cotton and/or linen.

Offers highest economy in energy consumption by prolonged wash

—

Yes

—

—

—

max.

duration. Ideal to be run overnight to additionally profit from the more

favourable energy rates. To avoid noise of spinning at night, set spin

speed to “0” and start spin programme in the morning, or define

programme start with “Start Delay” accordingly.

In this programme spinning is intensive. Same as the spin cycle in the

—

—

—

—

—

—

—

—

max.

“Cotton” programme.

Same as the last rinse and the final spin in the “Cotton” programme.

—

—

—

—

—

max.

Drain only - no spinning. Alternative method of terminating programme

—

—

—

—

—

—

—

—

—

—

—

after “Rinse Hold”. Press “Reset/Drain” and then “Start/Pause” to start

the “Drain” programme.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of

Whirlpool is a registered trademark of Whirlpool USA

Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the

instructions on the garment label and those issued in this programme chart. M0619

5019 301 06177

Black process 45.0° 100.0 LPI

30106177GB.fm Page 2 Monday, April 28, 2008 9:40 AM

CONSUMPTION DATA

	Programme	Temperature	Load	Water	Energy	Approx. Programme Duration
		(°C)	(kg)	(l)	(kWh)	(hours : minutes)*
	Cotton / Antibacterial	95	7.0	70**	2.10	2:10
	Cotton	60	7.0	65	1.33	2:10
	Cotton with “Eco”***	60	7.0	60	1.19	2:20
	Cotton	40	7.0	65	0.75	2:05
	Synthetics	60	3.5	48**	0.95	1:35
	Synthetics	40	3.5	44	0.55	1:20
	Daily load	40	5.0	66	0.60	1:00
	Quick wash (30 min.)	30	5.0	60	0.30	0:30
	Delicates	30	2.5	60	0.45	0:50
	Wool	40	2.0	60	0.65	0:45
	Handwash	40	2.0	45	0.65	0:40
	Handwash (Lingerie)	30	2.0	45	0.35	0:36
	SuperEco	60	7.0	62	0.84	4:00

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***Reference Programme for Energy Label.

					“Intensive rinse” button
	ADD DETERGENTS, CLOSE THE DOOR
					• More water is added and rinse cycle is prolonged.
	AND SELECT THE PROGRAMME
	Add detergent as indicated on the front page and as				• This option is particularly suitable for areas with very
					soft water or for washing baby linen, and helps people
	described in the chapter “Detergent and Additives” in
					with allergies.
	your Instructions for Use.
	1.	Push the “On/Off” button	. The blue light circle		“Rinse hold” button
		signals that the washer is switched on.			• The laundry remains in the last rinse water without
	2.	Select the desired programme by pushing the			progressing to the final spin cycle to avoid creasing and
		corresponding programme button; it is marked by a
					prevent colours from changing.
		blue light.
					• This option is particularly recommended for the
	3. The temperature and spin speed indicated on the
					programmes “Synthetics”, “Daily load” and “Delicates”.
		display can be altered by pressing the “Temperature”
		button or the “Variable spin” button		.	• It is particularly useful if you want to postpone spinning
					to a later time, or if you want to drain only.
	SELECT ANY DESIRED OPTION
					• If you select “Rinse hold”, do not leave the laundry to
	When the combination of programme and additional
					soak for too long.
	option(s) is not possible, the indication lights switch off
					Note: The programme stops to “Rinse hold” at the time
	automatically. Unsuitable combinations of options are
					the “Rinse hold” symbol on the display lights up. The blue
	deselected automatically.
					light under the “Start/Pause” button		flashes.
	“Eco” button
	• With a modified temperature profile and a slightly				Terminate the “Rinse hold” option:
		prolonged washing duration, the optimum			• Press the “Start/Pause” button		; the programme
		combination of excellent washing result and even			will terminate automatically with the final spin cycle for
		lower energy consumption is achieved.
					the present wash programme.
	“Easy ironing” button
					• If you do not wish to spin the clothes, push the “Drain/
	• Can be used together with “Cotton”, “Synthetics” and
					Reset” button and then the “Start/Pause”
		“Daily load” programmes to make ironing easier.
					button	to start the Drain programme.
	• Increases the water quantity and the clothes are spun
		very gently.			“Variable spin” button
	“Prewash” button				• Every programme has a predefined spin speed.
	• Only for heavily soiled loads (for example sand,				• Press the button to set another spin speed.
		granular dirt) sensible. Increases the cycle time by
					• If spin speed “0” is selected, the final spinning is
		approximately 15 min.
					cancelled but intermediate spin peaks remain during
	• Do not use liquid detergent for the main wash when
					rinse. The water is drained out only.
		activating the Prewash option.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

•Select the desired programme, temperature, spin speed and option(s), push and hold the “Favourites” button for at least 3 seconds. The lamp next to “Favourites” shortly flashes and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the “Favourites” button and start by pushing “Start/Pause” .

If you want to replace the saved programme setting by another one:

•Push the programme button, select temperature, spin speed and options as desired and then press and hold the “Favourites” button for at least 3 seconds. The previously saved programme setting will be replaced by the new one.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

•Select programme, temperature, spin speed and options.

•Press the “Start Delay” button to select the delay time up to 23 hours.

•Press the “Start/Pause” button .

The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes flash.

•The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

•Once having pressed the “Start/Pause” button , the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start Delay”

..before you press the “Start/Pause” button:

• Select another programme or press the “Drain/ Reset” button.

..after having pressed the “Start/Pause” button:

•Press the “Drain/Reset” button - the start delay time disappears from the display.

PROGRAMME START

Open the tap and press the “Start/Pause” button . The blue light under the “Start/Pause” button is on. The programme sequence indicator shows the current programme phase, running from top to bottom through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and

must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

LOCK BUTTONS

You can lock the buttons of the control panel against improper use (e.g. by children).

•Press the temperature and the spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up.

•To unlock the buttons again: proceed in the same way.

RED INDICATIONS ON THE DISPLAY

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

PROGRAMME END

•The symbols of the programme sequence indicator are dark, and the “Door open” symbol lights up.

1.Switch the machine off by pushing “On/Off” .

2.Close the water tap.

3.Open the door and unload the machine.

4.Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to pause the programme. The light flashes.

2.Select the new programme, temperature, any options and another spin speed if you want.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

The “Drain/Reset” button cancels a programme before the end.

•Press the “Drain/Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06177

Black process 45.0° 100.0 LPI