Whirlpool AWO/C 7808 Product Sheet

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

Cotton

with prewash

95 °C

Cotton

30 - 40 - 60 °C

Synthetics

with prewash

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

Wool/Handwash

Cold - 40 °C

Cotton

40 - 60 °C

Rinse & Spin

Spin

Short Spin

Drain

i : option / Yes : dosing required

1) Do not use liquid detergents.

Βαμβακερά

95 °C

Βαμβακερά

30 - 40 - 60 °C

Συνθετικά

60 °C

Συνθετικά

30 - 40 - 60 °C

Ευαίσθητα

30 °C

Γρήγορο

πλύσιμο

Πλύσιμο στο

Βαμβακερά

Ξέβγαλμα &

Ήπιο στύψιμο

Αποστράγγιση

30 °C

Μάλλινα/

χέρι

Κρύο - 40°C

40 - 60°C

Στύψιμο

Care

Labels

–

C D

X00/X00

Max. Load

- respect the manufacturer's recommendations on the care label

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can

7.0

add an oxygen-based bleach additive which can be used at 95°C.

This programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton

7.0 and linen.

Heavily soiled laundry made of artificial fibres (like polyester, polyacryle, viscose etc.) or their blends

3.0 with cotton.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their

3.0 blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

3.0

Brief programme to refresh your laundry.

Textiles made of silk, linen, wool and viscose (respect care label!) marked as handwashable or

1.0

machine-washable. This programme is tested and approved by The Woolmark Company for machine- and

handwashable wool.

Normally soiled cotton laundry. Most favourable programme in terms of combined water and energy

7.0

consumption for washing cotton laundry. - Reference programme for the Energy Label.

7.0 Same as the last rinse and the final spin in the “Cotton” programme.

7.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

– Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0619

Type of wash / Notes

E. Programme selector

F. “ Start(Pause)” button

G. Programme sequence indicator

H. “Reset” button

Detergents and Additives Special options

Pre-

Main

wash

Yes Yes

– Yes

Yes Yes

– Yes

– –

– – –

– – – – – –

Softener Spin speed

Wash

reduction

X00/X00

στροφές

i i i

i i

i i i

Whirlpool is a registered trademark of Whirlpool USA.

Rinse hold

Ακύρωση

ξεβγάλματος

– Max.

5019 300 00026

Max.

Spin Speed

rpm

Max.

CONSUMPTION DATA

Programme

Cotton with prewash 95 7.0 84** 2.40 2:28

Cotton 60 7.0 54 1.19 2:20 Cotton

Synthetics with prewash 60 3.0 63** 1.00 1:53

Synthetics 60 3.0 50** 0.80 1:35 Synthetics

Delicates 30 1.5 60 0.50 0:46

Quick wash 30 3.0 45 0.30 0:30 Wool/Handwash 40 1.0 45 0.50 0:40 Wool/Handwash cold 1.0 45 0.10 0:35

Cotton * 60 7.0 54 1.05 4:00 Cotton * 60 3.5 40 0.85 3:00 *** Cotton * 40 3.5 40 0.65 3:00

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). * Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Automatic adaptation of programme duration after detection of wash load

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Temperature

(°C)

Load

(kg)

7.0 69

3.0 46

Load the laundry, close the door and add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired programme and temperature.

• The indication lamp next to “Start(Pause)” button blinks.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights

Power consumption in off-mode 0.11 W / in left-on mode 2.32 W

Water

(l)

Energy

(kWh) without “Rapid”

0.75 2:10

0.50 1:20

Approx. programme

duration

(hours : minutes)

“Spin speed reduction” button

• Reduces the predetermined automatic

maximum spin speed to treat your laundry more gently.

“Rinse hold” button

• The laundry remains in the last rinse water

without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• Particularly useful if you want to postpone

spinning to a later time, or if you want to drain only.

• The programme stops to “Rinse hold” at the

time the “Rinse hold” indicator in the programme flow bar is on. The indication lamp next to the “Start(Pause)” button blinks.

switch off automatically.

Terminate the “Rinse hold” option :

• Press the “Start/Pause” button ; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector to the “Drain” programme and press the “Start(Pause)” button .

PROGRAMME START

Open the tap and press the “Start(Pause)” button. The indication lamp next to the “Start (Pause)” button lights up. The programme flow bar shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”: no or not sufficient

inlet water.

”Service”: failure or malfunction of an electrical component.

”Clean pump”: waste water is not pumped out.

Spin speed blinks: unbalance during spinning.

PROGRAMME END

• The “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start(Pause)” button to pause the programme. The light blinks.

2. Select the new programme (with temperature), and any options if you want.

3. Press the “Start(Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds. Any existing water is drained out. It may last some time until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 300 00026